Low-e glass also called Low radiation glass, is in the glass surface coating, multi-layer metal or other compounds on the membrane of the department of products. 1.Higher visible light transmittance and low reflectivity, indoor daylighting natural fully. 2.Lower the heat transfer coefficient U value, good heat insulation performance. 3.The lower solar energy through rate, effectively prevent solar radiation, summer air conditioning cost saving. 4.Blocking through ultraviolet ray, prevent furniture and color fading. 5.The product is made of composite, with good sound insulation performance.

Decapsulated artemia cysts 1. High nutrition value2. Good palatability3. Plain organism Natural food4. Excellent quality FeaturesDecapsulated Artemia cysts are made from BOHAI BAY cysts that have not broken diapause and will never hatch. The decapsulation procedure consists of chemically removing or oxidizing the outer chorion with a hypochlorite solution. All that remains following decapsulation is the bright orange embryo surrounded by a thin hatching membrane. The decapsulated cysts are neutralized and are completely digestible buy the fish or shrimp larvae. AdvantagesFeed the decapsulated Artemia cysts directly to the larviculture tanks. Do not incubate as with hatching cysts as these cysts will not hatch. As a feed source, decapsulated cysts have a higher energy and nutritional value than live Artemia nauplii as zero energy is consumed in the hatching process and lipids, amino acids, and enzymes are left intact. Storage and PackagingDecapsulated artemia cysts is packed in either 500g vacuum sealed cans, 12-cans per case. Also available in vacuum sealed 7.5kgs or 10 kgs pails. Decapsulated artemia cysts are stored in bulk, airtight drums under cold storage conditions (10 degrees C). Any other questions and comments, please let me know with no hesitation. We will serve for you within 12 hours.

MT1600-M1 Automatic Cold Laminator: Higher Quality with Minimal Cost Save more than one labor cost 50 centidegree cold lamination could thoroughly avoid bubble and snowflakes Great Yield with Highly Efficient Lamination Whole 50m roll lamination without askew Automatic back-film tear-off Single or unattended operation, 400sqm/h production No Winkles of thin back film, tight lamination of dark color picture. Biggest tectorial membrane width: 1580mm Biggest tectorial membrane thickness: 25mm Tectorial membrane speed: 0-8m/min Temperature setting range: 10 centidegree-60 centidegree Rubber roll promotion way : Unilateral linkage promotion Rubber roll heating way: Infrared internal heating Rubber roll preheat interval: 5-10 min Continuous working power loss: 0.3-0.5kw/h Fixed power input: 1200W Fixed input voltage: 110V/220V Machine weight: 200kg External dimensions: 1865mm*650mm*1140mm

MT1300-F2 Automatic Hot Laminator: Higher Quality with Minimal Cost Save more than USD0.30 cost for every square meter Fine reducibility of colors, high transparency, without any bubble and snowflakes Great Yield with Highly Efficient Lamination Whole 50m roll lamination without askew Single or unattended operation, 200sqm/h production No Winkles of thin back film, tight lamination of dark color picture. Applicable for Low Temprature Heating Cold Lamination 50℃ cold lamination, could completely avoid bubble and snowflakes Automatic back-film tear-off Single or unattended operation, 380sqm/h production Biggest tectorial membrane width: 1280mm Biggest tectorial membrane thickness: 25mm Tectorial membrane speed: 0-8m/min Temperature setting range: 10 ℃-140 ℃ Rubber roll promotion way : Unilateral linkage promotion Rubber roll heating way: Infrared internal heating Rubber roll preheat interval: 10-15 min Continuous working power loss: 0.8-1kw/h Fixed power input: 2000W Fixed input voltage: 110V/220V Machine weight: 180kg External dimensions: 1615mm*650mm*1140mm

MT1600-F1 Automatic Hot Laminator: Higher Quality with Minimal Cost Save more than USD0.30 cost for every square meter Fine reducibility of colors, high transparency, without any bubble and snowflakes Great Yield with Highly Efficient Lamination Whole 50m roll lamination without askew Single or unattended operation, 200sqm/h production No Winkles of thin back film, tight lamination of dark color picture. Applicable for Low Temprature Heating Cold Lamination 50℃ cold lamination, could completely avoid bubble and snowflakes Automatic back-film tear-off Single or unattended operation, 400sqm/h production Biggest tectorial membrane width: 1580mm Biggest tectorial membrane thickness: 25mm Tectorial membrane speed: 0-8m/min Temperature setting range: 10 ℃-140 ℃ Rubber roll promotion way : Unilateral linkage promotion Rubber roll heating way: Infrared internal heating Rubber roll preheat interval: 10-15 min Continuous working power loss: 0.8-1kw/h Fixed power input: 2500W Fixed input voltage: 110V/220V Machine weight: 230kg External dimensions: 2070mm*700mm*1200mm

Catalytic Antimony Trioxide Antimony trioxide is a white fine powder and the main crystal structure is of cubical shape. Product Specification: Sb2O3 99.80: Sb2O3: 99.80%min; As2O3: 300ppmmax; PbO: 300ppmmax; Fe2O3: 50ppmmax; CuO: 20ppmmax; Se: 20ppmmax; L: 96; B: 0.90; MOISTURE: 0.03%; SOLUBILITY IN 2N HCL (1%): Ok; ABSORBANCE OF 1% SOLN.IN MEG AT 420 NM, 5CM CELL: 0.04; White degree: 97; Average size(μm):0.3-0.6. Sb2O3 99.85: Sb2O3: 99.85%min; As2O3: 200ppmmax; PbO: 200ppmmax; Fe2O3: 20ppmmax; CuO: 20ppmmax; Se : 20ppmmax; L: 97; B: 0.90; MOISTURE: 0.02%; SOLUBILITY IN 2N HCl(1%): Ok; ABSORBANCE OF 1% SOLN.IN MEG AT 420 NM, 5CM CELL: 0.035; White degree: 97; Average size(μm): 0.3-0.6. Sb2O3 99.90: Sb2O3:99.90%min; As2O3: 50ppmmax; PbO: 50ppmmax; Fe2O3: 10ppmmax; CuO: 10ppmmax; Se: 5ppmmax; L: 97; B: 0.90; MOISTURE: 0.02%; SOLUBILITY IN 2N HCl(1%): Ok; ABSORBANCE OF 1% SOLN.IN MEG AT 420 NM, 5CM CELL: 0.03; White degree: 98; Average size(μm): 0.3-0.5. Packing: Packed in 25 kilograms multiwall paper bags, 40 bags per pallet. Each pallet is stretch wrapped in polythene to prevent shifting of the bags during transit. Or as customer's requirement. Product Description: This product used high quality antimony trioxide as the raw material and is grained by polymerization. It not only keeps special property of high quality antimony trioxide but also has no influence on the producing environment and workers' health because there is no dust in operation. Application: 1. Mainly used as polyester catalytic in the synthetic fiber industry. It is the product with high solubility in ethylene glycol and this allows the products to be introduced into the PET reactor as a solution or suspension instead of powder form. 2. It is widely used as a fire retardant in the membranes of plastic industry and the enclosures of electric devices and household electric appliances such as PVC, PP, PE, PS, ABS and PU, ect. 3. Used as filling, covering agents and retardants for rubber, ceramics, enamels, fabrics and fiber products. 4. Used as catalytic agent in organic synthesis.

Palmitoleic acid 30% from Sea Buckthorn berry. Omega 7 is palmitoleic acid, it has amazing internal and external health benefits. KINGHERBS' Omega 7 is derived from Sea Buckthorn, it helps to moisturize and soothe the body's sensitive internal organs, in particular the mucous membranes that line the stomach/GI tract, upper respiratory tract and vagina, as well as its beneficial, external skin benefits and anti-aging properties. It has an extensive history of traditional use in Tibet and Mongolia for the body's sensitive internal organs. Palmitoleic acid is the key source of Omega 7's amazing skin support properties. Palmitoleic acid is a naturally occurring component of healthy skin and is a highly effective antioxidant providing strong anti-aging support due to its ability control free radicals. This key constituent of Omega 7 is also a strong emollient, which is a substance that soothes and moisturizes the skin and promotes the regeneration of tissues. Besides omega 7, Sea buckthorn also contains dozens of phyto-nutrients which nourish the skin, and support digestive and mucous membrane health. It also contains full spectrum Vitamin E containing both tocopherols and tocotrienols. Vitamin E is well known for healing and repairing skin tissue. Phytosterols contained in Omega 7 provide unique wound healing benefits. The Omega 3, 6, and 9 fatty acids in Sea Buckthorn support our body's natural inflammatory response to promote healthy collagen, which improves skin tone and slows down aging of the skin. Omega 7 fatty acids are the predominant fatty acid in epithelial cell membranes. They are believed to play an important role in protecting the body's cell membranes from oxidative, physical and emotional stress. Sea buckthorn oil can contain up to 30% omega 7 fatty acids. KINGHERBS' omega 7 is produced by Supercritical CO2 Extraction, it allows Sea Buckthorn's broad spectrum of constituents to be extracted for optimal benefit. This process does not use hexane and other industrial solvents in the extraction process, which is much healthier for you and your skin. This Supercritical extraction process gently delivers the beneficial components of Sea Buckthorn in a low heat and CO2 environment. When looking for the best quality source of Omega 7, it is important to look for this type of extraction method to ensure the full health benefits of the Omega 7 are delivered and that they are free of any harsh solvent residues.

DLLY-601A Building Automation Trainer for technical schools I. Equipment Overview: DL-LY1801A is composed of Automatic gate (made of flexible patch board), rooms and passageway model . There are two rooms in the training equipment, we can use one stands for resident and one stands for computer control room, and we can also use the two rooms stands for two residents and automatic installation of electrical equipment of sluice model of intelligent parking management system. There are four walls (include the cap wall ) and a door to install. There are Resident room talkback system, security system, video monitoring system, fire-fighting system, cable TV system, integrated wiring system, air conditioning systems and automatic curtain system. There are DDC controller, WEB Release device, fire alarm host, Closed-circuit television monitoring, and talkback entrance guard system. There are passageway between two rooms, there are elevator group control system, fire control facilities and building monitoring facilities in it . II. Technical parameter 1. General power input: AC220V_4mm2, The third way to connect ground 2. Direct power output: universal three, AC220V_1.5mm2. 3. Controlled mode: switch, operation, stop (lock) button. 4. Controlled protect mode:16A Single-phase leakage protection switches, DC switching power supply. 5. Controlled output power: big safe inserted interface,AC220V_1.5mm2、DC24V_0.75mm2 ,DC18V_0.75m m2 ,DC12V_0.75mm2 6. DC power:DC24V_6A, DC18V_8A, DC12V_12A（Four work station） 7. Bus interface: small safe inserted interface, 0.25mm2 the maximum capacity 8 bits. 8. The computer network interface: RJ45 super five kinds of shielding（10/100Mbps）

DL-SF1 Two-axle Servo Motor Control Trainer for technical schools PLC: 1 Servo motor: 2 Step motor: 2 Screw roller: 2 Light pestle: 5 Security limit switches: 4 Servo motor driven: 5 Step motor driven: 2 Button: 13 Servo button: 2 Emergency stop button: power DC24V: 1 Aluminum frame: 1 Table: 1

Appearance(25℃): white solid powder Freezing Point(℃):58-62 Clarity and color of solution: Non-concentraded, not deeper than 2 # standard solution: Average molecular weight: 7500-8800 Viscosity: （m□/s）: 16-20 PH□ value: 5-7 Ignition Residue: ≤0.2 Storage: stored in dry place. Main function: □ PEG8000 is a kind of good coating materials,hydrophilic polishing materials, membranes and wall materials,plasticizers, lubricants and pills matrix. Be usded for the preparation of tablets, pills, capsules, microcapsules etc. □ It can be used as organic media, a moisturizing agent for daily cosmetic industry, viscosity-adjusting agent, wetting agent for paper and pesticide

Type Digital Partial Discharge Detecting Analytic System The HRJFD system has carried the ultrasonic measurement to the local discharge of the hundreds of transformers and reactor in Gezhou Dam 500kV switch station, Wuhan Phoenix Mountain 500kV transformer substation, Shengyang transformer factory, Hefei transformer factory, Hengyang transformer factory, Guangzhou power supply bureau, Hunan electricity generating board, Chongqing transformers factory and Wuhan steel. This system has the advantage of operation reliable and easy to operate. It can meet the needs of measurement. As one of the key items of the of eight-five project, this electrical device has been widely used for the spot test and research in the related unit in the north, east, central and northwest parts of China. The system has functions of hundred-percent process controlling mode and menu prompt in Chinese character. It can access and print arbitrarily. It can automatically generate survey reports and display two-dimensional and three-dimensional local discharge atlases. It is made by adopting the skin window technique and has a good capacity of resisting disturbance. It takes the techniques of two channel measurement and digital difference technique which is able to measure the local discharge signal of two samples or the two testing point of one sample. That is convenient for analyzing the origin of the local discharge signal. This product is the national key scientific and technological project and the extension project of the ministry of electric power. It has been tested in hundreds of transformers such as the Gezhou Dam 500kV switch station, Wuhan phoenix mountain 500kV transformer substation and Shenyang transformer factory. It is reliable and easy to operate. It is specially applied for measuring the local discharge of the eclectic devices such as the transformer, the electrical motor, the mutual inductor, the capacitor, the cable, the GIS, the switches and the lighting arrester. The performance is complied with the standard of IEC-270 and GB7354. It has the hundred-percent Chinese software and the menu mode operation. The measurement and analysis of the local discharge graph data can be arbitrarily accessed and printed. It has two channels and can produce test report automatically. It has many colorful display modes those are ellipse, straight line, two-dimension and three-dimension. Detection sensitivity: 0.5pC Measuring frequency bandwidth: 1-200 kHz Gain dynamic range: above 120dB Sampling precision: 8 bit ±1/2LSB The whole equipment also includes the mainframe, display and print. (It’s not including the voltage part) HRJFD Type On-Site Digital Partial Discharge Detecting Analytic System This system is specially applied for the field and spot check work in the electric equipment manufacturer, electricity generating and supplying department, electrical power construction, electrical installation and debugging construction enterprises. It is very convenient for measuring and fixing the database which is easy for further analysis and management. Technical parameter: Measuring channel: two channels Detection sensitivity: 0.1PC Measuring frequency range: 3dB bandwidth 10kHz~300 kHz Cell-type filter setting stage: Low end 10，20，40kHz High end 100，200，300kHz Gain dynamic range: 120dB Synchronizing frequency: 50,100,150,200 or any Hz Standard pulse generator: HRJFD-301 Full sized pulse voltage: 10V，5V，2V，1V，0.5V，0.2V (adjustable) Calibration capacity: 50pF, 200pF (adjustable) Working power supply: AC220V±10%，50Hz

DUCR DC over current relay for DC motor The milli-volt(mv) signals generated from the shunt and power supply are sensed by solid state circuitry and compared with preset overload setting.In case sensing overload condition,the internal relay switches contact after the preset delay.It has easier control operation.It has overload and DC under load protection relays. It has wide DC current protection range from 1A to hundreds Amps. DC ammeter maybe used instead of shunt(DC Ammeter has its own shunt inside and keep 50mv maintained.) Protection Protective item DCL DUCR Over-current O-time - Under-current(dry-run) - O-time Pls feel free to contact us if you are interested in our product.we will send you the more detail data after your kindly enquiry.

Thanks for your time, please Contact: Mike Hu (Mr.) Gmail: hzbchemsales@gmail.com Skype: mikehoo1980 * * * Chromium Polynicotinate Type: fine chemicals; food additive, nutritional supplement, feed stimulating [Molecular Formula]: Cr (C6H4NO2) 3 [Molecular Weight]: 418.33 [CAS No]: 64452-96-6 Assay: 98.0%min Packaging Detail: 25kg/drum [Properties]: Niacin Chromium is a small smoke gray powder, good fluidity, stable at room temperature, insoluble in water. In which the organic chelating trivalent chromium chromium, can be passed directly on the cell membrane, can enhance insulin activity, improve glucose metabolism in the human body. Department of Agriculture Bulletin No. 658 approving the product for the new feed additive. [Effect]: 1, Promote animals growth rate,and promote protein synthesis 2, Promote gonadal development, Improve the quality of ovulation, improve reproductive performance. 3, Ketone bodies decreased fat, increased lean meat ratio, meat quality significantly improved. 4, Improve the fertilization rate and chicken egg laying rate the quality and reduce the ratio of meat and eggs. 5, Enhance immune function, increased stress and reduce disease. Healthcare agent; Nutritional supplement: Ubidecarenone (Coenzyme Q10) 303-98-0 Melatonin, 73-31-4 Nicotinamide 98-92-0 Inosine 58-63-9 Oryzanol, 11042-64-1 Vitamin E Acetate, 7695-91-2 D-Panthenol 81-13-0; 16485-10-2 Rutin, 153-18-4 Tea Polyphenol, 84650-60-2 Scopolamine 51-34-3 Scopolamine Hydrobromide 114-49-8 D-Biotin 58-85-5 Beta Carotene 7235-40-7 Phytosterol (Rice Bran Sterol) 83-46-5 Inosine, Hypoxanthine ribonucleoside; Aminosine 58-63-9 Papain 9001-73-4 Yohimbine hydrochloride 65-19-0 Pramiracetam 68497-62-1 Edaravone 89-25-8 Gamma-aminobutyric acid (GABA) 56-12-2

Thanks for your time, please Contact: Mike Hu (Mr.) Gmail: hzbchemsales@gmail.com Skype: mikehoo1980 * * * promethazine hydrochloride 58-33-3 Catalog: pharmaceutical chemicals; anti inflammation APIs, skin care agent Standard: BP2009 Assay: 99.0%min Appearance: White crystalline powder Package: 25kgs per paper drum ************************** Melting point: 222.5 °C Flash point: >110℃ CAS: 58-33-3 Formula: C17H20N2S・HCL Molar mass: 320.88 Use: It is used for the skin and mucous membrane allergies, allergic rhinitis, asthma, food allergies, skin disease, carsickness and seasickness Anti inflammatory anti infection Agents Betamethasone 378-44-9 Beclometasone Dipropionate 5534-09-8 Dexamethasone 50-02-2 Dexamethasone Sodium Phosphate 2392-39-4 Dexamethasone Acetate 1177-87-3 Indometacin; Indomethacin 53-86-1 Triamcinolone Acetonide 76-25-5 Ciprofloxacin hydrochloride 86393-32-0 Dexketoprofen Trometamol 156604-79-4 Diclofenac Sodium 15307-79-6 Diclofenac Potassium 15307-81-0 Promethazine hydrochloride 58-33-3 Berberine Hydrochloride 633-65-8 Erdosteine 84611-23-4 Analgesics Agents: Phenacetin 62-44-2 Diclofenac Sodium 15307-86-5 Ibuprofen 15687-27-1 Ketoprofen Lysinate 57469-78-0 Celecoxib (Celebrex) 169590-42-5 Lornoxicam 70374-39-9

Active Ingredient: Silymarin Specification: 80% Test Method UV-VIS Details Healers have used the prickly milk thistle plant to treat liver ailments for more than 2,000 years. Somehow these early practitioners figured out that preparations of this purple-flowered member of the sunflower family could stimulate the flow of bile from the liver, improving digestion and various liver-related ills. Interestingly, bile and other bodily fluids, also known as humors, were once associated with different personality types. Because it was thought that black bile was inherent to a melancholic nature, milk thistle was prescribed for treating depression and melancholy (which actually means "black bile"). Today, the word "biliousness" and the phrase "having excess bile" are still used to describe negative personality traits. While milk thistle is no longer seen as a remedy for melancholy, hundreds of medical studies have substantiated the fact that the herb does indeed protect and heal the liver. European physicians currently consider milk thistle a mainstay for liver disorders ranging from hepatitis to cirrhosis. But even though a 19th-century American medical group called the Eclectics prescribed milk thistle for liver ailments, it has never been widely used in the U.S. for healing purposes. Milk thistle grows throughout the world (including North America) in both cultivated and wild form. Many sources refer to the herb, by its botanical name, Silybum marianum, as well as by its active compounds, collectively known as silymarin. Concentrated stores of silymarin are found in the herb's shiny black fruits (seeds), which are typically collected at summer's end. Health Benefits Although most widely associated with liver complaints, milk thistle is also being examined for treating a variety of other disorders, from gallstones and high cholesterol to skin cancers and allergy symptoms. As a potent antioxidant, the versatile milk thistle extract helps prevent highly reactive oxygen molecules called free radicals from damaging cells throughout the body, but especially in the liver, stomach, and intestines. An injectable form of milk thistle is a powerful antidote to mushroom poisoning. And the oral extract shows promise for minimizing chemotherapy-associated liver damage. This is a function of the herb's antioxidant actions as well as its ability to accelerate the excretion of toxic compounds that can accumulate in the body. Specifically, milk thistle may help to: Treat acute and chronic liver disease. Milk thistle "cleanses" and therefore fortifies the liver, a vital organ responsible for processing everything from nutrients in foods to medications and chemical pollutants. The herb partly accomplishes this task by preventing a reduction in concentrations of glutathione, an amino-acidlike compound that is critical to neutralizing toxins. Some studies indicate that milk thistle can actually increase glutathione levels by as much as 35%. In addition, silymarin alters the outer membrane of liver cells in such a way that toxins are barred from entering. It even encourages the formation of new, healthier liver cells to replace old, damaged ones. Various types of liver damage benefit from these remarkable properties, and the herb has repeatedly demonstrated its power to do so. In the largest trial to date specifically studying the use of milk thistle for chronic liver disease, more than 2,500 people suffering from this condition showed improvement in their liver function tests when taking the extract. Many also reported that they felt better. People with an acute form of liver disease--acute viral hepatitis--also stand to benefit from milk thistle. In a double-blind study reported in 1998, the extract improved the results of liver function tests, speeded recovery, and reduced the length of hospital stays as compared with a placebo.

The sticking film machine is mainly designed for sticking protective film and riot film on the screen&panel of the electronic, communications industries product.The details is following. Automatic sticking film of the touch screen is designed to adapt to stick the touch screen mobile phone lens, digital photo frame, car navigation systems, with optical adhesive film, protective film, explosion-proof membrane film, polarizer high precision and no bubbles fit the requirements of the development of precision sticking film machine. The photoelectric sensor XY direction of the high accuracy position automatic proofreading, to ensure the accuracy of the fitting process. By the PLC, fit bodies, and components of the feed mechanism, the man-machine interface. The device is characterized by small size, positioning reliable, secure; PLC control, feeding positioning servo system control, display and operation of the human-machine interface, high precision control, easy to adjust. The machine ensure that no bubbles and no scratches when sticking film.Have Stable performance, sticking film with high precision, high work efficiency, and greatly improves the production efficiency and product qualification rate.So around the world related industries widely use. Technical parameters 1， fitting accuracy: ± 0.10mm 2， the efficiency of fitting :6-16pcs / min. 3，Maximum fit size: 5.0 inches 4，Correction methods: XY correction 5， fit results: smooth, without folds 6， Work cleanliness: one hundred and efficient filter (optional) 7，Working voltage: AC220V 50/60Hz 8，Gas supply pressure: ≥ 0.6Mpa

Polyhexamethyleneguanidine Hydrochloride (PHMG) CAS No.: 57028-96-3 Molecular formula: (C7H15N3)n.x(HCl) Molecular Weight: 1000-3000 Property: PHMG is a kind of colorless or light yellow solid or liquid. PHMG is soluble in water and free of erosion. PHMG is environmental-friendly and free from iodine, chlorine, aldehyde and alcohol. Specification: Item Index Appearance Colorless Or Light Yellow, Solid Or Liquid Active Components 25% Solubility In Water Complete Odor No Decomposition Temperature >400 ° C Surface Tension (0.1% In Water) 49.0dyn/cm2 Biological Decomposition Complete Function Harmless And Bleach-free Storage Two Years Before Open Risk Incombustible & Non-explosive Toxicity 1%PHMG LD 50 > 5000mg/kgBW Shelf Life 2 Years Corrosiveness (Metal) Corrosive-free To Stainless Steel, Copper, Carbon Steel And Aluminum PH Neutral Usage: PHMG is able to completely destroy a variety of bacteria, including Colon Bacillus, S. Aureus, C. Albicans, N. Gonorrhoeae, Salm. Th. Murum, Pseudomonas Aeruginosa, Listeria Monocytogenes, S.Dysenteiae, ASP. Niger, Brucellosis, C. Parahaemolyticus, V. Alginolyticus, V. Anguillarum, A.Hydrophila, Sulfate Reduction Bacteria etc. PHMG can be used to clean skin and mucous membrane, clothes, surfaces, fruits and indoor air. PHMG is also applicable for disinfection in aquaculture, livestock farming and oil exploration. PHMG has good preventive and curative effects on fungus-caused farming diseases such as Grey Mildew, Sclerotinia Rot, Bacterial Spot, Rhizoctonia Solani And Phytophthora etc. Package and storage: PHMG is packed in 5kg/PE drum×4/ box, 25kg/PE drum and 60kg/PE drum. Sealed storage in room temperature, away from direct sunlight. Shelf Life: 2 years Keywords: PHMG, Polyhexamethyleneguanidine Hydrochloride;

(Shirley at virginforestplant dot com) 1 English name: Black Cohosh P.E. 2 Plant Origin: Cimicifuga racemosa 3 Appearance: Brown fine powder with characteristic odor and taste 4 Specification: BLC-Tritepene 2.5%, 8% according to your requirement. 5 Test method: HPLC 6 Actions: It has the similar function as estrogen. The apparent healing properties of Black cohosh root extend beyond its use for "women's problems." Thought to work as an anti-inflammatory and mild sedative, black cohosh may relieve muscle aches and pains. It has also been used to clear mucous membranes. 7 The package: 2.5 kg/bag, double vacuum packing inside, 25 kg/carton or according to customer requirement. Here is our special items for your reference: (1) Fucoxanthin 5%,10% (2) Horny Goat Weed Extract 4:1,10:1,10%,20%,40%,50%,60% (3) Blueberry Anthocyanin5%, 10%, 20%, 30%, 40% (4) Arbutin,10%, 20%, 25%, 98% (5) Capsaicin,10%, 40%, 95%, 98%, 99% (6) Lycopene 10%, 20%, 80%, 90%, 95% (7) Soybean P.E. 40%,80% (8) Grape Seed Extract 90%, 95% (9) Ginkgo Leaf Extract (10) Bilberry Anthocyanin 5%, 10%, 20%, 40%, 50% Tel: 0086-452-6188933 Fax: 0086-452-6188355 our mail box is shirley at virginforestplant dot com Email: Shirley@virginforestplant.com Shirley8622@hotmail.com Web: http://www.virginforestplant.com http://www.virginforestplant.com.cn

(Shirley at virginforestplant dot com)1.Latin Name: Rhododendron Simsii Planch 2.Specification : 50% Proanthocyanidins (UV-VIS) /70% Proanthocyanidins (UV-VIS)3.Part of the Plant Used:Leaf4.Extract Method:Grain Alcohol/Water5 Function:Dahurian Rhodoendron Extract possess benign possess whitening effect . Through study, it is a multi-purpose whitening ingredients, and also having the effects of moisture, regulating sebum production, increasing skin elasticity, and other effects. Azaleas acid itself has adjusted the normalization of the skin secretion of sebum, antibacterial and remove the black spot, meanwhile its skin and mucous membranes organizations with high security, or even can be applied to oral drugs. 6.The package: with vacual double aseptic food poly bags inside. 25kgs per carton with 10 bags inside,2.5kg per bag. Or according to customer requirement. Here is our special items for your reference: (1) Fucoxanthin 5%,10% (2) Horny Goat Weed Extract 4:1,10:1,10%,20%,40%,50%,60% (3) Blueberry Anthocyanin5%, 10%, 20%, 30%, 40% (4) Arbutin,10%, 20%, 25%, 98% (5) Capsaicin,10%, 40%, 95%, 98%, 99% (6) Lycopene 10%, 20%, 80%, 90%, 95% (7) Soybean P.E. 40%,80% (8) Grape Seed Extract 90%, 95% (9) Ginkgo Leaf Extract (10) Bilberry Anthocyanin 5%, 10%, 20%, 40%, 50% Tel: 0086-452-6188933 Fax: 0086-452-6188355 our mail box is shirley at virginforestplant dot com Email: Shirley@virginforestplant.com Shirley8622@hotmail.com Web: http://www.virginforestplant.com http://www.virginforestplant.com.cn

CAS:75-07-0 MF:C2H4O MW:44.05 EINECS:200-001-8 Product Categories:Industrial/Fine Chemicals;Detection of Amines for Primary & Secondary Amines (for Detection of Free Amine on the Resins);Combinatorial Chemistry;Synthetic Organic Chemistry;A-B;Alphabetical Listings;Flavors and Fragrances;A;AA to AL;Alphabetic;A-BFlavors and Fragrances;Certified Natural Products Mol File:75-07-0.mol mp -123 °Cbp 65-82 °C density 1.09 g/mL at 25 °C(lit.) vapor density 1.03 (vs air) vapor pressure 52 mm Hg ( 37 °C) FEMA 2003refractive index n20/D 1.377 Fp 133 °F storage temp. 2-8°C form solution Water Solubility > 500 g/L (20 □C) Merck 14,39 BRN 505984 Stability:Stable, but air sensitive. Substances to be avoided include strong oxidizing agents, strong acids, reducing agents, alkalies, halogens, halogen oxides. Highly flammable. Vapour/air mixtures explosive over a very wide concentration range. May form peroxides in storage. CAS DataBase Reference75-07-0(CAS DataBase Reference) NIST Chemistry ReferenceAcetaldehyde(75-07-0) Chemical Properties:Colourless clear liquid Usage:Acetaldehyde is used as intermediate for syntheses of bulk chemicals, e.g. ethyl acetate, acetic acid, acetic anhydride, isooctylalcohol, pentaerythrite, pyridines, etc. For specific dyes, e.g. C.I. 46040 Basic Yellow 9. Product Data Sheet General Description:A clear colorless liquid with a pungent choking odor. Flash point -36°F. Boiling point 69°F. Density 6.5 lb / gal. Vapors are heaver than air and irritate the mucous membranes and especially the eyes. Used to make other chemicals. Air & Water Reactions:Highly flammable. Easily oxidized by air to form unstable peroxides which may explode. Forms explosive mixture with air above 100°C (30-60% of the vapor in air) owing to formation of peroxyacetic acid [White, A. G. et al., J. Soc. Chem. Ind., 1950, 69, p. 206]. Soluble in water. Reactivity Profile:Acetaldehyde undergoes a vigorously exothermic condensation reaction in contact with strong acids, bases or traces of metals. Can react vigorously with oxidizing reagents such as dinitrogen pentaoxide, hydrogen peroxide, oxygen, silver nitrate, etc. Contamination often leads either to reaction with the contaminant or polymerization, both with the evolution of heat. Can react violently with acid anhydrides, alcohols, ketones, phenols, ammonia, hydrogen cyanide, hydrogen sulfide, halogens, phosphorus, isocyanates, concentrated sulfuric acid, and aliphatic amines. Reactions with cobalt chloride, mercury(II) chlorate or perchlorate form sensitive, explosive products [Sax, 9th ed., 1996, p. 5]. An oxygenation reaction of Acetaldehyde in the presence of cobalt acetate at -20°C exploded violently when stirred. The event was ascribed to peroxyacetate formation [Phillips B. et al., J. Am. Chem. Soc., 1957, 79, p. 5982]. Health Hazard:Breathing vapors will be irritating and may cause nausea, vomiting, headache, and unconsciousness. Contact with eyes may cause burns and eye damage. Skin contact from clothing wet with the chemical causes burns or severe irritation.

1. LED Sources: Double Integrated High Power LED(170W). 2. Luminous Efficiency: ≥80lm/W 3. Input Voltage: AC(85V～265V )/ frequency(50～60Hz) DC(12V 24V) 4. Power Factor(PF): >0.9 5. Efficiency: 100lm/w 6. Efficiency of the Power Supply: >90% 7. Effective Light Angle: 140 Degree 8. Color Rendering Index: >80 9. Color Temperature: 2700K～7000K 10. Net Weight(kg): 15.5 KG 11. Materials: High-purity aluminium 12. Vacuum metallic membrane plating reflector 13. High intensity toughened glass covers 14. Perfect combination with solar energy 15. Life Span: >50,000 hours 16. IP Rating: IP65 17. Lower maintenance charges. 18. Save 50%-75% electricity cost comparing with sodium street lights 19. No delay start 20. Eco-friendly: No UV, IR, leads or mercury

Description: 1.Weight(g/m2): 750 2.Material: 100%PTFE 3.Thickness(mm): 1.1 4.Air permeability(L/m2/s):150~250 5.Finishing treatment: singed calendered heat set Temperature resistant: 240~ 274 °C Benefits∶ - Excellent steady under high temperature - Excellent resistance to chemical, acid and alkali - Very high filtration efficiency - Low pressure loss - Excellent dust cake release - Long service life We can make PTFE membrane treatment on all the needle felts.

PTFE membrane is the most common treatment for needle felts. It provides an excellent combination of filtration efficiency and dust cake release. We can make PTFE membrane treatment on all the needle felts. Specification: Weight (g/m2) : 500 Thickness (mm) :1.8 Air permeability ;30-60L/m2.s Breaking strength N/5*20cm :warp 1000 ;weft1100 Elongation(%) :warp 37; weft 35 Constant working temperature 130 Centi degree Instant working temperature :160centi degree Benefits: - Excellent steady under high temperature - Excellent resistance to chemical, acid and alkali - Very high filtration efficiency - Low pressure loss -- Excellent dust cake release - Long service life

Benefits: excellent abrasion resistance high dimensional stability high breaking strength good cake release long service life □ Applications:□ disc filter, centrifugal drier, plate & frame filter press, membrane chamber filter press

With technology developing in ship building industry, this kind of gantry crane fulfills the demands of large plate and long weld. Therefore, shipbuilding gantry crane appeared with big span and lift capacity. Good performance in function and operation, and better structural design and easy maintenance are the features of shipbuilding gantry crane. The structure of shipbuilding gantry crane has single and double girder types. Single girder type is more economic if bigger span and lift capacity is a necessary requirement. Its main composing system includes steel gantry structure, upper trolley, lower trolley, crane travel mechanism, maintenance crane, lubrication and electrical device. And rail clamp, wheel brake, anchors and load cell, wind speed and direction indicator, limit switches in each mechanism are used. Crane deviation adapting system may be used when span is larger. Our shipbuilding gantry crane has the features of longer span and bigger lift capacity and height to guarantee accurate segments connection in different work conditions in shipyard. Standards applicable:crane safety specifications(GB6067-85),crane designing standards(GB3811-83)gantry crane technical requirements (GB14406-1993)and ISO standards, FEM standards.

K240b sidac vbo: 220--250, ih: <56ua, vdrm: 180V do-15 The sidac is a silicon bilateral voltage triggered switch with greater power-handling capabilities than standard diacs. Upon application of a voltage exceeding the sidac breakover voltage point, the sidac switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops continues until the current is interrupted or drops. The use of sidac diode: 1. HIgh-voltage lamp ignitors 2. Natural gas ignitors 3. Gas oil gnitors 4. High-voltage power supplies 5. Xenon ignitors 6. Over-voltage protector 7. Pulse generators 8. Flurescent lighting ignitors 9. HID lighting ignitors

cutting area 1200mm*900mm Maximum Paper Width 1050mm vacuum absorbing Import synchronous belt driving material cutting materials PC, PET, covering film, flexible circuits, membrane switches, photoelectric materials, dust-proof net, insulation materials, thermal conductivity material, self-adhesive stickers and other materials cutting way drawing by pen,half cutting,whole cutting cutting thickness 0.5-2mm cutting precision less than or equal 0.1mm max speed 1000mm/s 1) saving sample cost as your company do not knife mould 2) completing cutting operation in one minute , saving delivery time. Improve enterprise competitiveness 3) just need modify the CAD file for the new sample 4) using for a lot of specification and small batch production. 5) Do not need to spend expensive cost for the knife mould 6) Equal to die mold effect,no nigrescence, no charred aokecut@163.com work time and character continuous work,operating computer and cutting at the same time,linear high-speed transmission for data transmitting port international standards:parallel port/RSC232 serial port capacity of bufferarea buffer area of large capacity,it can finish high-speed transmission on for data at a time intruction set international standards :HP-GL or DM-PL form can be selected,it is compatible with all kinds of CAD softwares numerical control board LTD,all-english operating menu,contacbutton tool type special steel blade voltage AC 220V±10% 50 HZ fuse standard 5A

cutting area 900mm*600mm Maximum Paper Width 760mm vacuum absorbing Import steel belt driving material cutting materials PC, PET, covering film, flexible circuits, membrane switches, photoelectric materials, dust-proof net, insulation materials, thermal conductivity material, self-adhesive stickers and other materials cutting way drawing by pen,half cutting,whole cutting cutting thickness 0.5-2mm cutting precision less than or equal 0.05mm max speed 1000mm/s 1) saving sample cost as your company do not knife mould 2) completing cutting operation in one minute , saving delivery time. Improve enterprise competitiveness 3) just need modify the CAD file for the new sample 4) using for a lot of specification and small batch production. 5) Do not need to spend expensive cost for the knife mould 6) Equal to die mold effect,no nigrescence, no charred aokecut@163.com work time and character continuous work,operating computer and cutting at the same time,linear high-speed transmission for data transmitting port international standards:parallel port/RSC232 serial port capacity of bufferarea buffer area of large capacity,it can finish high-speed transmission on for data at a time intruction set international standards :HP-GL or DM-PL form can be selected,it is compatible with all kinds of CAD softwares numerical control board LTD,all-english operating menu,contacbutton tool type special steel blade voltage AC 220V±10% 50 HZ fuse standard 5A

cutting area 1200mm*900mm Maximum Paper Width 1050mm vacuum absorbing Import steel belt driving material cutting materials PC, PET, covering film, flexible circuits, membrane switches, photoelectric materials, dust-proof net, insulation materials, thermal conductivity material, self-adhesive stickers and other materials cutting way drawing by pen,half cutting,whole cutting cutting thickness 0.5-2mm cutting precision less than or equal 0.05mm max speed 1000mm/s 1) saving sample cost as your company do not knife mould 2) completing cutting operation in one minute , saving delivery time. Improve enterprise competitiveness 3) just need modify the CAD file for the new sample 4) using for a lot of specification and small batch production. 5) Do not need to spend expensive cost for the knife mould 6) Equal to die mold effect,no nigrescence, no charred aokecut@163.com work time and character continuous work,operating computer and cutting at the same time,linear high-speed transmission for data transmitting port international standards:parallel port/RSC232 serial port capacity of bufferarea buffer area of large capacity,it can finish high-speed transmission on for data at a time intruction set international standards :HP-GL or DM-PL form can be selected,it is compatible with all kinds of CAD softwares numerical control board LTD,all-english operating menu,contacbutton tool type special steel blade voltage AC 220V±10% 50 HZ fuse standard 5A

cutting area 900mm*600mm Maximum Paper Width 760mm vacuum absorbing Import synchronous belt driving material cutting materials PC, PET, covering film, flexible circuits, membrane switches, photoelectric materials, dust-proof net, insulation materials, thermal conductivity material, self-adhesive stickers and other materials cutting way drawing by pen,half cutting,whole cutting cutting thickness 0.5-2mm cutting precision less than or equal 0.1mm max speed 1000mm/s 1) saving sample cost as your company do not knife mould 2) completing cutting operation in one minute , saving delivery time. Improve enterprise competitiveness 3) just need modify the CAD file for the new sample 4) using for a lot of specification and small batch production. 5) Do not need to spend expensive cost for the knife mould 6) Equal to die mold effect,no nigrescence, no charred aokecut@163.com work time and character continuous work,operating computer and cutting at the same time,linear high-speed transmission for data transmitting port international standards:parallel port/RSC232 serial port capacity of bufferarea buffer area of large capacity,it can finish high-speed transmission on for data at a time intruction set international standards :HP-GL or DM-PL form can be selected,it is compatible with all kinds of CAD softwares numerical control board LTD,all-english operating menu,contacbutton tool type special steel blade voltage AC 220V±10% 50 HZ fuse standard 5A

Main Products Zhejiang Heading Filter Material Co., Ltd Industrial filter material, nonwoven needle felt （PET , PP , Acrylic，Nomex Metamax Aramid，PPS，Glass Fiber，P84，PTFE, FNS, water and oil repellent，antistatic，PTFE member coated ）,woven fabric（PET, PP, PA,PVA, Glass Fiber ）, dust collect bag, liquid filter bag, press filter cloth, air filter bag, dust collect support ,air slide, filter mesh, mesh net, industrial thread , venturi pipe

Synonyms:Acetaldehyd;acetaldehyde(ethanal);Acetaldeyd;Acetaldeyde;Acetylaldehyde;Aldehyde acetique;aldehydeacetique;Aldeide acetica CAS:75-07-0 MF:C2H4O MW:44.05 EINECS:200-001-8 Product Categories:Industrial/Fine Chemicals;Detection of Amines for Primary & Secondary Amines (for Detection of Free Amine on the Resins);Combinatorial Chemistry;Synthetic Organic Chemistry;A-B;Alphabetical Listings;Flavors and Fragrances;A;AA to AL;Alphabetic;A-BFlavors and Fragrances;Certified Natural Products Mol File:75-07-0.mol mp -123 °Cbp 65-82 °C density 1.09 g/mL at 25 °C(lit.) vapor density 1.03 (vs air) vapor pressure 52 mm Hg ( 37 °C) FEMA 2003refractive index n20/D 1.377 Fp 133 °F storage temp. 2-8°C form solution Water Solubility > 500 g/L (20 □C) Merck 14,39 BRN 505984 Stability:Stable, but air sensitive. Substances to be avoided include strong oxidizing agents, strong acids, reducing agents, alkalies, halogens, halogen oxides. Highly flammable. Vapour/air mixtures explosive over a very wide concentration range. May form peroxides in storage. CAS DataBase Reference75-07-0(CAS DataBase Reference) NIST Chemistry ReferenceAcetaldehyde(75-07-0) Chemical Properties:Colourless clear liquid Usage:Acetaldehyde is used as intermediate for syntheses of bulk chemicals, e.g. ethyl acetate, acetic acid, acetic anhydride, isooctylalcohol, pentaerythrite, pyridines, etc. For specific dyes, e.g. C.I. 46040 Basic Yellow 9. Product Data Sheet General Description:A clear colorless liquid with a pungent choking odor. Flash point -36°F. Boiling point 69°F. Density 6.5 lb / gal. Vapors are heaver than air and irritate the mucous membranes and especially the eyes. Used to make other chemicals. Air & Water Reactions:Highly flammable. Easily oxidized by air to form unstable peroxides which may explode. Forms explosive mixture with air above 100°C (30-60% of the vapor in air) owing to formation of peroxyacetic acid [White, A. G. et al., J. Soc. Chem. Ind., 1950, 69, p. 206]. Soluble in water. Reactivity Profile:Acetaldehyde undergoes a vigorously exothermic condensation reaction in contact with strong acids, bases or traces of metals. Can react vigorously with oxidizing reagents such as dinitrogen pentaoxide, hydrogen peroxide, oxygen, silver nitrate, etc. Contamination often leads either to reaction with the contaminant or polymerization, both with the evolution of heat. Can react violently with acid anhydrides, alcohols, ketones, phenols, ammonia, hydrogen cyanide, hydrogen sulfide, halogens, phosphorus, isocyanates, concentrated sulfuric acid, and aliphatic amines. Reactions with cobalt chloride, mercury(II) chlorate or perchlorate form sensitive, explosive products [Sax, 9th ed., 1996, p. 5]. An oxygenation reaction of Acetaldehyde in the presence of cobalt acetate at -20°C exploded violently when stirred. The event was ascribed to peroxyacetate formation [Phillips B. et al., J. Am. Chem. Soc., 1957, 79, p. 5982]. Health Hazard:Breathing vapors will be irritating and may cause nausea, vomiting, headache, and unconsciousness. Contact with eyes may cause burns and eye damage. Skin contact from clothing wet with the chemical causes burns or severe irritation.

Type High Degree of Accuracy SF6 Leak Detector The instrument is the patented product as the transformation from the achievements in scientific research. It is the best SF6 leak detector equipment in China. The equipment is endowed with the strengths from Germany and Japan’s experience and overcomes weaknesses. This instrument can be applied to the leak hunting of the SF6 switches in the power supply department, the SF6 high voltage switch gear factory and the electric testing and researching institute. It is also can be used as the assorted equipment of the electric device and export product for the SF6 high voltage switch gear factory. Brief introduction: HRLF-ID Digital High Precision SF6 Gas Leak Detector is the optimization product of our company which is latest upgraded and designed. It has the advantages of the high sensitivity and stability. The testing operation is simple, direct, fast and with a high response speed. The search unit will never be poisoning and cause poisonous gas. The high degree of automatic instrument can display the gas strength by liquid crystal screen which makes the reading data more convenient and accurate. When there is different strength of SF6 gas and other halogen gas in the air, the ionized degree of the mixed gas will be different under the effect of the electromagnetic field of high frequency. Application field: This instrument is mainly applied for the leaking finding of equipment and container which are filled with the SF6 and other halogen gas in the ministry of water conservancy and electric power, the manufacturing engineering of electronic device, and the metallurgy of iron and steel, the petrochemical industry, the railway transportation, the mining industry, the extinguisher apartment and the atomic physics research institute. The main technical parameter: Range of measurement: （SF6）∶ 10-8 ～10-2 （volume rate） Time of response: no more than 3 seconds (10-4 gas) Indication mode: digital numerical quantitative indication and audio, optical signal Length of the vacuum hose: 4 meters Continuous working period: no more than 4 hours Working condition: Alternating current power: 220V±22V, 50Hz±2Hz Environmental temperature: -5℃～+45℃ Relative humidity: no more than 85% Electric power consumption: about 270W Size (length, wide, height): 510×330×480mm Gross weight: about 20kg

DINP Product Name:Diisononyl Phthalate ( DINP) Molecular Formula: C26H42O4 Appearance : transparent oily liquid Specification: Total ester % ----------------------------99.0MIN Color( Pt-Co) -----------------------------40 MAX Density (20)g/cm3-----------------------0.973-0.977 Flash point (open-cup)℃----------------219MIN Moisture % ------------------------------0.2MAX Use: DINP is main general plasticizer, it can work with PVC and do not be precipitated in large dosage, it has better properties, it is better than DOP in volatile, moving capacity and toxicity. It has been widely used in toy membrane, wire and cable. Packing: in 200kg iron Drums

The principle of production: The No Needle Electroporation Beauty Equipment utilize the electrical stimulus to open the cortex. Then under the technologies of hydropower perforation and electrodialysis, pass the active elements through follicles, sweat gland and passages between cells, so as to penetrate the hypodermic tissues deep into the mesoblast . It can open the entrance (break the cell wall) easily through stimulating the aquaporin in the cells membrane and penetrate the membrane, which means it can transport the active elements into the endothecium of the cells membrane without a syringe Advantages 1.Renovate the technology: using the theory of the electronic perforation and penetration 2.High efficiency of absorbing: the nutrition go into the cells directly. So the absorptivity is high. 3.Without pains, no side effects: During the whole process, you can't feel any pain. It doesn't change the mechanism of the skin. It is possible to match with nature active products. 4. Used part: applicable to face, cervix, bosom, waist, buttocks and legs, improve the effects of complimentary products, whitening skin, wiping off wrinkles and losing weight. A beautiful figure of you can be realized by the high-tech ,without any side-effect after operation Frequency: 2.2KHz for deep skin 4.5KHz for middle layer 6.0 KHz for surface layer Intensity regulation: 1-30 Infusion spped:1-10 seconds(5S, means infuse every seconds)

Ultrsasonic cavitation Function: The equipment takes the strong ultrasonic heads to release 40,000Hz powerful ultrasonic, speedy vibrates fatness cells, produces countless vacuum air pocket in and out of cells, mightily impacts the fatty cells, makes the cell membrane produce the inner cracking, so as to dissolve the triglyceride to be the glycerin and free fatty acid, gets the body slimming and beauty effects. 1. Mightily cracking the cellulite, remove the fatness. 2. Dissolve the fatness, do lymph drainage, skin tightening, enhance skin elasticity. 3. Improve the orange tissues, slim and sculpture the body contour. Supersonic Function: Supersonic has a mechanical, hyperthermia and biochemical effect, make local tissue cells can be micro-massaged, promote blood circulation, soften organizations, speed up chemical reactions, and promote metabolism. It can promote blood circulation and lymph circulation, thus has the effect of detoxification, wrinkle removal, tightening, lifting, lightening flecks and eliminating pouch and dark circles. Specification: Voltage: AC110~220V, 50/60Hz Power: ≤75W Operating frequency: 1MHz/40KHz MEAS. Of Package: 47.5CM*38.5CM*41.5CM (carton) GW:10KG NW:7.5KG

WORK THEORY: The equipment takes the strong ultrasonic heads to release 40,000Hz powerful ultrasonic, speedy vibrates fatiness cells, produces countless vacuum air pocket in and out of cells, mightily impacts the fatty cells, makes the cell membrane produce the inner cracking, so as to dissolve the triglyceride to be the glycirin and free fatty acid, gets the body slimming and beauty effects. Function and therapeutic theory: 1. Mightily cracking the cellulite, remove the fatness. It uses the strong ultrasonic head to shoot 40,000Hz ultrasonic, after entering the body, will make the fatty cells produce mighty cracking effect and fatty cells friction, effectively exhaust the heat energy, exhaust cells water, let fatty cells shrinking. Moreover, when the ultrasonic vibrates, there will bring mighty impaction among cells, fatty cells will be less, so get effect of fatness removal. 2. Dissolve the fatness, do lymph drainage, skin tightening, enhance skin elasticity. 3. Improve the orange tissues, slim and sculpture the body contour. Through the electrode energy of the equipment, it produces biology waves to stimulate the body relevant points. With different frequencies and pulses, under many physics electron reciprocity, stimulate the fatness, let the body exercise, so exhaust the heat energy and fatness again, get the effect of sculpturing the body. Technical advantages: 1. Adopt the top ultrasonic liposuction technique in the world. 2. Suitable for all kinds of skin. 3. Comfortable, painless, woundless during the treatemnt. 4. Easy operation, easy study. 5. Non- exhaustion, low cost investment and quick high returns.. Features: 1. Free operation, non-anaesthetic. 2. No ruggedness. 3. No bleeding, tumidness and bruise. 4. No side effects, good effects, no rebounding phenomenon. 5. Woundless, will not influence the nomal working and living. Specifiction Voltage: 110/220V Power:110W Package: 58.5CM*51CM*145.5CM Frequency: M80 40KHz, M50 50KHz

Work theory: The equipment takes the strong ultrasonic heads to release 40,000Hz powerful ultrasonic, speedy vibrates fatiness cells, produces countless vacuum air pocket in and out of cells, mightily impacts the fatty cells, makes the cell membrane produce the inner cracking, so as to dissolve the triglyceride to be the glycirin and free fatty acid, the under the power of RF wave with 5MHz,to exhaust them out through the liver sausage circulation, at last, uses the dynamical red photon and the oriented electrode to do skin tightening, gets the body slimming and beauty effects. The 10 pcs electrodes have the vibration, electrostimulation and LED function which have the function of liposuction. Funtions: 1. Mightily cracking the cellulite, remove the fatness. It uses the strong ultrasonic head to shoot 40,000Hz ultrasonic, after entering the body, will make the fatty cells produce mighty cracking effect and fatty cells friction, effectively exhaust the heat energy, exhaust cells water, let fatty cells shrinking. Moreover, when the ultrasonic vibrates, there will bring mighty impaction among cells, fatty cells will be less, so get effect of fatness removal. 2. Dissolve the fatness, do lymph drainage, skin tightening, enhance skin elasticity. It takes the most advanced RF technique and energy, directly penetrate into deep-seated cellulite. With targeted oriented RF output, it makes the fatty cells in quick active state, produces heat friction, higher the partial temperature. Through the sweat gland, liver sausage circulation and lymph, exhaust the redundant fatness and toxins out of the body, so get the effect of cellulite dissolving. 3. Improve the orange tissues, slim and sculpture the body contour. Through the electrode energy of the equipment, it produces biology waves to stimulate the body relevant points. With different frequencies and pulses, under many physics electron reciprocity, stimulate the fatness, let the body exercise, so exhaust the heat energy and fatness again, get the effect of sculpturing the body. Technical advantages: 1. Adopt the top ultrasonic liposuction technique in the world. 2. Suitable for all kinds of skin. 3. Comfortable, painless, woundless during the treatemnt. 4. Easy operation, easy study. 5. Non- exhaustion, low cost investment and quick high returns.. Features: 1. Free operation, non-anaesthetic. 2. No ruggedness. 3. No bleeding, tumidness and bruise. 4. No side effects, good effects, no rebounding phenomenon. 5. Woundless, will not influence the nomal working and living. Specification: Voltage: 110/220V Power:110W Package: 56cm*52cm*102cm Frequency: M80 head(40KHz), RF head(5MHz)

Description: In 2008, the world's leading Italy RG splitting fat system is a non-invasive New technology, using micro-air technology and overclocking strong sound wave as the common principles for blasting internal fat granules , and immediately break away excess fat, one therapy of fat blast equivalent to taking out 120 CC fat from your body, with their willingness to form sculpture. For example,Waist, abdomen, legs, back, face, and so on, by which you can lose your weight in your our hands, not only about the place of your body, but also about the exact weight what you want losed.At the same time, tightening the skin of amorphous, you will get the hot star-level body by Italy RG liposuction system. The process of RG9 liposuction: 1.Micro-air pressure produce mighty pressing, The liquid of the fat is broken down with a large number of micro-cells; 2.Micro-cells continue to impact fat granules will be produce negative presssure ; 3.Overclocking strong sound waves are generated pressure on the outer membrane of fat cells ; 4.Adipocyte immediately burst when Internal and external pressure to the limit ; 5.The fat break down and emulsifying fatty acids and glycerin ,which will be discharged out of body by lymphatic system when it penetrate the cell membrane. Functions and effectiveness: Beyond and replace liposuction surgery; To tighten the slack skin; Enhance the body's metabolic rate, speeding up eliminating the waste and moisture of the body Recover pregnancy wrinkles ; To relax the muscles, relieve the muscle spasms, alleviate muscle pain; Body weight loss, rapid elimination of fat and shaping waist, abdomen, and also shaping the hip and legs ; Strong sound explosion +orientation splitting fat + energy balance -in-1 Principle process: Powerful sound waves burst fat , frequency can adjust according to your real requirements; For the Department of hip, as well as abdominal fat accumulation, fat dissolved, shaping the local body and slim; The elimination of cellular organization; sculpture flexible skin; Partial body size sculpture; To strengthen the muscles tighten, rapid slimming body, size reduction; Lymphatic drainage, soften and break down fat , conducive to the emission of toxins in the body; Parameter∶ Voltage: AC110V/AC220V; Power: ≤ 150W Spec.: 61CM * 55CM * 152CM NW.: 30KG; GW.: 55KG Infrared wavelength: 460-550nm Frequency: 1khz Magnetic resonance and infrared therapeutic head M50 working head with Frequency: 1MHz Power: 0.5W/CM2~5W/CM2 M80 working head with Frequency: 40kHz Power: 5W/CM2~25W/CM2 4X working head with frequency: 1MHz Power: 0.5W/CM2~5W/CM2

I APPLICATIONS∶ The machine is suitable for the dual bag packing of small grain-like materials, such as tea leafs, medicinal tea and healthy teas. II FEATURES AUTOMATIC TEA-BAG PACKING MACHINE WITH THREAD，TAG AND ENVELOPE is a hot-sealed, automatic and multifunction packing equipment, The main characteristic of this equipment is it can molding in one time to protect the material from the direct contact with workers’ hands and improve the efficiency. The inner bag is filter paper, tagging with thread and label automatically is available. The outer bag is composite paper (including various kinds of composite membrane hot sealable such as paper/plastic, plastic/plastic, plastic/aluminum/plastic, paper/aluminum/plastic.) The most advantage is, the capacity, the inner bag and outer bag can be adjuster flexibly, and the size of the inner and outer bag also can be adjuster according to the requirement of the customer to get the perfect effect. III TECHNICAL DATA∶ MODEL BT-18I BT-18II FEATURES The inner bag without thread and tag The inner bag with thread and tag automatically FILLING RANGE 3-15（ml） 3-15（ml） CAPACITY 40-70（bag/min） 30-60（bag/min） INTER BAG SIZE W∶50-80（mm） L∶50-70（mm） W∶50-80（mm） L∶50-70 （mm） OUTER BAG SIZE W∶70-90（mm） L∶80-120（mm） W∶70-90（mm） L∶80-120（mm） TAG SIZE W∶40-55（mm） L∶20-40（mm） THREAD LENGTH 155（mm） POWER 220V/50HZ 220V/50HZ TOTAL POWER 3.5KW 3.5KW DIMENSION （L*W*H）1000*950*2000（mm) （L*W*H）900*610*1500（mm） WEIGHT 500KG 500KG