This machine is used to grind hard material and soft them in 60 to 300 mesh.Application: Guar split, tamarind seed, caria core, coal, chinaclay gypsum, CMC, etc. Model Available in vertical and horizontal types. Featured with long working life and easy to operate, it is good for powder mixing and extraction the material.

Capability Feature∶ （1）The roll is produced by centrifugal compound casting technology, which has high hardness, good abrasion resistance and long working life. （2）Surface of the roll is made of alloy material (Ni Cr Mo), thickness is 25-35mm, working life is long. （3）The inner part of the roll is made of ductile iron, which has high tensile strength and bending strength. Broken roll never happens. （4）The structure is double nut and one guide screw, which can accurately adjust the distance between the rolls. （5）Low energy consumption and high output. The cracker can produce 20-25 meshes powder 15 tons/24 hours.

Capability Feature∶ （1）The roll is produced by centrifugal compound casting technology, which has high hardness, good abrasion resistance and long working life. （2）Surface of the roll is made of alloy material (Ni Cr Mo), thickness is 25-35mm, working life is long. （3）The inner part of the roll is made of ductile iron, which has high tensile strength and bending strength. Broken roll never happens. （4）The structure is double nut and one guide screw, which can accurately adjust the distance between the rolls. （5）Low energy consumption and high output. The cracker can produce 20-25 meshes powder 15 tons/24 hours.

（1）The roll is produced by centrifugal compound casting technology, which has high hardness, good abrasion resistance and long working life. （2）Surface of the roll is made of alloy material (Ni Cr Mo), thickness is 25-35mm, working life is long. （3）The inner part of the roll is made of ductile iron, which has high tensile strength and bending strength. Broken roll never happens. （4）The structure is double nut and one guide screw, which can accurately adjust the distance between the rolls. （5）Low energy consumption and high output. The cracker can produce 20-25 meshes powder 15 tons/24 hours.

Main technique target of Air separation plant Products Capacity(m3/hr)Purity(%) Pressure(Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8% 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment ofAir separation plant 1. Air compressor 2. Air tank 3. Precision filter 4. Pre-cooler 5. Water separator 6. Purifier 7. Heater of Purifier 8. Rectification column 9. Heater of the rectification column 10.Expansion Turbine 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air separation plant * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of GB8982-1998<medical oxygen> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security _ The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Summary ∶ Technical specifications Type Y26 Weight 26 (Kg) Length 650 (mm) Cylinder dia φ65 (mm) Piston stroke 70 (mm) Working pressure 0.4 (Mpa) Impact energy ≥30 (J) Impact frequency ≥23 (Hz) Air consumption ≤47 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type YT24 Weight 24 (Kg) Length 678 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥31 (Hz) Air consumption ≤66.7 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108(mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:58 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type Y24 Weight 24 (Kg) Length 604 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥27 (Hz) Air consumption ≤55 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Ceramic (Ferrite) magnets are composed of strontium carbonate and iron oxide. They are charcoal gray in color and usually we saw different sharp of ceramic(ferrite) magnets:discs ferrite magnets, rings ferrite magnets, blocks ceramic magnets, cylinders ferrite magnets, and sometimes arcs ferrite magnets for motors. Ceramic (Ferrite) magnets are chemical compounds consisting of ceramic materials with iron(III) oxide (Fe2O3) as their principal component. Many of them are magnetic materials and they are used to make permanent magnets, ferrite cores for transformers, and in various other applications.Ferrites are, like most other ceramics, hard and brittle. In terms of the magnetic properties, ferrites are often classified as "soft Ceramic (Ferrite) magnets" and "hard Ceramic (Ferrite) magnets" which refers to their low or high coercivity of their magnetism, respectively. If you have the requirement of Ceramic(Ferrite)magnets, Pls contact us feel free, and we'll provide you detail docs and resonable price!

Description: The magnetic lifters have the features of strong attraction, smaller volume , lighter weight, powerful lifting effort , easy and safe to operate, long-period effort and without power supply. Magnetic lifters are been used to lift and transport the steel and iron for factories, docks, ware houses, transportation etc. The magnetic lifters can hoist iron, steel blocks, cylinder and others and provide a quick and convenient method of loading, unloading,and moving. Features: 1. On and off of the magnetic path is controlled by turning the manual handle 2. Use to lift, transport steel and iron for factories, docks, warehouses, transportation and more. 3. Turning the manual handle activates or turns off the magnet. 4. Strong attraction gives this tool a powerful lifting ability while it’s small size and light weight makes it easy and safe to operate. Effective for long periods with no need for a power supply.

we have 1\2\3\4\5\6 ton mini truck 《《cimcyuanling@gmail.com》》 1、Emission∶Euro 1/Euro 2/Euro 3.diesel. 2、load capacity∶0-2.5T，3T，4T，5T，6T 3、truck's chassis made by ourselves 4、optional color and configuration Model ZTP1052W Type Single Cab cargo truck Driving type LHD/RHD Overall dimension (mm) Length 5960 Width 2080 Height 2200 Wheelbase (mm) 3308 Tread (mm) 1680 (front), 1485 (rear) Ground clearance (mm) 185 Cargo deck (inside) (mm) Length 4180 Width 1980 Height 390 Curb vehicle weight (kg) 2505 Gross vehicle weight (kg) 6200 Payload (kg) 3500 ENGINE Model YZ4105QF CY4102BZQ CY4100ZLQ 4100QBZL YCD4B32-116 CY4102BZLQ YCD4C32-126 SOFIM8140.43S Type Diesel, 4-cylinder, in line, water □ cooled, direct injection Diesel, 4-cylinder, in line, water □ cooled, direct injection,turbocharged Diesel, 4-cylinder, in line, water □ cooled, direct injection, turbocharged, intercooler Bore & stroke (mm) 105X118 102X118 100X118 100X105 95X105 102X118 100X120 94.4X100 Displacement (cc) 4087 3856 3707 3298 2977 3856 3770 2798 Max. power (kw/rpm) 75/3200 88/2800 81/2900 81/3200 85/3200 88/2800 93/2800 90/3600 Max. torque (N.m/rpm) 260/2200 324/1800 320/1500 285/2000-2200 325/2100 343/2200 355/1800 285/1800 Emission Euro Ⅰ Euro Ⅰ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅲ Fuel tank capacity (L) 80 Model LC5T97 LC5T30 LC5T35 IVECO 2826.5 Speed 5 Gear ratio 「 1 □ 5 (6) R」 5.788,2.988,1.735,1.000,0.818,5.086 4.776,2.469,1.479,1.000,0.778,4.774 4.936,2.561,1.518,1.000,0.783,4.816 6.195,3.895 , 2.260,1.430,1.000 , 5.690 Front “ I ” type beam axle Rear Double curve cone of gear, single-stage deceleration, pipa type Brake system Service brake Duel circuit hydraulic brake Parking brake Style of central drum

Main technique target of Air Separation Plant-Oxygen plant-Nitrogen Plant: Products Capacity (m3/hr) Purity (%) Pressure (Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment of Air Separation Plant-Oxygen plant-Nitrogen Plant: 1.Air compressor 2. Air tank 3.Precision filter 4.Air pre-cooling system 5.Water separator 6.Molecular sieve purification system 7.Heater or molecular sieve purification system 8.Rectification column 9.Heater or the rectification column 10.Gas bearing turbo-expander 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air Separation Plant-Oxygen plant-Nitrogen Plant: * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of <GB8982-1998> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security:The outside compression process is oxygen be compressed atroom temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability: liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Application: ZYD Double-stage transformer oil recycling machine can quickly remove water, trace water, gas, particles quickly from oil to improve oil’s dielectric strength, effectively making sure electric equipments working safely and normally. ZYD oil recycling is particularly suitable for treating high-grade transformer oil, super-voltage transformer oil and new transformer oil. It can be used for filtration of more than 110V substation live line work onsite. Features: 1. ZYD have two vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly. 2. Combined with unique and advanced dewatering, degassing components can rapidly and effectively separate water, gas from oil. 3. Three stages precision filtration system, mesh filtration combined with molecular adsorption technologies. 4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 5. Adopt double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 6. Interlocked protective system, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 7. ZYD is live line work onsite. Contact: Rainna Email/ MSN: oilrecyclingh@hotmail.com Yahoo: oilpurifierrainna@yahoo.com Skype: oilpurifiernk Google Talk: rainnaoilpurifier@gmail.com Fax: +86 23 68089506 Mobile: +8615683907367 Website: http://www.nkoilrecycling.com/ http://www.tradett.com/companies/u970196 http://www.allproducts.com/manufacture96/oilrecyclingh http://oilrecyclingh.en.china.cn http://oilrecyclingh.en.ec21.com http://oilrecyclingh.diytrade.com http://www.tradevv.com/chinasuppliers/oilrecyclingh http://www.ecvv.com/company/oilrecyclingh/index.html http://www.worldoftrade.com/mem_home/32033426800/chongqing-nakin-oil-recycling-co-ltd-.htm http://oilrecyclingh.sugoo.com/ http://oilrecyclingh.bossgoo.com/ http://c615888.tootoo.com/ http://www.ec51.com/oilrecyclingh/ If you are interested in our oil purifier machines, please do not hesitate to contact us, we will provide you the complete technical support.

Application: ZY Single stage transformer oil recycling plant is a efficiency vacuum insulating oil recycling system. It can remove water; trace water, gas, particles from oil quickly, improving oil dielectric strength. Mainly for the power station, industrial and mining enterprises purifying the unqualified transformer oil, mutual inductor oil, switch oil and so on. Also, this oil purifier can be used to power equipments to vacuum drying, and vacuum oiling. Features: 1. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 2. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 3. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 4. Working with BZ insulating oil regeneration device to decolor (remove acid, oxide, free carbon) and lower dielectric loss, making the treated oil more limpidity. Contact: Rainna Email/ MSN: oilrecyclingh@hotmail.com Yahoo: oilpurifierrainna@yahoo.com Skype: oilpurifiernk Google Talk: rainnaoilpurifier@gmail.com Fax: +86 23 68089506 Mobile: +8615683907367 Website: http://www.nkoilrecycling.com/ http://www.tradett.com/companies/u970196 http://www.allproducts.com/manufacture96/oilrecyclingh http://oilrecyclingh.en.china.cn http://oilrecyclingh.en.ec21.com http://oilrecyclingh.diytrade.com http://www.tradevv.com/chinasuppliers/oilrecyclingh http://www.ecvv.com/company/oilrecyclingh/index.html http://www.worldoftrade.com/mem_home/32033426800/chongqing-nakin-oil-recycling-co-ltd-.htm http://oilrecyclingh.sugoo.com/ http://oilrecyclingh.bossgoo.com/ http://c615888.tootoo.com/ http://www.ec51.com/oilrecyclingh/ If you are interested in our oil purifier machines, please do not hesitate to contact us, we will provide you the complete technical support.

specification material:Steel cover+wire mesh body dimension:small:6x22cm&big:6x33cm use for:feed birds packing:12pcs/CTN Measurement:38x24x23cm&38x24x34cm G.W:2.4KG&3.0KG MOQ/20GP QTY:1330CTN&1220CTN

specification material:plastic cover+wire mesh body Dimension:6x35cm use for:feed birds packing:12pcs/CTN measurement:40x23x28cm G.W:2.4kg MOQ/20GP QTY:1080CTN

specification material:plastic cover+wire mesh body Dimension:6x23cm use for:feed birds packing:12pcs/CTN measurement:27x24x25cm G.W:1.5KG MOQ/20GP QTY:1720CTN

specification material:plastic cover+wire mesh body dimension:6x18cm use for:feed birds packing:12pcs/CTN measurement:27x24x20cm G.W:1.4kg MOQ/20GP QTY:2160CTN

specification material:plastic cover+wire mesh body dimension:6x18cm use for:feed birds packing:12pcs/CTN measurement:27x24x20cm G.W:1.4kg MOQ/20GP QTY:2160CTN

Semi-automatic liquid filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Principles and characteristics of A, DY series of semi-automatic piston filler filling machine. Drive a piston through the cylinder to extract and play materials, using one-way valve controls the flow of materials and in magnetic reed switch control cylinder line Process, you can adjust the amount of filling. B, machine design is reasonable, model compact, convenient operation, pneumatic part of Germany FESTO and Taiwan are used AirTac pneumatic components. C, material contact parts are used 316L stainless steel material, meet the GMP requirements. D, filling volume and filling speed can be arbitrarily adjusted, filling and high accuracy. E, filling and lifting, focusing instead on use of anti-drip filling device Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

semi-automatic quantitative filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Main purpose of the filler can be used in lubricating oil, cooking oil and other oil filling. Specifications Filling speed 200-350bottles/hour Accuracy ± ≤ 0.5% FS Power Supply 220/380V Air Pressure 0.5-0.7Mpa Filling head 2 Principle features of digital display Two-speed control technology linear filling filling filling valve anti-drip stainless steel A, the model filling machine design is reasonable, model compact, easy to operate the piston and the cylinder cylinder are made of PTFE and stainless steel materials, filling volume and filling speed can be arbitrarily adjusted, filling high precision; B, filling, focusing instead on use of anti-drip, anti-filling drawing and lifting devices, can be applied to in the lubricating oil, edible oil and other oil filling. Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

Automatic Liquid Filling Machine Filling Machine Product Description; xunjie11dtjyOur company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Main use The filling machine widely used in daily chemical, food, grease and other industries, may be filling different liquid products. Specifications Filling speed 60-100 bottles / min Filling accuracy ≤± 1% Current 3A Power 220/110V 50/60Hz Power 500W Air pressure 0.4-0.6MPa Optional Model 5-60ml 10-125ml 25-250ml 50-500ml 100-1000ml 250-2500ml 500-5000ml Principle Features A, RG6T-6G filling machine in reference to similar products on the basis of improved design and added some additional functionality. B, so that the use of the product operation, accuracy error, installed capacity adjustment, equipment cleaning, maintenance, etc. is more easy and convenient. C, compact machine design is reasonable, simple and beautiful appearance, filling volume adjustment easily. D, there are six filling machine head, driven by six cylinder, filling materials more quickly and accurately. E, using German FESTO, Taiwan AirTac pneumatic components and Taiwan's electrical control parts, and stable performance. F, material contact parts are used 316L stainless steel materials. G, filling machine with South Korea-ray eyes, Taiwan's PLC touch screen, inverter and the French electrical components. H, regulating facilities, no bottle no filling, filling the amount of accurate and has a count function. I, with anti-drip and drawing, focusing instead on the filling, anti-foam products, filling high-lift system to ensure that bottle positioning positioning system and liquid level control system Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.comWebsite: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

specification material:steel cover+wire mesh body dimension:7.5x26cm use for:feed birds packing:12pcs/CTN measurement:33x27x25cm G.W:1.5kg MOQ/20GP QTY:1250CTN

Razor Barbed Wire Fence barbed wire mesh -------------------------------------------------------------------------------- Razor barbed wire fencing and razor wire concertina makes the majority of our products. Razor barbed wire fencing is usually made of galvanized steel blade or stainless steel blade. Two pieces of stainless steel razor wire or zinc-coated razor wire can be bounded together by clips to make it stronger. The spiral intersecting barbed wire presents an intersecting shape after opening with beautiful outlook and practical property Material for Razor Barbed Wire Fencing: Galvanized blade, stainless steel blade. Features: Compact and rational structure, high safety factor, for the protection of prison and key project . Technical Note: Razor barbed wire fencing can be made according to the actual dimension of customer; the special specification is manufactured according to the drawing Notes: Standard products are shown in the tables above, special specifications available on request. Standard materials are either galvanized or stainless steel.

Wire mesh fence Curvy Welded Fence Temporary Fence -------------------------------------------------------------------------------- We can produce and provide various safety mesh fences. Our mesh fence products enjoy such properties as corrosion resistance, aging resistance, sunshine resistance and weather resistance. Forms of corrosion resistance include electric galvanizing, hot-dip galvanizing, PVC spraying and PVC coating we have developed a new type of safety mesh fences that are sold well abroad Detail as follows: Specifications (H x W): 800, 1,000, 1,200, 1,500, 1,600, 1,800, 2,000 x 3,000mm; double layers 2,400, 2,600 x 2,800 x 3,000 x 3,000mm Corner Post: 48 x 2.5 Wire Guage: 3mm, 4mm. 5mm, 5mm 4.5mm The Aperture Size: 50 x 140mm, 50 x 200mm, 75 x 250mm ODM/OEM orders welcome Available in a range of sizes, colors Build to your specifications as well Specifications can be customized.

Crimped Wire Mesh Vibrating Screen Crimped Wire Mesh is made by corbon iron wire, galvanized steel wire or stainless steel wire.high carbon steel #70,45#: Q235,Q195. Weaving Patterns: Weaving after crimping General Use: Screening in mine, coal factory, construction and other industries. Some galvanized crimped wire mesh and stainless steel crimped wire mesh are for roasting of flour food and meat. Packaging Detail: as cleints'requirment,standard packege: 10 peices/bundle,20pieces/bundle, bundled with steel strip . To fit with International Standard ISO9044-1990 and national standard GB/T5330-85

Hexagonal Wire Mesh gabion mesh gabion baskets Chicken Wire Netting Material: Hot Dip Gal./Electro Gal./Black Iron Wire, PVC coat wire. Features: It has well erosion-resisting and rustproof properties. Applications: extensively used in industrial and agricultural construction, building works, and all such made for the purpose of reinforcing and fencing as protective cage, guards for window and machinery safety isolation, floor screen reinforcement and poultry cage, fishing, garden and children's play-ground . Weaving Types: Straight Twisted, Reversed Twisted.

Stainless Steel Wire Mesh Wire Materials: Type 304, Type 304 L, Type 316 and Type 316 L. Type 304 often refers to as "18-8" (18% chromium, 8% nickel ). T-304 is the basic stainless alloy mostly commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit. Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics. Type 316: Stabilized by the addition of 2% molybdenum, T-316 is an "18-8" alloy. Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulfur-bearing water or halogen salts, such as chlorides are present. Type 316 L: Type 316 L is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.

Chain Link Fence Commercial Fence diamond wire mesh -------------------------------------------------------------------------------- Material: Low carbon steel wire, stainless steel wire, aluminum alloy wire. Weaving: Woven diamond pattern provides strong, durable and flexible construction. The closely spaced diamond mesh construction gives your fence linear strength and springy texture to protect horses from injury and prevent predators from entering paddocks and pastures. Diamond mesh is used as fencing for sports field, river banks, construction and residence, also animal fencing. Low carbon steel diamond mesh has a heavy galvanized coating to ensure a long life. The Diamond Mesh wire construction is: strong; safe and flexible; does not break; does not sag or roll up at the bottom.

Welded Wire Mesh Panels welded wire fence panels We are offers welded wire mesh in galvanized iron, stainless steel or pvc coated wire. Welded mesh products are made of high quality wire through automatic process and sophisticated welding technique. The finished products is level and flat with sturdy structure. Use: Welded wire mesh is used in a number of industries, like construction, petroleum, chemical industry, breeding, garden fencing and foodstuff industry. Assortments available: Welded wire mesh, hot dipped galv. after welding Welded wire mesh, galv. before welding Stainless steel welded wire mesh Pvc-coated welded wire mesh

Hexagonal Wire Mesh gabion mesh gabion baskets Chicken Wire Netting Material: Hot Dip Gal./Electro Gal./Black Iron Wire, PVC coat wire. Features: It has well erosion-resisting and rustproof properties. Applications: extensively used in industrial and agricultural construction, building works, and all such made for the purpose of reinforcing and fencing as protective cage, guards for window and machinery safety isolation, floor screen reinforcement and poultry cage, fishing, garden and children's play-ground . Weaving Types: Straight Twisted, Reversed Twisted.

Chain Link Fence Commercial Fence diamond wire mesh -------------------------------------------------------------------------------- Material: Low carbon steel wire, stainless steel wire, aluminum alloy wire. Weaving: Woven diamond pattern provides strong, durable and flexible construction. The closely spaced diamond mesh construction gives your fence linear strength and springy texture to protect horses from injury and prevent predators from entering paddocks and pastures. Diamond mesh is used as fencing for sports field, river banks, construction and residence, also animal fencing. Low carbon steel diamond mesh has a heavy galvanized coating to ensure a long life. The Diamond Mesh wire construction is: strong; safe and flexible; does not break; does not sag or roll up at the bottom.

Wire mesh fence Curvy Welded Fence Temporary Fence -------------------------------------------------------------------------------- We can produce and provide various safety mesh fences. Our mesh fence products enjoy such properties as corrosion resistance, aging resistance, sunshine resistance and weather resistance. Forms of corrosion resistance include electric galvanizing, hot-dip galvanizing, PVC spraying and PVC coating we have developed a new type of safety mesh fences that are sold well abroad Detail as follows: Specifications (H x W): 800, 1,000, 1,200, 1,500, 1,600, 1,800, 2,000 x 3,000mm; double layers 2,400, 2,600 x 2,800 x 3,000 x 3,000mm Corner Post: 48 x 2.5 Wire Guage: 3mm, 4mm. 5mm, 5mm 4.5mm The Aperture Size: 50 x 140mm, 50 x 200mm, 75 x 250mm ODM/OEM orders welcome Available in a range of sizes, colors Build to your specifications as well Specifications can be customized.

Euro Fence temporary fence -------------------------------------------------------------------------------- Specification: Electrowelded wire mesh,plastic coated on Galvanized core Green ral6005 powder coating Tensile strength: Line wires:450-550nwt/mm2. Cross wires:600-700nwt/mm2. Material: Low carbon steel wire, PVC coated wire Processing: PVC coated after welding of steel wire. Electro galvanizing, hot-dip galvanizing or PVC coating can be done separately. Application: Euro fence is used as fencing, decoration or protection for various facilities in industry, agriculture, infrastructure, transport, etc. Property: Good corrosion resistance, antiaging, nice appearance, easy and quick installation.

Information: Contact person: Zhang Zhaoxia Adress: Bojin Mansion, Guang'an Street,Shijiazhuang City,Hebei,China. Telephone:86-0311-89180433. Fax:86-0311-89180432 E-mail:info9@china-fivestars.com Company: Anping Five Star Wire Mesh Co.,Ltd. arbed Iron Wire: material:Q195 Q235 wire diameter:1.2-3.2mm barbs space:7.5-15cm Surface: Galvanized ,PVC coated Galvanized Barbed Wire Barbed Iron Wire: Material:electically galvanized wire Wire diameter:1.2-3.2mm Barbs space:7.5-15mm Surface: PVC coated , Galvanized Galvanized barbed wire: 1.Walter produces zinc coated barbed wire in IOWA type, with 2 strands, 4 points. Barbs’ distance is 3-6 inches(tolerance +-1/2” 2.Walter produces PVC barbed wire,colour :green, white, black,etc 3.Galvanized barbed iron wire offered by us is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing