Our company offers Pneumatic Blower for Solids & Powder that are used for the conveying, weighing & batching of dry materials.

KEY PRODUCT THE sleeve of super large scale high alloy centrifugal composite casting roller(CCCR) National ivitiate super large scale multi purpose centrifugal composite casting roller.It can be used to support large scale equipment due tu the virtue of high surface hardness,fine configuration,stabilize performance,evident composite layer,good inner machining function and to replace import products.the technique of hot roller drilling is excellent,all the ends surface are grey cast iron and has the good drillability. TECHNIQUE SUPERIORITY THE centrifugal composite casting thchnique 1. The solidfying is under the action of the centrifugal force,so it has the high density,white iron uniform layer andthere is not any defect of gas hole,sand explosion and residue. 2. The centrifugal casting roller can be inlaid with a sleeve.it can to reduce the consumpsion of raw materil and the weight of the roller. 3. IT is very convenient to drill hole due to the uniform white casing layer. 4. The working surface hardness of the CCCR can be produced acoording to the demand of the users,up to HS726,in general.it has the high anti wear property,good inner ductility and steady quality. 5. The working layer of the roller are uniform and there is a small hardness variation(bellow HS5).the quality steability of the roller is assured. 6. Long working life(more 3-5times working life than the verti cal static casting rollers)can save number of facts for the users. 7. The variety scale rollers can be produced according to demand of the users(the maximum up to Ф1000*8000mm)

1. Technology parameters *variety: 300―1200g/m2 gray paper *degree of drying: 90%above *working linear pressure: 90KN/m *working speed: 450m/min *net paper width: 5700mm *track gauge: 7150mm 2.Performance advantages and characteristics *Finishing,keep the paper surface bright,clean and smooth,at the same time keep the thickness of paper; *Revise the sickness of paper,keep the paper even tightnese *Top roller device:diameter:930X6000 hollow roller;material:high nickel chrome molybdenum alloy,chilled cast iron,centrifugal casting,surface hardness of roller≥HS72° hsrdness difference4~6° , sickness of chilling layer 20―30mm,the sickness of roller 200mm.

Main technique target of Air separation plant Products Capacity(m3/hr)Purity(%) Pressure(Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8% 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment ofAir separation plant 1. Air compressor 2. Air tank 3. Precision filter 4. Pre-cooler 5. Water separator 6. Purifier 7. Heater of Purifier 8. Rectification column 9. Heater of the rectification column 10.Expansion Turbine 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air separation plant * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of GB8982-1998<medical oxygen> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security _ The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

bee pollen royal jelly dry powder bee propolis

Summary ∶ Technical specifications Type Y26 Weight 26 (Kg) Length 650 (mm) Cylinder dia φ65 (mm) Piston stroke 70 (mm) Working pressure 0.4 (Mpa) Impact energy ≥30 (J) Impact frequency ≥23 (Hz) Air consumption ≤47 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type YT24 Weight 24 (Kg) Length 678 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥31 (Hz) Air consumption ≤66.7 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108(mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:58 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type Y24 Weight 24 (Kg) Length 604 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥27 (Hz) Air consumption ≤55 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

The new building material field guide green crusher low carbon much less than grate within the product was from slot machines, extra compared to anticipated gap grate within the obstruct once again from the grate within the effect and by Hammerhead grinding till much less than grate within the crevice was discharged. Hammer Breakers have broken than big nesting uniform particle size, the crush of small, minimal energy usage advantages. However, as Hammerhead put on faster, in tough products broken through the request of restrictions because of grate within the dread of one more plug, it is not advisable to make use of it with crushing humidity as nicely as the clay materials. this sort of breakers are typically applied to broken limestone, shale, coal, gypsum, Cretaceous and so tough from the pursuing brittle materials. Will the hammer crusher for that metal ring hammerhead for that ring machine, could be the hammer crusher variant. It utilizes high-speed and low-speed effect within the detailed part of RCC broken materials, which could be extra cautious services are generally applied for crushing coal for energy plants, but may also be applied for gypsum, salt, and some chemical compounds from the broken tough products . effect Crusher is to make use of the high-speed effect hammer plate as nicely as the plate counterattack rebound, permitting products by repeated shocks and broken machinery. Hammer good plate set up from the high-speed rotation within the rotor, and along the crushing chamber by a variety of completely different angles layout obstruct counterattack plate.alicey998 Hammer products in to the part of area board once the primary hammer through the board the primary time the original shock broken, and entry to power at exactly the same time, in to the high-speed counterattack plate. products and counterattack as shortly as once again broken plate collision, the hammer was bounced back again in to the part of area board, have been completely re-plate hammer blow. So once again and again, till they have been broken into as nicely as the necessary sizing within the discharge. Raymond Mill:http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html High-speed grinding rate was 100-120% within the vital speed, ball ratio is about 35%. Ball much less grinding proficiency is low; ball as well very much in operation once the internal ball is prone to interference, destruction within the usual cycle within the ball, grinding proficiency can also be reduced. Lattice-type ball mill ball charge of 40-45%; Overflow Ball Mill Ball charge of 35-40%. In short, on-site manufacturing ought to be centered ores and item needs to ascertain the ball rates. The above evaluation the fact that ball mill to pick the best ball charge should consider into account the rate within the equipment, we possess a basic answer for the trouble has long been plagued through the vast majority of mill users. The primary solutions of Henan prosperous appliance production: the ball mill, energy-saving ball mill, cement mill, intermittent ball mill, tube mill, grid ball mill, explosion-proof ball mill, disc granulator, pendulum feeding machine, mixing drum, drum sieve large volume sieve, flotation machine, shaker, grading machines, rotary kiln, magnetic separator, dryer as properly as other heavy machinery and equipment, purchase. Dry Equipment:http://www.xingbangmills.com/Mineral_processing_equipment/Dry-Equipment.html Jaw crusher:http://www.china-xingbang.com jaw crusher:http://www.xb-machine.com Jaw Crusher:http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html

Jaw crusher to change the slag processing mode Xingbang mill to improve the lubrication station control system to improve the operating efficiency of the mill of the mineral processing equipment lubrication station control system directly affect the normal operation of the high pressure pump, thus improving the lubrication station control system is very helpful to improve the efficiency of mill operations, Hing The state mill to improve the lubrication station control system to improve operating efficiency.Ball mill lubrication station control system is good or bad a direct impact on the efficiency of the machine, prosperous machine for mill improvements made to the diluted oil station in the Central Plains through the detection pump pressure to control the working status, gas stations equipped with three pressure gauges, for the pump pressure, filter pressure, fuel pressure. Supply pressure from the electric contact pressure gauge testing, the general control of the 0.2 ~ 0.4MPa. When the oil pressure less than 0.2MPa 2 pump oil; stop the oil pressure greater than 0.4MPa 1 oil pump, oil pump oil by 1.As the size of the flow is a direct reflection of the working conditions of the petrol station. Pressure changes can only indirectly reflect the flow changes, the flow does not necessarily increase the pressure increases, the control flow is the most direct and effective. Especially in the winter the temperature changes due to downtime and operation, each time when the start of the wet ball mill should adjust the valve so that the supply pressure 0.2 ~ 0.4MPa, but is also growing with the growth of the running time of lubricating oil temperature, viscosity declining, along with the pressure reduced. Raymond Mill:http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html using the hammer crusher in comparison counterattack Breakers higher compared to broken, and to produce fuller use within the high-speed rotor effect energy. However, as quickly put on plate hammer it tough from the utilization of broken product is restricted, typically applied to difficult broken, broken or minor limestone, coal, lime scale carbide, quartz, dolomite, sulphide metal ore, gypsum and substance raw products from the following, and so tough brittle materials.Typically, the jaw crusher according towards the functioning basic principle of the long-term follow-up questionnaire and buyer information could be summarized: jaw crusher effect the effectiveness within the primary elements from the nip angle as nicely as the crusher jaw crusher rpmNip angle is repaired jaw plate and repaired angle in between the jaw, based on estimates within the angle of as significantly as 32 degrees, and from the genuine style and design is frequently applied in much less than 25 degrees, the fundamental for 18 to twenty degrees simply because the rodents angle is as well large, it will make the ore crushing chamber by which too much force and even out within the collision up and also threatened the private security of personnel or harm to other equipment; and using the nip angle increases, the decline ratio to improve at exactly the same time, efficiency decline. Adjust the sizing of discharge port (port of discharge by adjusting the obstruct sizing could be adjusted), the sizing within the nip angle change. In genuine production, generally centered around the specifications of discharge to adjust the sizing of discharge port size. Therefore, to be sure the fact that specifications of particle size, as much since the port of discharge amplification is reasonable. However, be aware the fact that port of discharge from the regulation of sizing and efficiency broken than to be aware the interaction in between the in the specific range, could be transferred by escalating the quantity of eccentric shafts to improve the manufacturing ability of crusher, however the rate is enhanced at exactly the same time the product will improve the crushing device power consumption. And when the rate is as well large, would have been completely broken from the crushing chamber as well past due to exhaust the ore created jams, but will decrease the manufacturing ability of cement manufacturing equipment. Therefore, the jaw crusher has a variety of revolutions is the most beneficial threshold.Exhibition of Machinery to remind you: Jaw crusher putting on components that include eccentric shaft, connecting rod, movable jaw plate as nicely as the liner and so have to spend interest to lubrication and replacement. Strengthen the jaw crusher broken board lifetime from style and design selection, assembly, make utilization of the procedure advancement elements that include nicely to strengthen the broken jaw broken board lifetime, jaw crusher to enhance manufacturing efficiency, decrease manufacturing expenses .Cement mill upkeep can be an very imperative frequent function , it ought to be match up closely using the appliance operation and upkeep , there ought to be full-time personnel on duty checks.Bearing . Dry Equipment:http://www.xingbangmills.com/Mineral_processing_equipment/Dry-Equipment.html Jaw crusher:http://www.china-xingbang.com jaw crusher:http://www.xb-machine.com Jaw Crusher:http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html

XingBang crushing function effectively ruled out safe hidden trouble in the specific range, could be transferred by escalating the quantity of eccentric shafts to improve the manufacturing ability of crusher, however the rate is enhanced at exactly the same time the product will improve the crushing device power consumption. And when the rate is as well large, would have been completely broken from the crushing chamber as well past due to exhaust the ore created jams, but will decrease the manufacturing ability of cement manufacturing equipment. Therefore, the jaw crusher has a variety of revolutions is the most beneficial threshold.Exhibition of Machinery to remind you: Jaw crusher putting on components that include eccentric shaft, connecting rod, movable jaw plate as nicely as the liner and so have to spend interest to lubrication and replacement. Strengthen the jaw crusher broken board lifetime from style and design selection, assembly, make utilization of the procedure advancement elements that include nicely to strengthen the broken jaw broken board lifetime, alicey998 jaw crusher to enhance manufacturing efficiency, decrease manufacturing expenses .Cement mill upkeep can be an very imperative frequent function , it ought to be match up closely using the appliance operation and upkeep , there ought to be full-time personnel on duty checks.Bearing . Raymond Mill:http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html As we all know, the ball mill bearings of mineral processing equipment in two forms: Rolling and plain bearings. Recent customers buy a ball mill, consider the choice of these two bearings take indefinite final telephone consultation prosperous machine expert, today we have to share prosperous machine to explain the Ball Mill Rolling and plain bearings respective advantages and disadvantages.Comparison of the two bearings, we can start on the structural characteristics of distinction. Rolling bearing is to support depend on the rotation of the rolling body axis of rotation, and thus the contact area is a point, more rolling element contact point nine more and more; plain bearings rely on a smooth surface to support the axis of rotation, and thus the contact area of ??a surface . Plain bearings is the work of the sliding friction bearings. Axis of the bearing part is called a journal bearing journal to match the parts is called. Cast on its inner surface in order to improve the friction properties of the bearing surface and anti-friction material layer is called the bearing liner.In addition, the sliding bearing applications is generally in the low-speed heavy duty conditions, or running parts of the maintenance and filling oil difficulties. Rolling mill by the rolling bearing, replace the bearing structure, and to prevent axial displacement of the anchor to improve the life and saving oil, water, electricity consumption. Overall, the ball mill Rolling convenient maintenance, reliable, good starting performance in medium-speed, high carrying capacity. Compared with sliding bearings, rolling bearings radial size, poor damping capacity, high speed, low life, sound. Dry Equipment:http://www.xingbangmills.com/Mineral_processing_equipment/Dry-Equipment.html Jaw crusher:http://www.china-xingbang.com jaw crusher:http://www.xb-machine.com Jaw Crusher:http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html

Annealed Wire is made of carbon steel wire, used for weaving, baling in general. Applied for home use and the construction. Annealed wire is obtained by means of thermal annealing, endowing it with the properties it needs for its main use - setting. This wire is deployed both in civil construction and in agriculture. Hence, in civil construction annealed wire, also known as "burnt wire" is used for iron setting. In agriculture annealed wire is used for bailing hay. Annealed wire for civil construction: The annealing of bare wire (wire which has simply been drawn) can be carried out in batches (bell-type furnace) or in line (in-line furnace). Annealing is intended to return to the wire its ductility which it had lost during drawing. Annealed wire is stored in coils or spools of a varying weights and dimensions depending on the purposes for which it is intended and the needs of clients. The product does not usually have any type of protective lining, paper or plastic. We offer two kinds of annealed wire, bright annealed and black annealed wire. Black annealed wire gets its name from its plain black color.

U shape Magnet, Bar magnet and Rod magnet U-shape magnet is usually made of Alnico material and painted with red,blue or other paint. Bar magnet and Rod magnet are generally made of FeAlC or Alnico. They are used in physics education labs to show magnetic fields when used with compasses or iron filings & can be used to pickup light metal objects such as paper clips. We can provide good quality,various sizes and colors of magnets according to customers' request.

Ceramic (Ferrite) magnets are composed of strontium carbonate and iron oxide. They are charcoal gray in color and usually we saw different sharp of ceramic(ferrite) magnets:discs ferrite magnets, rings ferrite magnets, blocks ceramic magnets, cylinders ferrite magnets, and sometimes arcs ferrite magnets for motors. Ceramic (Ferrite) magnets are chemical compounds consisting of ceramic materials with iron(III) oxide (Fe2O3) as their principal component. Many of them are magnetic materials and they are used to make permanent magnets, ferrite cores for transformers, and in various other applications.Ferrites are, like most other ceramics, hard and brittle. In terms of the magnetic properties, ferrites are often classified as "soft Ceramic (Ferrite) magnets" and "hard Ceramic (Ferrite) magnets" which refers to their low or high coercivity of their magnetism, respectively. If you have the requirement of Ceramic(Ferrite)magnets, Pls contact us feel free, and we'll provide you detail docs and resonable price!

Description: The magnetic lifters have the features of strong attraction, smaller volume , lighter weight, powerful lifting effort , easy and safe to operate, long-period effort and without power supply. Magnetic lifters are been used to lift and transport the steel and iron for factories, docks, ware houses, transportation etc. The magnetic lifters can hoist iron, steel blocks, cylinder and others and provide a quick and convenient method of loading, unloading,and moving. Features: 1. On and off of the magnetic path is controlled by turning the manual handle 2. Use to lift, transport steel and iron for factories, docks, warehouses, transportation and more. 3. Turning the manual handle activates or turns off the magnet. 4. Strong attraction gives this tool a powerful lifting ability while it’s small size and light weight makes it easy and safe to operate. Effective for long periods with no need for a power supply.

Compound Fertilizer (Welcome to contact sharon dot li at lnfertilizer dot com, MSN is sharon_2010 at live dot cn, Skype:sharoniro) Property: Compound Fertilizer is the fertilizer which contains two or three nutrients of N, P, K. Compound fertilizer is available in powder or granular form. Specification: Active Ingredient N-P-K Appreance 11% 7-0-4 Granular 25% 15-0-10 Granular 10-10-5 Granular 30% 20-0-10 Granular 9-12-9 Granular 15-6-9 Granular 15-5-10 Granular 35% 18-0-17 Granular/Powder 40% 15-10-15 Granular 20-8-12 Granular 14-14-12 Granular 17-6-17 Granular 20-5-15 Granular 20-20-0 Granular/Powder 45% 15-15-15 Granular 15-8-22 Granular 15-20-10 Granular 10-25-10 Granular 42% 14-14-14 Granular 48% 18-6-24 Granular 15-18-15 Granular 16-16-16 Granular 51% 17-17-17 Granular 60% 10-25-25 Granular We can adjust the percentage of N-P-K and trace element (Ca, Mg, Mn, Zn etc) in the Compound Fertilizer according to the customers’ requirements. Usage: Compound Fertilizer is widely used for all kinds of foodstuff crops, such as paddy, wheat, corn, jowar and economic crops, such as tea, cotton, melon, fruit and vegetables. Package and Storage: Knitting bags with plastic liners, 50kg/bag or less than 10kg/bag, or according to customers’ requirement. Stroged in dry, cool airiness place, away from heat avoid insolation. Key Words: Compound Fertilizer, NPK Compound Fertilizer, Compound NPK fertilizer

Potassium Sulfate (Welcome to contact sharon dot li at lnfertilizer dot com, MSN is sharon_2010 at live dot cn, Skype:sharoniro) CAS No.: 7778-80-5 Molecular Formula: K2SO4 Molecular Weight: 174.25 Structural Formula: Property: The anhydrous crystals of Potassium Sulfate form a double six-sided pyramid, but its crystals are in fact classified as rhombic. The Potassium Sulfate crystals are transparent, very hard and have a bitter, salty taste. Potassium Sulfate is soluble in water, but insoluble in solutions of potassium hydroxide and in absolute ethanol. It melts at 1067℃. Specification: Item Specification Appearance White pearl granular Assay ≥99.0% Chloride (Cl) ≤1.0% Water (H2O) ≤0.5% Free acid (as H2SO4) ≤1.0% Usage: Almost all of the potassium in the world is used in fertilizers. As potassium ions are a vital part of plant nutrition, crops and trees must be grown in soil with high concentrations of potassium ions. The principal use of Potassium Sulfate is as a fertilizer. Potassium Sulfate does not contain chloride, which can be harmful to some crops. Potassium Sulfate is preferred for these crops, which include tobacco and some fruits and vegetables. Crops that are less sensitive may still require Potassium Sulfate for optimal growth if the soil accumulates chloride from irrigation water. Package and Storage: Packed by PE bag( 25KG) or as per customer requirement. Store Potassium Sulfate in cool, dry and ventilative places. Keep away from incompatible substance. It can not be stored together with food and feedstuff. Key Words: Potassium Sulfate, K2SO4

Potassium Chloride (Welcome to contact sharon dot li at lnfertilizer dot com, MSN is sharon_2010 at live dot cn, Skype:sharoniro) CAS No.: 7447-40-7 Molecular Formula: KCl Molecular Weight: 74.55 Structural Formula: Property: Potassium Chloride is a chemical compound containing both potassium and chlorine. It is considered a halide salt, which means that it contains a halogen atom and is crystalline in nature like other salts. In its pure state, it is white and odorless. Impure potassium chloride varies in color from white to pink to red. Potassium is one of the three fundamental nutrient elements necessary for plant growth. Potassium containing fertilizers are applied to soils and crops in either the chloride or the sulphate form, depending on the particular crop. Potassium Chloride is most frequently used. Potassium Chloride has a crystalline structure like many other salts. Its structure is face-centered cubic. Its lattice constant is roughly 630 picometers. The density of Potassium Chloride is 1.984. Potassium Chloride Melting and Boiling point is 770 □C and 1420 □C, respectively. Potassium Chloride is easy to soluble in water, 340g/L (20 □C) Specification: Item Specification Potassium Chloride (KCl) ≥96% Potassium (K2O) ≥62% Water (H2O) ≤2% Ca+Mg content ≤0.2% Sodium Chloride (NaCl) ≤1.2% Water insoluble ≤0.1% Sulfate SO4-2 ≤0.5% Usage: Almost all of the potassium in the world is used in fertilizers. As potassium ions are a vital part of plant nutrition, crops and trees must be grown in soil with high concentrations of potassium ions. Since the growth of many plants is limited by their potassium intake, the majority of the Potassium Chloride produced in the world is used for fertilizers. When used as a fertilizer, it is called muriate of potash, which is available in white or red. White potash will dissolve in water, making it useful in liquid starter fertilizers. Package and Storage: Packed by PE bag( 25KG) or as per customer requirement. Store Potassium Chloride in cool, dry and ventilative places. Keep away from incompatible substance. Do not store Potassium Chloride together with food and feedstuff. Key Words: Potassium Chloride, KCl

To avoid crusher damage, downtime and complicated upkeep procedures, the hydraulic overload relief technique opens the crusher when inside forces grow to be as well high, safeguarding the device in opposition to pricey element failure. right after relief, the technique instantly returns the crusher for the prior setting for ongoing crushing. Jaw Crusher functioning Design: A Jaw Crusher is among the principal sorts of major crushers inside of a mine or ore digesting plant. The sizing of the jaw crusher is designated through the rectangular or rectangular opening on the best belonging to the jaws (feed opening). For instance, a 24 x 36 jaw crusher carries a opening of 24' by 36', a 56 x 56 jaw crusher carries a opening of 56' square. major jaw crushers are usually belonging to the rectangular opening design, and secondary jaw crushers are belonging to the rectangular opening design. However, there are various exceptions to this basic rule. Author-anyne367 http://www.xbm-mining.com Ball mill http://www.china-xingbang.com/42.html Sand making machine http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Raymond Mill http://www.xbm-aac.com/Dry-Equipment.html Rotary drier http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html Jaw Crusher

Monoammonium Phosphate (MAP) (Welcome to contact sharon dot li at lnfertilizer dot com, MSN is sharon_2010 at live dot cn, Skype:sharoniro) CAS No.: 7722-76-1 EINECS: 231-764-5 Molecular Formula: NH4H2PO4 Molecular Weight: 115.03 Structural Formula: Properties: MAP is white tetragonal crystals. The density of MAP is 1.803g/cm3. Its melting point is 190□C. MAP is easy to soluble in water, 368 g/L (20□C). Specification: Item Index Excellent First-class Qualified Main Content (NH4H2PO4) ≥99.0% ≥98.0% ≥96.0% Phosphorus Pentaoxide (P2O5) ≥61.1% ≥60.5% ≥59.3% Nitrogen (N) ≥12.0% ≥11.9% ≥11.7% Moisture(H2O) ≤0.4% ≤0.8% ≤4.0% Water Insoluble ≤0.10% 0.20 - pH 4.2～4.7 Usage: MAP is mainly used for the main ingredient of fire retarding agent of wood, forest fire extinguishing agent and dry powder fire extinguishing agent. MAP is also used for dispersant in fiber processing and dye industry, ceramic glaze, ingredient of fireproofing paint, phosphorus nutrition in yeast culture and medicinal ingredient. MAP by wet-process phosphoric acid is mainly used in fertilizer, as the efficient compound fertilizer. MAP has good thermal stability. Heated to 100 ℃, there is only a small number of decomposition. MAP is dewatering and becomes to chain compounds like the sticky Ammonium Pyrophosphate, Ammonium Polyphosphate and Ammonium Metaphosphate at the high temperature. MAP is optimum to use ammonium phosphate during growing time of plant. It’s better than Calcium Superphosphate(SSP) and Ammonium Sulfate in acid soil, superior than other fertilizer in alkaline soil. Package and Storage: MAP is packed in inner polyethylene bag and outer woven bag, with 25kg/bag net weight. Stockpiled at the ventilated place, avoiding rain, moisture and insolation. Please handle with care to prevent the bag from being damaged, stored away from toxic substances. Expiration Date: 730 days. Key Words: Ammonium dihydrogen phosphate, Ammonium phosphate, Ammonium phosphate monobasic, Monoammonium Phosphate, MAP

Urea (Welcome to contact sharon dot li at lnfertilizer dot com, MSN is sharon_2010 at live dot cn, Skype:sharoniro) CAS No.: 57-13-6 Molecular Formula: CH4N2O Molecular Weight: 60.06 Structural Formula: Properties: Urea serves an important role in the metabolism of nitrogen-containing compounds by animals and is the main nitrogen-containing substance in the urine of mammals. Urea is solid, colorless, and odorless (although the ammonia that it gives off in the presence of water, including water vapor in the air, has a strong odor). Urea is highly soluble in water and practically non-toxic (LD50 is 15 g/kg for rat). Dissolved in water, it is neither acidic nor alkaline. The body uses Urea in many processes, the most notable one being nitrogen excretion. Urea is widely used in fertilizers as a convenient source of nitrogen. Urea is also an important raw material for the chemical industry. Specification: Item Prilled Urea Granular Urea Appearance: White free flowing White granular Size: 0.85-2.80mm: 90%min 2.7-4.75mm: 90%min Nitrogen: 46.0% min 46.0% min Moisture: 0.5% max 0.5% max Biuret: 1.0% max 1.0% max Usage: In the past decade Urea has surpassed and nearly replaced ammonium nitrate as a nitrogen fertilizer. Urea is also widely used in the agricultural industry as an animal feed additive. Urea fertilizer can be coated with certain materials, such as sulfur, to reduce the rate at which the nitrogen becomes available to plants. Under certain conditions these slow-release materials result in more efficient use by growing plants. Urea in a slow-release form is popular for use on golf courses, parks, and other special lawn situations. Packing and Storage: 20kg, 25kg, 50Kg PP woven bag with PE inner bag or composite plastic woven bag.1MT (1000kg) or 1.1MT (1100kg) jumbo bag. Shrink-wrapped with pallet is available. Kept in dry and place, avoid moisture, water, rain and fire, normal transportation. Urea is neither combustible nor explosive. It can be stored safely with no loss of quality under normal circumstances. Small or fast-moving augers should not be used to move granular Urea. Urea particles are generally soft and abrasion can break the granules. Belt conveyers should be used whenever possible. Urea should not be stored with ammonium nitrate. These materials, when in contact, rapidly absorb water when the relative humidity is above 18%. Key Words: Urea, Urea fertilizer, Urea 46N

Ammonium Sulphate (Welcome to contact sharon dot li at lnfertilizer dot com, MSN is sharon_2010 at live dot cn, Skype:sharoniro) CAS No.:7783-20-2 Molecular Formula: (NH4)2SO4 Molecular Weight:132.14 Structural Formula: Properties: Ammonium Sulphate has PH value is 5.5 in 0.1M solution. Density 1.769 g/cm3 (20°C). Ammonium Sulphate is hygroscopic; soluble in water; insoluble in acetone, alcohol and ether. Main active ingredients are 21% nitrogen and 24% sulfur, so it can be described as NPK 21-0-0 24S. Generally, it is a by-product from chemical (cyanuric acid, capro, acrylonitrile, sodium cyanide, monosodium glutamate-MSG, methyl methacrylate-MMA, etc.) or steel plant. Steel Grade (also call Coke-ovens Grade) is fine white powder. After processing it can be white granular or flake. Caprolactam Grade is colorless (achromatic) crystalline or yellowish crystals. Specification: Item Standard Steel grade Compacted Granula RANULAR Appearance: White granular White and/or off white and/or or yellor and/or light yellow and/or gray White and/or off white Brick red Some fillers insoluble in water Size: 2-5mm / 1.00-4.75mm:90% 1.00--4.75mm:90% Nitrogen: 20.5% min 20.5% min 20.5% min 17.0% min Moisture: 1.5% max 1.0% max 2.0% max 2.0% max Free Acid: 0.20% max 0.20% max 0.20% max 0.20% max Usage: Agricultural Ammonium Sulphate is one of the most common use and most typical inorganic nitrogen fertilizer. Ammonium Sulphate is the best fast release, quick acting fertilizer, which can be directly used for a variety of soil and crops. It can also be used as kinds of seed fertilizers, base fertilizer and additional fertilizer. It is particularly suitable for the soil which lack of sulfur, low chlorine tolerance crops, sulfur-philic crops. Ammonium Sulphate is very popular in Japan, Southeast Asia, as well as northeast China where plant premium rice. It is suitable for the rice seedling, the growth of tea, grass, vegetables, and fruit trees, effectually rapid promoting the growth of grain, vegetables, fruits, grass and other plants. It has more efficiency than urea, ammonium bicarbonate, ammonium chloride, ammonium nitrate etc. Large granular Ammonium Sulphate can also serve as raw material for compound fertilizer. As feed additives, it provides the nutrients of non-protein nitrogen to ruminants. Ammonium Sulphate also used for fish culture in some areas. Attention: 1 Try not to use Ammonium Sulphate in paddy fields. 2 Ammonium sulphate are acidic fertilizers. It can increase the acidity of the soil, Therefore should pay attention to use in acidic soils with alkaline fertilizer, such as plant ash, phosphate rock powder or calcium magnesium phosphate and so on. Use in neutral and alkaline soil in order to prevent calcium ion combined with sulfate ion to insoluble calcium sulfate (gypsum), caused by soil hardened, and should apply with organic fertilizer. Industrial In chemical industry, Ammonium Sulphate as the raw materials of hydrogen peroxide, ammonium alum and ammonium chloride; and the minor ingredient of ammonium persulfate, lysine. In welding industry, Ammonium Sulphate as a welding agent. In textile industry, Ammonium Sulphate as a flame retardant. In electroplating industry, Ammonium Sulphate as a plating bath additive. In dyeing industry, Ammonium Sulphate as a dyeing auxiliaries of acid dyes. In leather industry, Ammonium Sulphate as a deliming agent. In food industry, Ammonium Sulphate as a dough conditioning agent (fermentation medium), and a catalyst of sauce food. In pharmaceutical industry, Ammonium Sulphate as a salting-out agent can purifying proteins by precipitation In pesticide industry, Ammonium Sulphate as an adjuvant agent. Add in water soluble insecticides, herbicides, and fungicides, such as 2,4-D Amine Salt, glyphosate, and glufosinate herbicides. Packing: 20kg, 25kg, 50Kg PP woven bag with PE inner bag or composite plastic woven bag.1MT (1000kg) or 1.1MT (1100kg) jumbo bag. Shrink-wrapped with pallet is available. Kept in dry and place, avoid moisture, water, rain and fire, normal transportation. In the transportation and outdoor storage, Ammonium Sulphate should be kept away from moisture, insolation, rain & high temperature. Should storage in flatness ground within a ventilating low-temperature dry warehouse. In order to prevent deterioration, strictly prohibit store nearby alkaline substances, such as lime, cement and plant ash. The stacking height should be less than 7 meters. Key Words: Ammonium Sulphate；Ammonium Sulphate Granular

when the movable jaw down, the elbow angle among plate and transferring jaw smaller, movable jaw plate while in the bar, spring below the influence, leaving the repaired jaw plate, this time has been broken below the mouth of products discharged in the crushing chamber. With the continuous rotation engine for periodically broken jaw cellular crushing and waste materials materials, to obtain mass production Jaw Crusher wants being Redesigned deemed The Crushing Environment. The crushing arena is truly a hazardous environment. big substance and debris can jam within the crusher, damaging elements and leading to pricey downtime. Importantly, manually digging out the crusher prior to repairs or restarts puts employees in harmful positions. The Mine security and well being management (MSHA) has reported several injuries and fatalities incurred when climbing in or below the jaw to manually clear, restore or adjust the standard older-style jaw crusher. Author-anyne367 http://www.xbm-mining.com Ball mill http://www.china-xingbang.com/42.html Sand making machine http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Raymond Mill http://www.xbm-aac.com/Dry-Equipment.html Rotary drier http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html Jaw Crusher

we have 1\2\3\4\5\6 ton mini truck 《《cimcyuanling@gmail.com》》 1、Emission∶Euro 1/Euro 2/Euro 3.diesel. 2、load capacity∶0-2.5T，3T，4T，5T，6T 3、truck's chassis made by ourselves 4、optional color and configuration Model ZTP1052W Type Single Cab cargo truck Driving type LHD/RHD Overall dimension (mm) Length 5960 Width 2080 Height 2200 Wheelbase (mm) 3308 Tread (mm) 1680 (front), 1485 (rear) Ground clearance (mm) 185 Cargo deck (inside) (mm) Length 4180 Width 1980 Height 390 Curb vehicle weight (kg) 2505 Gross vehicle weight (kg) 6200 Payload (kg) 3500 ENGINE Model YZ4105QF CY4102BZQ CY4100ZLQ 4100QBZL YCD4B32-116 CY4102BZLQ YCD4C32-126 SOFIM8140.43S Type Diesel, 4-cylinder, in line, water □ cooled, direct injection Diesel, 4-cylinder, in line, water □ cooled, direct injection,turbocharged Diesel, 4-cylinder, in line, water □ cooled, direct injection, turbocharged, intercooler Bore & stroke (mm) 105X118 102X118 100X118 100X105 95X105 102X118 100X120 94.4X100 Displacement (cc) 4087 3856 3707 3298 2977 3856 3770 2798 Max. power (kw/rpm) 75/3200 88/2800 81/2900 81/3200 85/3200 88/2800 93/2800 90/3600 Max. torque (N.m/rpm) 260/2200 324/1800 320/1500 285/2000-2200 325/2100 343/2200 355/1800 285/1800 Emission Euro Ⅰ Euro Ⅰ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅲ Fuel tank capacity (L) 80 Model LC5T97 LC5T30 LC5T35 IVECO 2826.5 Speed 5 Gear ratio 「 1 □ 5 (6) R」 5.788,2.988,1.735,1.000,0.818,5.086 4.776,2.469,1.479,1.000,0.778,4.774 4.936,2.561,1.518,1.000,0.783,4.816 6.195,3.895 , 2.260,1.430,1.000 , 5.690 Front “ I ” type beam axle Rear Double curve cone of gear, single-stage deceleration, pipa type Brake system Service brake Duel circuit hydraulic brake Parking brake Style of central drum

Dry Freight Van Bodies <<cimcyuanling@gmail.com>> 1.Material:FRP Honeycomb-core 2.Light weight, 3.Long lifetime 4.Better Insulation The panels are made of Premade FRP skins and high strength woven roving and hard polyurethane foam which are vacuum bonded together in high pressure. High strength woven roving gives composite panels high impact resistance and flexural strength. Main Characters 1. Much lighter than plywood-cored panels and steel panels. Lighter weight contribute to lighter bodies and increased load capacity. 2. Because FRP honeycomb-core panels use preminum plastic honeycomb as core, the panels have better rigidity which efficiently avoid shaking in riding 3. Quick and easy assembly without special tools. 4. Maintenance is very easy to repair and without trace left. Thickness The common thickness is 20mm 45mm 100mm (with 1mm FRP surface panel) We also make makes by your requirements Please give me your requirements, then I will give you the best service.

Sanjiang super fine spinning water thorn stuck by PET and non-woven PA6 slice the spinning sticky 16 disc made composite hollow orange disc type super long segments fiber, the high-pressure water after sting two components of super thin fiber tightly tangles pressure, and because the high pressure water thorn technology, this kind of hollow orange disc long fiber completely open into the ultra fine long fiber nonwovens. Its unique ahead of the new technology and the world nonwoven science and technology synchronization. Superfine fiber monofilament small diameter, monofilament fineness 0.1-0.05 dtex, is ordinary fiber fineness of a small percentage, bending stiffness small, open the fine rate of more than 70%, feel special soft; Air TouHan sex especially good; Dropping soft, 100% physical prevention and control prevent asthma mite, do not contain any chemical agents, avirulent and harmless, green environmental protection. Widely used in by core pillow core prevent mites bag core cloth, beauty discharge makeup cloth, bath towel bathrobe, clothing lining cloth and sports leisure fabrics, gas liquid filtration, etc. This company product reasonable price, delivery time short, welcome the domestic and foreign trade customers inquire!

Sanjiang super fine water thorn non-woven fabric is by the polyester (PET) and polyamide fiber (PA6) slice two components, after spinning equipment imported stick and stretching spinning spread nets, and then to high pressure water thorn open fine and consolidation method, step into hollow orange disc type legal system super thin fiber spinning sticky water thorn non-woven fabrics. Superfine fiber diameter single small, bending stiffness small, feel special soft, do not damage any surface, no wool; Open fine rate of more than 70%, and the water thorn open fine after separation ultrafine single fiber triangular in shape and used for when wiping can form "wedge" effect, particularly strong decontamination ability; The single fineness 0.1-0.05 dtex, is ordinary fiber fineness of a small percentage, specific surface area increased nearly 10 times, make the products to the dust particles in the adsorption and absorption of water increased greatly and the air permeability and water imbibition is very good, can remove 10 times its own weight, particles of dust, liquid. With regular soap and detergent after cleaning can be repeated use. Do not add any chemical agents, avirulent and harmless, energy conservation and environmental protection. This product absorbed polyester tinggua not wrinkle, polyamide fiber endurable, resilient advantages, the structure of the hollow orange disc makes it with strong hydrophilic, oil absorption, the unique "wedge type" structure so that our products in decontamination ability wins out. Two-component superfine fiber spinning sticky water thorn non-woven fabrics are widely used in: precision instrument, LCD screen, lens, automobile cleanness wipes materials; Industrial wipe materials; Clothing substrate or fabric materials; Household to be core pillow core prevent mites materials; Health materials; Beauty discharge makeup materials; Bath towel bathrobe, wash bath materials; Car interior ceiling materials; Advanced printing wallpaper; Gas liquid filtration material and so on many kinds of fields. Welcome to inquire!

Main technique target of Air Separation Plant-Oxygen plant-Nitrogen Plant: Products Capacity (m3/hr) Purity (%) Pressure (Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment of Air Separation Plant-Oxygen plant-Nitrogen Plant: 1.Air compressor 2. Air tank 3.Precision filter 4.Air pre-cooling system 5.Water separator 6.Molecular sieve purification system 7.Heater or molecular sieve purification system 8.Rectification column 9.Heater or the rectification column 10.Gas bearing turbo-expander 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air Separation Plant-Oxygen plant-Nitrogen Plant: * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of <GB8982-1998> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security:The outside compression process is oxygen be compressed atroom temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability: liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Eco-solvent direct printing ink Our direct eco-solvent ink ensures great performance with a large variety of media, vivid color, low cost, strong adhesion to any kind of media and high speed printing without interruptions. It can fulfill print on many materials directly without coating and the effect is perfect. Our white ink (textiles white ink ; eco-solvent white ink) is perfect for printing black materials. The fluency is good and perfect covering black background. Features: 1. Can be print directly in any material without the help of any coating and realize perfect fastness and gorgeous color 2. Can print out the perfect design in hard, bright and clean materials such as glass, ceramics, etc., but need to use coating to keep good fastness. 3. Perfect fluency performance. The test in the piezoelectric nozzle shows that it can keep the good fluidity none use in one month. 4. In high-speed printing, ink won’t appear broke 5. Print bright color, the color restoration is good 6. can print directly in PVC, acrylic, plastic, leather, metal, ABS, CD/DVD, board, etc. Application: The ink can print directly on all kinds of materials, applicable to metal, wood, VCD, plastic, acrylic, ABS, rubber, PVC, PC, aluminum, stainless steel, stone, silica gel and all kinds of paint surface. Test results: in 48 hours continuous printing ink, won't appear break phenomenon.Using this ink，the service life of piezoelectric nozzle print head is as long as 18 months . Superior fluency,it keeps the fluidity of the record for 15 days no printing work in the in the piezoelectric nozzle This is an advantage of the solvent ink field. The most precious is the ink flowability is very good, Won't appear broken ink when high-speed printing, vivid color and the color reduction is good. Advantages compared with the similar product: 1. fluent superior performance, high speed print won't appear color weak; Because the ink has perfect fluency, reduce the nozzle maintenance time. 2. color restoration is real, color is gorgeous. 3. Print directly on any material, without coating and extra after treatment. Realize perfect fastness. □ Eco-solvent color direct ink-Haiwn-RT6/RT8 It can be used widely for almost all kinds of rigid printing materials such as plastics, acrylic, wood, stone, aluminum, metal, PVC, PC (Polycarbonate), ABS, AS, leather, ceramic and even glass for direct printing without any pre-coating. The good points of the ink are wide printing material applications, vivid color gamut and fast drying time HAIWN-RT6 RT8 Product name: HAIWN-Rt6 Eco-solvent color ink(6 color) product Numbers: HAIWN-RT6 service life: 24 months color: K, C, M, Y, LC, LM suitable model: EPSON STYLUS PHOTO 1290, 1390, R230, R250 & R270 packing: 1000 ml，2000 ml，5000 ml save: Airtight, avoid light, placed in 5-25 degrees Product name: HAIWN-Rt8 Eco-solvent color ink (8 color) a) product Numbers: HAIWN-RT8 b) service life: 24 months c) color: Photo Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta, Light Black, Light Light Black, Gloss d) suitable model: EPSON STYLUS PHOTO R800, R1800, R1900, R4800, R2400, R2880 & PRO 9800 e) packing: 1000 ml，2000 ml，5000 ml f) save: Airtight, avoid light, placed in 5-25 degrees

Haiwn digital printer is a kind of " object non-contact" of ink-jet printing type high-tech digital printing equipment, so it can not be any materials restrictions. Whether simple piece of color design, full color design or have gradient color design, can be printed at one time. No plate making, no sun version and repeat matching color, color bright, the effect is distinct, images waterproof, prevent bask , wear resistance ,good adhesion, do not fade, machine is easy to operate, stable performance, creating higher printing quality than the traditional way, satisfy various industries of high strength of batch production demands and improve your product market competition ability. can print directly crystal glass, stone, wood, metal, acrylic, plastic, rubber, leather, bamboo, shell, ceramic tile, organic glass, KT board, mobile phone, trademark, Name board, lighter, pen, stationery, key, golf, toys, keyboard, the membership card, glasses, packaging, plastic box, etc Digital printer characteristics; 1, you can achieve to print directly on any material, No need for plate making and chromatography 2, you can print directly on the product with the height of 1-100mm even 300mm . 3, easy to operate, just like to print on paper 4, low cost, convenient and quick to act, especially for small-volume samples. 5, can be printed on black, red and other dark-colored backgrounds directly, completely solved the printing problem. 6, using non-contact printing principle, can be achieved to print on the surface of the uneven objects within the 3mm. 7,print color rich, wear-resistant, non-fading, achieve the perfect color gradient. 8, device performance stability, and low maintenance costs. 9, low cost: highest print quality cost 0.9 U.S. dollars per square meters We offer various forms of OEM design and production. Digital direct printers can fulfill to print on many materials directly, like metal, plastic, ABS, PVC, Arcylic , leather, wood，textile，glass，ceramic，DVD & CDs, golf,etc. Digital textile Ink-jet Printer HAIWN- S500 Haiwn textile digital ink-jet printing series products are used for industrial textile production. It combines fast printing speed and elegant design at a suit, and almost the same level of production cost with traditional textile printing, make the digital printing production to become a reality. The whole process without plate-making and pretreatment process, direct print and dry immediately. As high as 5760 * 1440 dpi resolution and 4 color and 8 color printing selection, provides a more lifelike design quality. HAIWN-S500 is very reliable, and is equipped with the garment mould, ensure garment transportation stably; perfect design for ink system and nozzle moisturizing device, ensure continuity of production and spray print quality. It can realize no fade washed by water even without pre-treatment and post treatment. HAIWN-S500 is applicable to all kinds of different thickness of fabric, with professional color separation software to realize printing directly in cotton, hemp, silk, wool, nylon, polyester artificial short fibers and single or blended fabric, etc. Widely used in clothing, footwear, bags, leather products, household textiles, outdoor textiles, car interior, flags and banners. Meet the rapid, changeful, high quality, energy saving, environmental protection market demand. 1. can be printed 450 mm X 300 mm 2. 6 color independent cartridges. Convenient Replacement maintenance （CMYKLCLM or CMYK+ WW） 3. meet such as medium batch and proofing demand 4. satisfy large quantities of industrial demand 5. equipped with professional textile T-shirt printing tools, print more simply Specifications print mode Object Print print size 300x450mm Specifications 640×480×710 mm(W*L*H) Packing size 780×700×520 mm(W*L*H) Net weight 47Kg Gross weight 53kg print speed 100 sec（A4 photo） print height 1-100mm Print weight 8Kg print head cleaning method automatic transmission mode USB2.0 print resolution 5760*1440dpi media clothing, footwear, bags, leather products, household textiles, outdoor textiles, car interior, flags and banners, such as cotton, hemp, silk, wool, nylon, polyester artificial short fibers and other single or blended fabric special ink CMYK + WW or ＣＭＹＫＬＭＬＣ supply ink CISS power AC220V/110V driver WINDOW95/98/2000/NT/XP Operating environment Temperature:10-35degree,Humidity:20-80% packing Anti-pressure carton

Our horse tail hair are from north of china,Mongolia,Siberia. Our worker pick up the hair by hand 1 time to 5 up times. Moreover, we also initiated a new way that the white bow hair was wrapped with paper in order to prevent living bundle prints in the hair.

Digital ink-jet technology with the advanced PLC and single-chip microcomputer embedded system achieves multi-function transmission and prints on objects directly. It can realize to print on PVC, plastic, rubber, metal, ABS, PP, leather, shells and other materials directly. The whole process of print has on plate making, no previous treatment, direct printing, and dry instantly. Realize the product of rapid prototyping printing. Characteristics ・ printing steps rapid and simple: No make plate, plate burning, repeat steps, without the silk-screen printing and thermal transfer mode. One step can shape. ・ ink-jet printing without materials restrictions: Taking the non-contact way to print won't cause materials damage. It can not only print on PVC, plastic, rubber, metal, ABS, PP, leather, shells and other materials, and also can be printed in the hard surface of materials like crystal, stone, metal, glass. ・ printing position accurate: Advanced PLC and single-chip microcomputer embedded control system implement very precise positioning, and avoid the problem of migration caused by manual printing ・ rich color display: Many color ink-jet printing disposable, precise color printing, gorgeous color, digital ink-jet printing equipment can reflect image perfectly. Fully reflect the powerful market potential. ・ Realize the rapid and flexible sample printing: For more industry professional use, it can change the contents of the printings and printing effect. Digital T-shirt Ink-jet Printer HAIWN-T500 Haiwn textile digital ink-jet printing series products are used for industrial textile production. It combines fast printing speed and elegant design at a suit, and almost the same level of production cost with traditional textile printing, make the digital printing production to become a reality. The whole process without plate-making and pretreatment process, direct print and dry immediately. As high as 2880 * 1440 dpi resolution and 4 color and 8 color printing selection, provides a more lifelike design quality. HAIWN-T500 is very reliable, and is equipped with the garment mould, ensure garment transportation stably; perfect design for ink system and nozzle moisturizing device, ensure continuity of production and spray print quality. It can realize no fade washed by water even without pre-treatment and post treatment. HAIWN-T500 is applicable to all kinds of different thickness of fabric, with professional color separation software to realize printing directly in cotton, hemp, silk, wool, nylon, polyester artificial short fibers and single or blended fabric, etc. Widely used in clothing, footwear, bags, leather products, household textiles, outdoor textiles, car interior, flags and banners. Meet the rapid, changeful, high quality, energy saving, environmental protection market demand. 1. can be printed 350 mmX500mm 2. eight color large capacity (110 ml/box) independent cartridges. Convenient Replacement maintenance （CMYK+CMYK or CMYK+WWWW） 3. continuous printing or a continuous interval printing 4. satisfy large quantities of industrial demand 5. equipped with professional textile T-shirt printing tools, print more simply print mode Object Print print size 350X500 Size 950×850×570 mm(W*L*H) Packing size 1000×610×920mm(W*L*H) Net weight 113Kg Gross weight 165kg print speed 65 sec（A4 photo） print height 1-40mm Print weight 12Kg print head cleaning method automatic transmission mode USB2.0 print resolution 2880*1440dpi media clothing, footwear, bags, leather products, household textiles, outdoor textiles, car interior, flags and banners, such as cotton, hemp, silk, wool, nylon, polyester artificial short fibers and other single or blended fabric special ink CMYK+ CMYK or CMYK+ WWWW（110ml/color） supply ink big capacity ink cartridge power AC220V/110V driver WINDOW95/98/2000/NT/XP Operating environment Temperature:10-35degree,Humidity:20-80% packing Wooden case

Haiwn digital printer is a kind of " object non-contact" of ink-jet printing type high-tech digital printing equipment, so it can not be any materials restrictions. Whether simple piece of color design, full color design or have gradient color design, can be printed at one time. No plate making, no sun version and repeat matching color, color bright, the effect is distinct, images waterproof, prevent bask , wear resistance ,good adhesion, do not fade, machine is easy to operate, stable performance, creating higher printing quality than the traditional way, satisfy various industries of high strength of batch production demands and improve your product market competition ability. can print directly crystal glass, stone, wood, metal, acrylic, plastic, rubber, leather, bamboo, shell, ceramic tile, organic glass, KT board, mobile phone, trademark, Name board, lighter, pen, stationery, key, golf, toys, keyboard, the membership card, glasses, packaging, plastic box, etc Digital printer characteristics; 1, you can achieve to print directly on any material, No need for plate making and chromatography 2, you can print directly on the product with the height of 1-100mm even 300mm . 3, easy to operate, just like to print on paper 4, low cost, convenient and quick to act, especially for small-volume samples. 5, can be printed on black, red and other dark-colored backgrounds directly, completely solved the printing problem. 6, using non-contact printing principle, can be achieved to print on the surface of the uneven objects within the 3mm. 7,print color rich, wear-resistant, non-fading, achieve the perfect color gradient. 8, device performance stability, and low maintenance costs. 9, low cost: highest print quality cost 0.9 U.S. dollars per square meters We offer various forms of OEM design and production. Digital direct printers can fulfill to print on many materials directly, like metal, plastic, ABS, PVC, Arcylic , leather, wood，textile，glass，ceramic，DVD & CDs, golf,etc. HAIWN-503 Multi-function digital ink-jet printer 1. can be printed 1250×2500mm 2. 6 color large capacity (100 ml/box) ink cartridge, easy replacement 3. meet such as large batch and proofing demand 4. A4 full color about 20 seconds 5. be printed object 1-100 mm height 6. automatically detect objects height and the height limit 7. online automatic function 8. many objects can be printed at the same time 9. standby energy saving mode 10. Haiwn-503 use Epson fifth generation industry print head nozzle. It is very good to print head. (2) Specifications print mode Object Print print size 1250×2500mm Size 2180×1200×2900mm （W*L*H) Packing size 2210×1500×3200mm (W*L*H) Net weight 280Kg Gross weight 330kg print speed 20 sec（A4 photo） print height 1-100mm Print weight 50Kg print head cleaning method automatic transmission mode USB2.0 print resolution 540×720（4Pass）/1440×720（8Pass）/1440×1440（16Pass） media Crystal glass, stone, wood, metal, acrylic, plastic, rubber, leather, bamboo, shell, ceramic tile, organic glass, KT board, mobile phone, trademark, nameplates, lighter, pen, stationery, key, golf, toys, etc special ink Double 4 color （100ml/color） supply ink big capacity ink cartridge power AC220V/110V 50/60Hz±1Hz driver WINDOW95/98/2000/NT/XP Operating environment Temperature:10-35degree,Humidity:20-80% packing Wooden cases

Haiwn digital printer is a kind of " object non-contact" of ink-jet printing type high-tech digital printing equipment, so it can not be any materials restrictions. Whether simple piece of color design, full color design or have gradient color design, can be printed at one time. No plate making, no sun version and repeat matching color, color bright, the effect is distinct, images waterproof, prevent bask , wear resistance ,good adhesion, do not fade, machine is easy to operate, stable performance, creating higher printing quality than the traditional way, satisfy various industries of high strength of batch production demands and improve your product market competition ability. can print directly crystal glass, stone, wood, metal, acrylic, plastic, rubber, leather, bamboo, shell, ceramic tile, organic glass, KT board, mobile phone, trademark, Name board, lighter, pen, stationery, key, golf, toys, keyboard, the membership card, glasses, packaging, plastic box, etc Digital printer characteristics; 1, you can achieve to print directly on any material, No need for plate making and chromatography 2, you can print directly on the product with the height of 1-100mm even 300mm . 3, easy to operate, just like to print on paper 4, low cost, convenient and quick to act, especially for small-volume samples. 5, can be printed on black, red and other dark-colored backgrounds directly, completely solved the printing problem. 6, using non-contact printing principle, can be achieved to print on the surface of the uneven objects within the 3mm. 7,print color rich, wear-resistant, non-fading, achieve the perfect color gradient. 8, device performance stability, and low maintenance costs. 9, low cost: highest print quality cost 0.9 U.S. dollars per square meters We offer various forms of OEM design and production. Digital direct printers can fulfill to print on many materials directly, like metal, plastic, ABS, PVC, Arcylic , leather, wood，textile，glass，ceramic，DVD & CDs, golf,etc. HAIWN-502 Multi-function digital ink-jet printer 1. can be printed 1250×2000mm (A1+ size) 2. 6 color large capacity (100 ml/box) ink cartridge, easy replacement 3. meet such as large batch and proofing demand 4. A4 full color about 20 seconds 5. be printed object 1-100 mm height 6. automatically detect objects height and the height limit 7. online automatic function 8. many objects can be printed at the same time 9. standby energy saving mode 10. Haiwn-502 use Epson fifth generation industry print head nozzle. It is very good to print head. (2) Specifications print mode Object Print print size 1250×2000mm Size 2180×1200×2400mm （W*L*H) Packing size 2210×1500×2700mm (W*L*H) Net weight 230Kg Gross weight 280kg print speed 20 sec（A4 photo） print height 1-100mm Print weight 50Kg print head cleaning method automatic transmission mode USB2.0 print resolution 540×720（4Pass）/1440×720（8Pass）/1440×1440（16Pass） media Crystal glass, stone, wood, metal, acrylic, plastic, rubber, leather, bamboo, shell, ceramic tile, organic glass, KT board, mobile phone, trademark, nameplates, lighter, pen, stationery, key, golf, toys, etc special ink Double 4 color （100ml/color） supply ink big capacity ink cartridge power AC220V/110V 50/60Hz±1Hz driver WINDOW95/98/2000/NT/XP Operating environment Temperature:5-32degree,Humidity:20-80% packing Wooden cases

Multi-function Digital ink-jet Printer Digital ink-jet technology with the advanced PLC and single-chip microcomputer embedded system achieves multi-function transmission and prints on objects directly. It can realize to print on PVC, plastic, rubber, metal, ABS, PP, leather, shells and other materials directly. The whole process of print has on plate making, no previous treatment, direct printing, and dry instantly. Realize the product of rapid prototyping printing. Characteristics ・ printing steps rapid and simple: No make plate, plate burning, repeat steps, without the silk-screen printing and thermal transfer mode. One step can shape. ・ ink-jet printing without materials restrictions: Taking the non-contact way to print won't cause materials damage. It can not only print on PVC, plastic, rubber, metal, ABS, PP, leather, shells and other materials, and also can be printed in the hard surface of materials like crystal, stone, metal, glass. ・ printing position accurate: Advanced PLC and single-chip microcomputer embedded control system implement very precise positioning, and avoid the problem of migration caused by manual printing ・ rich color display: Many color ink-jet printing disposable, precise color printing, gorgeous color, digital ink-jet printing equipment can reflect image perfectly. Fully reflect the powerful market potential. ・ Realize the rapid and flexible sample printing: For more industry professional use, it can change the contents of the printings and printing effect. HAIWN-501 High Speed digital ink-jet printer 1. can be printed 650mmX1250mm (A1+ size) 2. 6 color large capacity (100 ml/box) ink cartridge, easy replacement 3. meet such as large batch and proofing demand 4. A4 full color about 20 seconds 5. be printed object 1-100 mm height 6. automatically detect objects height and the height limit 7. online automatic function 8. many objects can be printed at the same time 9. standby energy saving mode 10. Haiwn-501 adopt Epson fifth generation industry print head nozzle. It is very good to print head. (2) Specifications print mode Object Print print size A1+（650mmX1250mm） Size 2180×1200×1050mm （W*L*H) Packing size 2210×1500×1350mm (W*L*H) Net weight 180Kg Gross weight 230kg print speed 20 sec（A4 photo） print height 1-100mm Print weight 50Kg print head cleaning method automatic transmission mode USB2.0 print resolution 540×720（4Pass）/1440×720（8Pass）/1440×1440（16Pass） media Crystal glass, stone, wood, metal, acrylic, plastic, rubber, leather, bamboo, shell, ceramic tile, organic glass, KT board, mobile phone, trademark, nameplates, lighter, pen, stationery, key, golf, toys, etc special ink Double 4 color （100ml/color） supply ink big capacity ink cartridge power AC220V/110V 50/60Hz±1Hz driver WINDOW95/98/2000/NT/XP Operating environment Temperature:5-32degree,Humidity:20-80% packing Wooden cases