over braided flexible steel conduit FITTINGS for iron ROLLING MILL cables Over Braided Flexible Conduit,Liquid Tight Conduit and Fittings For Demanding Projects Flexible metallic overbraided systems from delikon provide the best solution for the most demanding applications. Originally developed for use on machining and OEM applications, Delikon protective overbraided flexible steel conduit systems have continuously evolved to included specialised systems for chemical, engineering, offshore, rail, underground, tunnel and security applications. They are available in a wide selection of nominal conduit diameters up to 4 inches to best meet individual application requirements. Delikon overbraided flexible conduit systems protect vulnerable cabling on metal machining, welding or heavy plant where abrasion, spillage and increased temperature are all serious operational considerations. They also satisfy arduous demands on railway rolling stock and on essential trackside applications, such as signalling and communications In its various forms and with earth continuity via the system s fittings, the overbraiding can afford a standard, enhanced or high degree of EMI screening capability, protecting the cables carried within the flexible system. All overbraided flexible conduit systems provide an inherent low fire hazard installation or where electromagnetic interference EMI screening of conduit is required. Delikon overbraided flexible conduit systems also offer cost-effective alternatives to individually screened cables within applications where cross talk has no adverse effect. Additionally, the user gains the mechanical advantage of a cable management system, which affords the means to easily add, substitute or replace cables in an existing cable run at any time. =========================== http://www.delikon.com http://users6.nofeehost.com/delikon20/ ========================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="overbraided flexible steel conduit systems"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/airpot2.jpg" alt="Over Braided Flexible Conduit, Liquid Tight Conduit and Fittings For Demanding Projects">

Over Braided Flexible Conduit & conduit metal Fittings For Automation Cable Management In industry automation environment, Delikon Over Braided Flexible Conduit & Fittings provide very reliable performance; protection for abrasion and hot metal splash; flexibility; first-class mechanical strength and provide antistatic properties & EMC shielding for critical data & power cables. Delikon has been delivering solutions for this market for many years and can bring a complete range of over braided flexible conduits and conduit fittings to ensure you have the right systems for the job. ======================= http://www.delikon.com http://www.delikon.com/automat1.htm ======================= <p align="center"><a href="http://www.delikon.com/automat1.htm"><img border="0" src="http://www.delikon.com/images/automa1.jpg" alt="Over Braided Flexible Conduit & Fittings For Industry Automation Cable Management">

Over Braided Flexible steel Conduit Heavy series flex sheathing System for cable Over Braided Flexible Conduit Heavy series flex sheath for protection of industrial electrical cables against water, oil, grease, solvents, and the outer braiding provides protection against hot metal sparks and slag. ==================== http://www.delikon.com/smill.htm ===================== <p align="center"><a href="http://www.delikon.com/smill.htm"><img border="0" src="http://www.delikon.com/images/steelml1.jpg" alt="Over Braided Flexible Conduit Heavy series flex sheath"> <img border="0" src="http://www.delikon.com/images/steelml1.jpg">

steel overbraided flexible metallic conduit for oil industry electric wirings Braided electrical flexible metallic conduit for ship building industry Flexible Metal Conduits For Offshore & Heavy industrial Electrical Wirings Delikon brings great experience and flexible conduits systems to Heavy Industry & Offshore Applications. These applications require the emphasis on safety, security, and longevity. It also requires ease of maintenance. Flexible Metallic Liquidtight & Waterproof Conduits These metallic liquidtight and waterproof conduits are used to protect the vital network of cables that transfer information and electricity. They combines the value-added benefits of durability, chemical resistance, waterproof connections, ease of installation, and reduced friction all in one cost-effective system. Braided-shield Flexible Metal Conduits Braided-shield flexible conduit provides excellent Radio Frequency, as well as mechanical protection, resulting in improved data transmission. =========================== http://www.delikon.com http://www.semiconduits.com ========================= <p align="center"><a href="http://www.delikon.com/offshore.htm"><img border="0" src="http://www.delikon.com/images/offshore.jpg" alt="Flexible Metal Conduits For Offshore & Heavy Industry Electrical Wirings">

water proof PVC coated Galvanised Steel Flexible Conduit Vacuum PVC jacketed steel flexible conduit for high flex wiring installation It is suitable for use in both static applications where a tight bend diameter is needed and in dynamic use such as machining centers and robotics. Water-tight Flexible Metal Conduit Vacuum jacketed steel conduit for high-flex installations.(VJC) *Galvanized steel strip core (square locked or interlocked) *PVC Covered *1/4"~4" trade size *Water-tight A unique vacuum extrusion process allows this product to have a thin PVC jacket which does not restrict the great flexibility characteristics of the inner core. Flexible metallic conduit with PVC jacket: *PVC jacket provides water resistant. *Durable and long life. *Inner core made from galvanized steel strip. *Square locked construction for more flexibility or interlocked for more strength. Applications: Appliances, automotive wire & cable sleeving, industrial equipments, medical devices, machineries, wire conduits, air conditioning/heating and ventilation =========================== http://www.delikon.com http://www.semiconduits.com http://users4.nofeehost.com/delikon ========================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-707.gif" alt="PVC jacketed flexible steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/707newl1.jpg" alt="PVC Covered Galvanised Steel Flexible Conduit">

over Braided Flexible metal Conduit for heavy machinery wirings typically used for machineries and petrochemical industrial cable protection *1/4"~4" trade size *EMI shielding *Resists hot metal splashes Overbraided systems--- Electric Flexible Conduit systems for EMI shielding, abrasion and hot metal splashes resistance Comprises a standard conduit construction, with metallic overbraid. Typical electric wiring and cables protections applications where the following is a consideration: Electromagnetic Interference (EMI) *computers rooms *telecommunications * control systems Abrasion resistance *railway rolling stock *heavy duty industrial applications Mechanical integrity *security/CCTV *anti-vandal applications Hot metal splashes resistance *steel mills *petrochemical plants =========================== http://www.delikon.com http://users4.nofeehost.com/delikon ========================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/b-coil1.jpg" alt="Braided Flexible Conduits Assemblies"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/b-coil2.jpg" alt="Braided Flexible Conduits Assemblies">

Electric Flexible metallic Conduit and CONNECTOR for cable protections (Cut to length flexible conduit with connectors pre-assembled by Delikon) CUT TO LENGTH HIGH QUALITY FLEXIBLE CONDUITS WITH CONNECTORS PRE-ASSEMBLED: *Save your time and labor costs. Simply specify your requirements and let DELIKON do the jobs for you. *Complete Assemblies are full tested by DELIKON. High tensile and pull out strength is thus guaranteed. *Shipping space and cost is reduced. *Highly recommended for machineries and electrical contractors. ---------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon ============================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/assemb2.jpg" alt="Flexible Conduits Assemblies">

high performance ss braided racing car PTFE TEFLON HOSE,ptfe hose Delikon Teflon Brake/Clutch Lines High Pressure Racing teflon Hose Stainless Steel Braided PTFE Hose for High Pressure & High Temperature Off-Road Brake, Transmission, Clutch, Gauge, Nitrous Oxide, Power Steering, Hydraulic and Air Conditioning High Pressure & High Temperature for Brake, Clutch and Power Steering Lines Manufactured by Delikon to provide you with unsurpassed levels of performance and reliability for your tough performance applications. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility. Braided teflon ptfe hose FOR RACING CAR,motorcycle race hose Teflon hose is flexible and strong and when combined with stainless steel braid can perform under high pressure and continuous flexing and vibration conditions. Teflon hose can withstand temperatures from -100°F to +500°F (-73°C to + 260°C) under most operating conditions. The packaging envelopes of the modern racing car become tighter each year □ leaving less room for auxiliaries such as plumbing. Delikons braided TEFLON hose solves these issues. Delikons finest and lightest hose combines a high tensile strength stainless steel braid with a smooth bore Teflon tubing for increased flow and incredible flexibility. It also has significantly higher flow and pressure ratings than conventional teflon hose.Applications include fuel, lube, coolant and air for automobiles or marine engines. Features High tensile strengh stainless steel Outer Braid High-Temp. Smooth bore Teflon tubing Very High Pressure Rating Incredible flexibility Remains Flexible at Temperatures Between -94°F and +300°F Clean and Fast Flowing Teflon hosing offers several advantages, including: Unlimited chemical resistance against all chemicals, acids and caustic solutions, with the exception of liquid alkali metals and fluoride compounds. Temperature resistance from -40 to +260. Weather, Ozone and UV resistance. Aging resistance. Diffusion resistance; friction coefficient range between 0.05 and 0.20pm; flexibility; and high dielectric strength. Last but not least, Teflon hosing is suited for food\no transfer of taste or color. True bore sizing in most cases ============================= http://www.delikon.com http://users4.nofeehost.com/delikon ============================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/te4.jpg" alt="Braided teflon hose"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/formula1.jpg" alt="Racing hose"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/bikete2.jpg" alt="Braided teflon race hose"> Anodized Aluminum Hose Ends For Automobiles / OEM Products High Pressure Capabilities = Greater Reliability At High Speed! Suitable for: Fuel lines, Oil lines, Heater hoses, Radiator hoses ... HOSE ENDS - Hose ends come in the same sizes as all hoses in many different variations such as straight fittings, angle fittings, 30 degrees, 60 degrees, 90 degrees, 120 degrees, 150 degrees and 180 degrees. All fittings are also available in different materials such as anodized aluminum, and un-anodized polished finish. Suitable for almost all Street and Marine applications, and many Competition uses. ============================= http://www.delikon.com ============================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/auto17.jpg" alt="AN Plumbings">

over braided liquid tight metal conduit for industrial cable Overbraided metallic LiquidTight conduit with stainless steel braid is suitable for industry environments wirings protections. Overbraided LiquidTight metal conduit with steel Braid for contruction machine wirings Galvanised flexible Steel Conduit, Smooth PVC Covering, Metal Overbraid Braided Liquidtight Flexible EMC Shielded metal Conduit EMI/RFI Shielding electrical Flexible Conduit,Liquid-tight Model: YF-705 This conduit is designed to protect sensitive electronic circuits in applications such as communications, radar and data transmission from Electro-Magnetic and Radio Frequency Interference (EMI / RFI). Most suitable for radar equipments, airports, CNC machineries and PLC wirings in industrial environments. *Wire over-braiding provides more abrasion resistant, EMI shielding and resistance to hot metal splashes. *Explosion proof. Liquid-tight. *Durable and long life. *High tensile strength. *Inner core made from galvanized steel strip. *Square locked construction with packing for more tensile strength or air tightness. *Other packing materials: copper bonding (grounding) wire, PVC wire packing is also available. ======================= http://www.delikon.com http://www.semiconduits.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-705.gif" alt="EMI/RFI Shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits">

Heavy series water tight Braided metal Flexible Conduit for iron mill cable water proof Electric Braided Flexible metallic Conduit for petrochemical industry wirings Over braiding flexible metallic conduit,Liquid Resistant,EMI shielding Clean data transmission in a noisy environment is an ever increasing requirement on todays crowded factory floors. Braided flexible steel conduit systems provide excellent EMI and RFI shielding, as well as mechanical protection, resulting in improved data transmission for factory automations. OverBRAIDing Flexible metal conduit,water proof,Emc screening *Resists high temperature and hot metal splashes Constructions & features: 1)The core made of galvanized steel strips, hellically wound with PVC covering. Providing good mechanical protection and water tightness. 2) Metal wire over braiding provides increased pressure rating (explosion proof),abrasion resistant and EMI shielding. Suitable for: 1)Industrial enviroments, expecially suitable for protections of machineries cables and wiring in wet and hazardous locations. 2)Tele-communications equipments. EMI shielding of calbes. 3)Computer room wirings. 4)Public electrical facilities and installations. 1) Electromagnetic Interference (EMI) considerations: *computers rooms *telecommunications * control systems 2) Abrasion resistance considerations: *railway rolling stock *heavy duty industrial applications 3) Hot metal splashes resistance considerations: *steel mills *petrochemical plants,Chemicals,Heavy Industrial wirings 4) Mechanical integrity: *security/CCTV *anti-vandal applications ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-704.jpg" alt="Flexible metallic conduit,water proof,EMI shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/d3-704.gif" alt="Flexible metallic conduit,water proof,EMI shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits"> <p align="center"><a href="http://www.delikon.com/braids.htm"><img border="0" src="http://www.delikon.com/images/ship1.jpg" alt="For Ship building">

electrical small bore Stainless Steel flexible Conduit for instrument wirings Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

Heavy series over braided Liquid tight Conduit for industry wiring harness Wire Over-Braided Flexible Conduit ( SM-701 ) most suitable for demanding industrial electric wiring and cables protection applications. *Galvanized steel helically wound with PVC coating and wire over-braid. *Trade size: 3/8"~2" (Interlocked profile for increased tensile strength.) *Liquid-tight *Explosion proof (Suitable for use in Hazardous Location) *High Tensile strength MADE FROM INTERLOCKED CONDUIT WITH WIRE OVER-BRAID: *Wire over-braiding provides more abrasion resistant, EMI screening and resistance to hot metal splashes. *Explosion proof. Liquid-tight. *Durable and long life. *High tensile strength. *Inner core made from galvanized steel strip. *Square locked construction with packing for more tensile strength or air tightness. *Other packing materials: copper bonding (grounding) wire, PVC wire packing is also available. Applications: Suitable for use in Hazardous Locations; Industrial environments where higher abrasion resistance or screening are required. ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://delikon.com/images/sm701.gif" alt="Electric flexible conduit,Liquid-tight,Wire Over-braided">

over Braided Flexible metal Conduit for high temperature cable protection over braided flexible metallic conduit for industry aging equipment wirings,braided shield flexible conduit Overbraided Flexible Steel Conduit For High Temperature Wiring Inherently low fire hazard (ILFH), Braided Flexible Metal Conduit is widely used to counter mechanical stress and is highly flexible, and it is resistant against tensile stresses and transverse pressure. This conduit also offers excellent protection to cables against hot metal particles, and immunity from electromagnetic interference. Most suitable for use in Hazardous Locations, industrial environments and high temperatures. BRAIDED Electric Flexible metallic Conduit resists abrasion OR hot metal splashes for heavy machine wirings Flexible steel conduit for heavy mechanical stress,braided flexible steel conduit It is used to counter mechanical stress and is highly flexible, and it is resistant against tensile stresses and transverse pressure. Over braiding Flexible metal conduit for hot metal splashes shielding A galvanised steel conduit with stainless steel overbraid, making it particularly suitable for chemical and heavy industrial applications. The system affords high compression and crush strength as well as impact resistance. As part of the Braided system range it has inherent fire protection, high pull off strength and offers EMI screening. Electrical Flexible steel Conduit,metallic Wire Braided,EMI shielded Type SM-70001 Over braided flexible conduit is particularly used in (mechanical) critical situations, such as machine-building, steel works but also in transport systems and security. The SM-70001 is excellent in protecting cables against metal particles and against vandalism or rodents. Wire Over-Braided Flexible Conduit ( SM70001 ) typically used for machineries electric cables and wirings protection *Galvanized steel helically wound with wire over-braid. *3/8"~2" trade size *Resists high temperature and hot metal splashes *Wire over-braiding provide more abrasion resistant and EMI screening. *Explosion proof. *Durable and long life. *Inner core made from galvanized steel strip. *Low fire hazard *Resists hot metal splashes Applications: Most suitable for use in Hazardous Locations, industrial environments and high temperatures, such as welding machines and metal casting machines; Also for industrial environments where higher abrasion resistance or screening are required. ======================= http://www.delikon.com http://users4.nofeehost.com/delikon ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/sm70001.gif" alt="Electric flexible conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/sm71p1.jpg" alt="braided flexible steel conduits"> <p align="center"><a href="http://www.delikon.com/braids.htm"><img border="0" src="http://www.delikon.com/images/ship1.jpg" alt="For Ship building"> <p align="center"><a href="http://www.delikon.com/sm.htm"><img border="0" src="http://www.delikon.com/images/smsteel.jpg" alt="Overbraided Flexible Steel Conduit For High Temperature Wiring"> <p align="center"><a href="http://www.delikon.com/smill.htm"><img border="0" src="http://www.delikon.com/images/smmetal1.jpg" alt="Overbraided Flexible metal Conduit For High Temperature Wiring">

We adopt the advanced technologies and equipments introduced from TAFA in America to produce our spray wires. 1.SX-801 ultrahard wearablespray wire Application: SX-801 is a kind of tubular ultrahard nanometer-powder spray wire. It fully exerts the special effect of nanometer-powder so as to gain a superhard and ultrawear-resistent coating that reaches the targeted indexes. Main ingredients Chromium (Cr), nickel (Ni), boron (B) and Cr3C2 hard ceromics Microstructure of SX-801 spray coating The mixture of Cr3C2 and its resultant product during spraying acts as framework of the coating structure. NiCrB which have good ductility and corrosion resistance acts as the carrier of the hard particle mixture. The hard particle mixture evenly inlays into the NiCrB carrier to form a good coating. SX-800 wearable performance The hard particle mixture of Cr3C2 and its resultant product during spraying has good wearing resistant ability as the carbide of Cr has high hardness. SX-801 ductility performance The carbide of Cr has high hardness but its coefficient of thermal expansion differs greatly with the substrate. So there’s a need that carrier should have good ductility, in other words, it should have similar coefficient of thermal expansion as to the substrate. The NiCrB carrier and the rendering transition guarantee good ductility so that coating won’t break while temperature changes. SX-801 anti-corrosion performance NiCr has good anti-corrosion to protect the hard particles from falling off the carrier and the coating from losing effectiveness while functioning in corrosive environment. SX-801 basic parameters of coating Bond strength ≥45Mpa Thickness ≥0.6mm Hardness ≥HRC52 Porosity ≤1% Effective protecting period∶1 year Heat transfer coefficient∶34-38w/m. k linear expansion coefficient∶12.5×10^-6／℃ 2. SX-601 high-temperature and corrosion resistant powder-cored spray wire Typical application: when power generating boiler functions, the masses of gases such as SO2 and H2S and so on produced from high-sulphur coal burning will generate free-stuff sulphur atom in the high temperature environment. The free-stuff sulphur atom then reacts with the heating surface of the boiler and produces high-temperature corrosive sulphides such as FeS. The FeS will not protect the boiler surface for its porous and loosen structure. The SX-601 high-temperature and corrosion resistant powder-cored spray wire is developed by the researchers from our company and TAFA and made through nano-coacervating technology. Main ingredient Ni, Cr, Ti The effect of Ni in coating Ni has stable cubic structure and good ductility that makes the coating having nearly the same heat expansion coefficient with boiler tube. The effect of Cr in coating Cr can improve the anti-sulfurizing performance of Ni-Cr alloy, and the Cr2O3 protection surface has good wearable ability. The effect of Ti in coating Ti can improve the bond strength of coating and it can form a spinel type structure along with Cr and Oxygen. Performance of SX-601 coating High-temperature resistant，anti-abrasive wear, abrasion-resistant, fretting, working temperature＜900°C SX-601 basic parameters of coating Bond strength ≥50Mpa Thickness ≥0.35mm Hardness ≥HRC45 Porosity ≤1% Effective protecting period∶4 years Heat transfer coefficient∶38□45w/m. k linear expansion coefficient∶12×10^-6／℃

We produce the HVOF powders as below: the WC-12Co powder: hardness: HV03~1100-1300, working temperature: ≤540℃. This powder makes a hard, densified coating with good wearing-resistant ability for abrasion and erosion. The coating is the hardest one for wearing-resistance under 540 ℃, and the best one for abrasive and erosive wearing under medium and low temperature. It’s recommended to be used in particle abrasion, hard-surface abrasion, fretting wear and particle erosion. This powder can be applied in supersonic flame spraying, plasma spraying and Detonation gun spraying process. It’s widely used in wear-resistant coating for rollers, engine blades, axles and so on. the Cr3C2-20NiCr powder: hardness: HV03~900-1100, working temperature: ≤920℃. This powder makes a very hard and desified coating, which is the most ideal abrasion-resistant, oxidation-resistant, and anti-erosive coating under medium and high working temperature. It’s recommended to be used in flue gas-erosive wear, particle abrasive wear, fretting wear and hard surface abrasion. This powder can be applied in supersonic flame spraying, plasma spraying and Detonation gun spraying process. It’s widely used in wear-resistant coating for boiler piping of Power plant, Metallurgical furnace roller, Metallurgy core roller, Oil axial surface and so on.

The Computer Programme Control, Full-Automatically Arc Spray Equipment, is one kind of our company own research products. *Such equipment can be equipped with 2 spray guns or more, those spray guns can spraying at the same time, equal to 2 or more absolute arc spray equipment. So it can improve efficiency highly. *Such equipment very fit to spray at some large area objects, such as boilers, dryers etc. And the coating is much more uniform and excellent. It can spray 24 hours continuously. *You can monitor the on-site spraying situation at a long distance, video and transmit to internet. *Operate process: Before spray, the operator adjust the spray gun location, then can start to run the equipment. No need operate the spray guns by hand. You also can move the object so that the spray gun can spray at it automatically. *SX800W Type Computer programme control, Full-automatically Arc Spray Equipment,1 power supply +1 controller +2 spray guns +1 track machine)

Arc spray gun Product information High velocity arc spray gun Measurement: 460×480×670(mm) The arc spray equipment integrates air control and electric control together to make the structure compact and operating simple. It’s highly powerful and the current output distance can be above 100m. The DC voltage makes operation even safer and stabler. Air pressure Electricity input Output power Output open-curcuit voltage Power weight regulating voltage >0.5Mpa 380V(Three-phase),50HZ 16KW 18-44V 178kg 0-24V The high velocity arc spray gun is a high effeciency and low power-consuming product, it integrates air control and electric control together so that the operating is more convenient and you can do aerial work in a long distance. The velocity of micro paticles can reach above 420m/s. The axial direction air speed can reach 600m/s. The deposition rate of coating is above 75%. Spray gun weight Air pressure Air consuming Wire feeding gravitation Feeding velocity regulating grade Input voltage 2.65kg >0.5Mpa >1.85m3/min >8kg stepless speed regulating ≤24V(DC)

Plasma spray equipment Plasma spray has become an indispensable way of processing in the fields of modern industries, national defenses, and science and technology. All kinds of metal, alloy, ceramic, and cermet can be used through plasma spray to make good wearable, anti-corrosive, high-temperature-resistant, high-temperature-oxidation-resistant, conducting or insulated, far infrared radiation coating. Plasma spray is an effective way for the work piece to gain good working performance, prolong its useful life, improve quality, and save precious metal material. Configuration of SX-80 plasma spray equipment SX-80 absorbs the experiences of PT-A3000 and METCO-9M plasma spray equipment and its performance level is equivalent to METCO-9M. It mainly consists of main electricity supply, control cabinet, transfer box, powder feeder, spray gun and heat exchanger. SX-80 Main power supply silicon controlled rectifier, biggest input power 105kw, duty cycle 100%, biggest output power 80kw, electric current fluctuation range ±1-2%，when electric grid fluctuation is within ±15%, it can normally work. SX-80 Transfer box It’s the transfer center of spray equipment which connects power supply, control cabinet, heat exchanger and spray gun together. It has high-frequency ignition, waterway and gas circuit alarm equipment insides. The box can be moved freely and the standard length of cable is 5m. SX-80 Control cabinet It’s the control center of the whole spray equipment. Single-phase 220V, 1KW, float flowmeter equipped, current and voltage digisplay. Having manual, automatic and economic working modes. Alarm and malfunction indicating function, generally it alarms under such conditions: when the main and assistant gas pressure＜0.3MPa or the main gas flow rate＜30L/min when water temperature＞50°C or water flow rate＜8L/min SX-80 Powder feeder Supply one set of two-tubed powder feeder powder measurement scope: 5-200μm；powder repeated-feeding error rate＜±1% The two tubes can feed powder at the same time, feeding rate is between 20-150g/min. SX-80 Spray gun Supply imitative METCO 9MB spray gun, main working gas is argon or nitrogen, assistant gas is hydrogen. Working electric current: 100-800A. Working voltage: Ar+H2: 50-75V, N2+H2: 50-80V 1. Imitative 9MB machine-made gun 2. Imitative 9MB manual-made gun 3. Large-inner-hole spray gun Supply spray gun accessories: GH、G、GP、GE type spray mouth, powder feeding and cooling air jetting-shelf, water cooled cable, electrode tip, insulator, obturating ring, special purpose tools. Also we can supply customer imitative F4 spray gun (machine-made or manual-made) and accessories such as water cooled cable, spray mouth, electrode tip, powder feeding shelf, powder feeding mouth, obturating ring and special purpose tools. SX-80 Heat exchanger We provide two kinds of heat exchangers: (1), water pumping heat exchanger has interior and exterior circulation. The interior circulation cools down the spray gun by distilled water, while the exterior circulation cools down the distilled water by tap water. We use imported water pump and below is the parameter of this heat exchanger: the cooling capacity 20000kcal/h power 8KW Pump pressure 0.8MPa Water flow 8-20L/min Water temperature regulating scope 20-38℃ (2), Freon- refrigerated heat exchanger consists of imported compressor, water pump, and heat exchanger. the cooling capacity 25000kcal/h power 13KW Pump pressure 0.8MPa Water flow 8-20L/min Water temperature regulating scope 10-28℃

SX-5000 HVOF equipment The principal of SX-5000 HVOF spray equipment is: the mixture gas of oxygen and fuel gas is sent to the burning area of spray gun exit under high pressure. Then the burning gas is accelerated to form a supersonic flame with the help of peripheral compressed air. The spray powder is sent into burning flame and make a functional coating. SX-5000 consists of spray gun, powder feeding machine, control system, heat-exchanger system and pipeline system. It’s a compact equipment with the traits of easy-operating, stable working performance, low fuel consumption and high-quality coating. Control system Spray gun Spray gun with manual and machine fixed way of operation. Gas needed: oxygen and propane (C3H8), weight: 2kg. velocity of spray particles: ≥450m/s. It can work a long time stably. Parameters of SX-5000 number item parameter 1 Flame velocity 2100m/s 2 Flame temperature 2700℃ 3 Spray gun power 100KW 4 Spray particles velocity 500~600m/s 5 cooling Water cooling 6 Cooling water-flow 9.5L/min 7 Coating porosity <1% 8 Coating strength >70MPa 9 Powder measurement 5-120μm 10 Fuel gas(C3H8)pressure and flow 0.65MPa 88L/min 11 Oxygen pressure and flow 1.1MPa 305L/min 12 Air pressure and flow 0.75MPa 440L/min 13 nitrogen pressure and flow 1 .2MPa 18 L/min 14 Hydrogen pressure 0.35MPa 15 Spray gun outside measurement 420×230×50 16 Spray gun weight 2.8Kg Powder feeding machine The SX-5000 powder feeding machine is used to store spray powder and send them to burning flames according to technological requirements. The feeding gas is nitrogen, which pulverizes the powder and sends the pulverized particles along with the gas to spray gun. You can regulate the feeding velocity by the localizer on the regulating control panel. Parameters of the feeding machine number item parameter 1 Feeding pattern Pulverizing and gas pressure 2 Volume of single can 3.0L 3 Feeding gas nitrogen 4 Pressure of feeding gas 1.1-1.3MPa 5 Feeding velocity 0~160g/min 6 Feeding accuracy ±1% 7 Feeding gas flow 400-800L/h 8 Outside measurement of feeding machine 500×460×1300mm 9 Weight of feeding machine 50Kg

SX-600w supersonic arc spray equipment The arc spray equipment we produce has many different types. It can be equipped with one spray gun or several guns which can act as several independent machines. It can also be operated by hand or by auto tele-computer control. Depending on our strong and solid technology strength, we can develop high-power and special sized equipment according to customer’s requirement. （we provide full-range technical training and instructing, take care of equipment installation and debugging, investigate our customer the effectiveness and performance of the equipment regularly, and take the responsibility of free repairing if any quality problem occur in one year.） Supersonic arc spraying is a new technology developed from normal arc spraying technology. It has more excellent performance compared with normal arc spraying, and recently has been applied broadly in fields such as machinery, chemical, electricity generating, metallurgy and especially has excellent performance in resolving the wearing and corrosion problems of boiler tube of electricity generating plant. Hence it brings safety and stable operation and good economic and social benefits to those power generating plants. Supersonic arc sprayer sends two spraying metal wires to the two electric mouths of spray gun, and the electric mouths link to the high-current and low-voltage two electrodes. When the metal wires contact with each other, there would be a short circuit which would make an arc, and the end of metal wire would be melted by the 5000℃heat produced by the arc. Then the melted wire would be pulverized to micromelting points by high-velocity compressed air. These micromelting points then are sprayed on the surface of workpiece by the compressed air with a supersonic speed (above 400m/s) to make a coating. The supersonic spray coating has smaller and compact Microstructure, and stronger bond strength compared with normal arc spray coating. SX-600Wsupersonic arc sprayer is developed on the base of SX-400 arc sprayer. It adopts Laval acceleration tube in the spray gun and when the compressed air get through Laval tube the airflow speed will be markedly accelerated. The newly developed supersonic arc spray machine consists of power supply, supersonic arc spray gun, wire feeder, control system and compressed air system. We develop this equipment precisely to make sure that it can work stably and effectively. SX-600w abrasive blaster Characters 1. Stable and convenient This equipment solidifies the operating programs by integrated circuit to prevent from machine damage by misoperating of workers, and thus to protect the safety of operators and the equipment. It can spray a long distance away from the equipment by tele-operating switch. Also the equipment has steady output voltage and current, has good capacity of anti-interference and is sensitive against regulating so that the coating can be even and oxidize burning loss be little to prolong its useful time working in bad environment. 2. High bond strength of coating The bond strength of coating can reach 70Mpa compared with generally 30-40Mpa of common arc spray coating. The wire is well atomized into tiny particles and then the particles are sprayed with a high speed to make a good and fine coating which has the porosity equal or less 0.5%. By this way the wear-resistant and anti-corrosive ability of coating is markedly improved. 3. Workpiece won’t deform and its structure won’t be influenced. Generally the temperature rise of workpiece won't exceed 100 ℃when spraying, so the workpiece won't deform. And the spraying heat won't take effect directly on the surface so as to influence the structure of workpiece. 4. High efficiency and wide range usage. The equipment has high spray and electric power efficiency; generally it can spray metal wires up to 15kg per hour. It's suit for onsite construction, and can use all kinds of metal and metalceramic materials(solid and cored), such as alloy wires, Mo, Al, Zn, red copper, copper alloy, Babbitt etc. It is widely applied in spraying wearable and anti-rusting coatings for boiler four kinds of tubes, coal pulverizing system (fan impeller and scroll casing), roller, dryer, axis, mould and so on. 5. Wide spray gun extending range and pull / push way of wire feeding to pick The spray gun is equipped with 30-meter-long cable, air tube and 8-core control cable, so it can spray at remote places about 30 meters away from the equipment. There are two ways of feeding spray wires, pull and push. 6. No need to change wearing parts frequently We have patent conductive nozzle which is wearable and greatly enlarges useful time of wearing parts. This effectively helps to reduce the spray costs and improve working efficiency and coating quality. 7. Convenient maintenance and repair. We take maintenance and repair work into our consideration during designing the equipment and spray gun which make it convenient to maintain and repair. Main parameters: power supply: three-phase 380V, 50Hz rated current: 600A rated input power: 22KW input current: 22A output volt:45V flat characteristic output current:≤400A load factor∶60% volt regulating gear: 3 insulating grade: E wire diameter∶φ2mm spray efficiency: zinc 5-12kg/h, Al 8-10kg/h, alloy 8-12kg/h measurement:60×45×85cm net weight∶205kg We also afford all sizes of accessories such as sand blasting machine, water-oil separator, spray exposure suit, helmet, breathing filter with the equipment.

SX-400w Arc Spray equipment SX-400w arc spray equipment is a high-efficiency and low energy consumption machine we develop. It uses the heat generated from electricity arc to melt metal wires, and pulverizes and cools down the molten wire with compressed air, then spray the pulverized metal particles to preprocessed surface at a high velocity to get a perfect coating. Applications: Anti-corrosive coating for steel structure of steel tower, bridge, water shutter, vessel and so on. Surface repair work of work pieces such as paper-making dryer, printing roller, bent axis. Electrode spray in capacitance and electric porcelain fields. SX-400w Arc Spray Equipment consists of arc spray gun and electricity power supply, with air compressor and wire feeder as accessories. It uses integrative electro-gas switch to make operation simpler and suitable for aerial work and fieldwork in a long distance. SX-400w is consists of spray power supply and spray gun, with air compressor, air filter and wire feeding shelf as accessories. It uses integrative electro-gas switch to make operation simpler and suitable for aerial work and fieldwork in a long distance. The velocity of pulverized particles reach 420m/s especially up to 600m/s in axis airflow, and the coating deposition rate is above 75%. Spray material Wire diameter Working current No-load volt Air hat diameter Maximum spray efficiency Zinc wire 1.2-3.0 80-210 18-30 6-8 30 Al wire 1.2-3.0 120-240 25-38 6-8 9.5 Steel wire 2.0 150-200 35-40 7-8 6 High carbon steel wire 2.0 150-220 10-44 8 5.5 Stainless steel wire 2.0 150-220 10-44 8 5.5 Zn-Al, Pb-Sn alloy wire 1.2-2.0 80-110 18-28 7 Air pressure Input power supply Output efficiency Output no-load volt Power supply weight Regulating volt >0.5Mpa Three phase 380V,50HZ 16KW 18-44V 178kg 0-24V Spray gun weight Air pressure Air consumption Wire feeding gravitation Velocity regulating range Input velocity 2.65kg >0.5Mpa >1.85m3/min >8kg stepless speed regulating ≤24V(DC)

Over Braided Flexible Conduit & metal conduit Fittings of Industry Automation Cable Management In industry automation environment, Delikon Over Braided Flexible Conduit & Fittings provide very reliable performance; protection for abrasion and hot metal splash; flexibility; first-class mechanical strength and provide antistatic properties & EMC shielding for critical data & power cables. Delikon has been delivering solutions for this market for many years and can bring a complete range of over braided flexible conduits and conduit fittings to ensure you have the right systems for the job. ======================= http://www.delikon.com http://www.delikon.com/automat1.htm ======================= <p align="center"><a href="http://www.delikon.com/automat1.htm"><img border="0" src="http://www.delikon.com/images/automa1.jpg" alt="Over Braided Flexible Conduit & Fittings For Industry Automation Cable Management"> <img border="0" src="http://www.delikon.com/images/automa1.jpg">

extreme TEMPERATURE RUBBER COATED metal LIQUID TIGHT CONDUIT Thermo plastic Rubber Covered Steel Liquid Tight Conduit ( YF-906 ) For Extreme Temperature Environments: -60C to +150C Type YF-906 Thermoplastic Rubber Covered Steel Liquid Tight Conduit is well suited for exposure to extreme climatic conditions. It is also widely used on industrial process equipment such as Annealing Ovens, Lumber Kilns, Foundries, Refrigeration, etc. It is a conduit designed to withstand an extreme temperature range. Used in situations where concerns of resistance to temperature exposure exist. These include heavy outdoor equipment, boilers, furnaces and sub-zero areas. ======================= http://www.delikon.com/906.htm ======================= <p align="center"><a href="http://www.delikon.com/906.htm"><img border="0" src="http://www.delikon.com/images/706lhdw1.gif" alt="Thermoplastic Rubber Covered Steel Liquid Tight Conduit">

over braided Flexible Conduit & metal conduit fittings for petroleum refinery wiring for cable management and protection of critical wiring in Mining, Oil and Gas, Ship Building, Beverage and Machine Tools Industry Liquid Tight Conduit, Overbraided Liquid Tight Conduit, Overbraided Flexible Conduit, Conduit Fittings & Connectors for cable management and protection of critical wiring in Mining,Oil and Gas,Ship Building,Beverage,machine Tools Industry http://www.delikon.com/refine.htm <p align="center"><a href="http://www.delikon.com/cctv.html"><img border="0" src="http://www.delikon.com/images/refin1.jpg" alt="Liquid Tight Conduit, Overbraided Liquid Tight Conduit, Overbraided Flexible Conduit, Conduit Fittings & Connectors for cable management and protection of critical wiring in Mining,Oil and Gas,Ship Building,Beverage,machine Tools Industry">

Over Braided Flexible Conduit & metal conduit Fittings of Industry Automation Cable Management In industry automation environment, Delikon Over Braided Flexible Conduit & Fittings provide very reliable performance; protection for abrasion and hot metal splash; flexibility; first-class mechanical strength and provide antistatic properties & EMC shielding for critical data & power cables. Delikon has been delivering solutions for this market for many years and can bring a complete range of over braided flexible conduits and conduit fittings to ensure you have the right systems for the job. ======================= http://www.delikon.com http://www.delikon.com/automat1.htm ======================= <p align="center"><a href="http://www.delikon.com/automat1.htm"><img border="0" src="http://www.delikon.com/images/automa1.jpg" alt="Over Braided Flexible Conduit & Fittings For Industry Automation Cable Management">

The temporary fencing are mainly used on the city road ,the highway ,pool ,garden , security of building etc,it is for stopping the crowds , animals and vehicles etc . Variety : □welded mesh fence ,chain link mesh fence , expanded metal fence etc . Finish of surface : hot dipped galvanized ,electro galvanized , PVC coating ,PVC spraying ,PVC after galvanized ,paint spraying etc. Characteristics: even surface, firm welded structure, precise opening etc . It has the good properties of corrosion-resisting ,oxidation-resisting ,weather-resisting and aging-resisting . Specification : 2300 x 2000mm , 2200mm x 2000mm etc, we can do the specification as per customer’s requirement .

We produce all kinds of mesh fences:□ mesh fences for expressway & railway, airport fences ,garden fences, security fences, decorative fences, barbed wire fences, chain link mesh fences, expanded metal fences, etc. Characteristics: even surface, firm welded structure, precise opening etc . It has the good properties of corrosion-resisting ,oxidation-resisting, weather-resisting and aging-resisting . Variety : □welded mesh fence ,chain link mesh fence , expanded metal fence etc . Finish of surface : hot dipped galvanized ,electro galvanized , PVC coating ,PVC spraying ,paint spraying etc.

We produce all kinds of mesh fences:□ mesh fences for expressway & railway, airport fences ,garden fences, security fences, decorative fences, barbed wire fences, chain link mesh fences, expanded metal fences, etc. Characteristics: even surface, firm welded structure, precise opening etc . It has the good properties of corrosion-resisting ,oxidation-resisting, weather-resisting and aging-resisting . Variety : □welded mesh fence ,chain link mesh fence , expanded metal fence etc . Finish of surface : hot dipped galvanized ,electro galvanized , PVC coating ,PVC spraying ,paint spraying etc.

Braided Flexible steel Conduit Heavy series flex sheath System Over Braided Flexible Conduit Heavy series flex sheath for protection of industrial electrical cables against water, oil, grease, solvents, and the outer braiding provides protection against hot metal sparks and slag. ==================== http://www.delikon.com/smill.htm ===================== <p align="center"><a href="http://www.delikon.com/smill.htm"><img border="0" src="http://www.delikon.com/images/steelml1.jpg" alt="Over Braided Flexible Conduit Heavy series flex sheath"> <img border="0" src="http://www.delikon.com/images/steelml1.jpg">

heavy series over braided Flexible Conduit & metal conduit fittings connector for oil refinery industry wiring for cable management and protection of critical wiring in Mining, Oil and Gas, Ship Building, Beverage and Machine Tools Industry Liquid Tight Conduit, Overbraided Liquid Tight Conduit, Overbraided Flexible Conduit, Conduit Fittings & Connectors for cable management and protection of critical wiring in Mining,Oil and Gas,Ship Building,Beverage,machine Tools Industry http://www.delikon.com/refine.htm <p align="center"><a href="http://www.delikon.com/cctv.html"><img border="0" src="http://www.delikon.com/images/refin1.jpg" alt="Liquid Tight Conduit, Overbraided Liquid Tight Conduit, Overbraided Flexible Conduit, Conduit Fittings & Connectors for cable management and protection of critical wiring in Mining,Oil and Gas,Ship Building,Beverage,machine Tools Industry">

EMc screening and emi shield braided flexible conduit systems In applications where electromagnetic interference can be of particular concern, Delikon has a range of dedicated over braided flexible conduit systems that can provide the required standard of protection for cables. The systems provide high EMI screening and offer a range of protection to the cables carried by the system. In combination with the system's specially designed metallic fittings, the flexible conduit system can afford a high degree of EMI screening capability for a range of industrial and commercial applications. Overbraiding also increases the security of installations in sensitive or high risk public areas, typical applications being underground, communications, public safety, security, lighting and CCTV installations. Delikon screened flexible conduit systems offer cost-effective alternatives to individually screened cables within applications where cross talk has no adverse effect. Additionally, the user gains the mechanical advantage of a cable management system, which affords the means to easily add, substitute or replace cables in an existing cable run, at any time. http://www.delikon.com/braid.html <p align="center"><a href="http://www.delikon.com/braid.html"><img border="0" src="http://www.delikon.com/images/braidc1.jpg" alt="EMI screening capabilities in braided flexible conduit systems">

Delikon Flexible Conduit and conduit fittings For CCTV wiring Protection Solutions DELIKON's whole range of flexible conduit systems provides dedicated protection to vulnerable CCTV systems, not only from the elements, but also from the threat of vandalism. The wide range of DELIKON metallic and non-metallic flexible conduit systems is specifically designed to provide ingress protection to the vulnerable umbilical cabling used on CCTV cameras and networks. The flexible systems are ideal for both static and rotating cameras. Liquidtight conduit is available for systems that are affected by weather, such as torrential rain, which could damage the wiring and equipment. Small bore flexible stainless steel conduit, an extra-flexible product, available in the smaller diameters, is designed for tight-spot installation and where continuous flexing is required of a stainless steel wound hose. Delikon braided flexible conduit with metallic overbraid is a popular choice for vulnerable systems, offering. protection for electrical, coaxial, data and telecommunications cabling. Braided flexible conduits also provide the benefit of EMI screening and protection from vandalism. Dlikon braided flexible rubber conduit with metallic overbraid is a best choice for industrial systems, as it has all the oil & chemical resistance benefits associated with the rubber conduit, without the weight and restrictions of metallic conduit. Moving and rotating cameras require unrestricted flexibility, Delikon has a full range of both straight and angle swivel connectors. A whole range of quality fittings is specifically designed to maintain system integrity including fixed and swivel fittings. http://www.delikon.com/cctv.html <p align="center"><a href="http://www.delikon.com/cctv.html"><img border="0" src="http://www.delikon.com/images/cctvl1.jpg" alt="Flexible Conduit System For Complete CCTV Cable Protection Solutions">

The Vibrating Feeder is used to transfer the large-size materials and granular materials from hopper to receiving device uniformly, periodically and continuously in the production flow and feed materials into the crusher continuously and uniformly in the sand or stone production line. The vibrating feeder is widely used to match the crushing and sieving equipments in many industries including metallurgy, mining, beneficiation, building material, chemical and etc. Working principle: There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the feeder. Characteristics of Vibrating Feeder: Smooth vibration, reliable operation, long service life, low noise, low power consumption, easy to adjust, simple structure, easy to install, light weight, small volume, simple maintenance.

Shaking table is used to classify the granularity 2-0.2mm ore and ore slime, tungsten, niobium, manganese, chromium, titanium, zinc, gold, iron and other metallic minerals. Specification L-S:(6-S) Stroke(mm):10-30 Jig frequency (times/min):240-360 Landscape angle(°):0-8 Feed particle(mm):2-0.074 Feed ore density(%):15-30 Water quantity(t/h):0.4-0.8 Surface size of table(mm):152*1825*4500 Electric motor(kw):1.1 Capacity(t/h):0.5-1.2 Weight(kg):1012 Overall dimensions(mm):5454*1825*1242

Floatation Machine Flotation machine is widely used in rough, fine selection and counter flotation process of ferrous metal and non-ferrous metal such as fluorite, talc, molybdenum, copper, lead, zinc, nickel, etc. Advantages of our floataion machine: Compared with the conventional flotation machine,the grade of our new flotation machine is increased by 4-6%,the recovery rate is increased by 8%,and the capacity is incresed by 12%. Working principle: The impellers are driven through V belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board. Each chute can inhale gas, sink magma, separate. No assiting equipments are required,and it must be levelly installed. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface, easy to adjust. The impeller also owns the upper and lower retroversion blade. The upper one makes the magma cycle upward, while the lower one makes the magma cycle downward.

Cone crusher is suitable for crushing various kinds of ores and rocks of medium or above medium hardness. Cone crushers have many features like stable structure, high efficiency, easy adjustment, low operating cost and etc. The spring safety system works as an overloading protection system which allows metals to pass through the crushing chamber so as not to damage cone crusher. The safety system adopts dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to ensure reliable performance. The crushing chambers are depending upon the feeding size and the fineness of final products. The standard type(PYB) is applied to medium crushing; the medium type is applied to medium or fine crushing; and short head type is applied to fine crushing. Working principle of Cone crusher: Cone crusher crushes materials through the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, which is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts.The lower part of vertical shaft is installed in the eccentric sleeve.

Rotary Kiln Rotary kiln is refers to rotating calcining kiln (also known as rotating kiln), which belongs to thermal equipment. Rotary kiln can be divided into metallurgy kiln, chemical engineering kiln, and building material kiln according to its different dealing materials. The building material kiln is mainly used in calcining clinker cement, limestone and porcelain granule. Metallurgy rotary kiln is mainly used for the magnetizing calcining of lean iron ore in iron and steel plant in metallurgy industry, the chromites and josephinite oxidizing calcining , calcining of dewalquite and clinker aggregate and aluminum hydroxide roasting in aluminum factory; Chemical engineering rotary kiln is used in chemical plant for chromium ore and chromium ore powder roasting. The limestone kiln( activity limestone kiln ) is used for calcining activity lime and dolomite in iron and steel plant and ferroalloy works Rotary kiln is the equipment which is widely used for dealing with solid material mechanically, physically and chemically in building material, metallurgy, chemical, engineering and environment protection industries

Rotary drum dryer Rotary dryer is used for drying material with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. It can be used for drying many kinds of materials such as limstone slag, coal powder, clay stone etc. It has advantage of reasonable structure, high efficiency, low energy consumption. Rotary dryer mainly consists of rotary body, raw material feeding plate, lifting blade, driving and supporting device, sealing ring and etc. Working principle of operation: The raw material plate which is arranged reasonably with chargeable angles in order, throws moisture materials into the rotary cyclinder. The water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the material would be dryed

HEAVY SERIES water proof Braided Flexible metal Conduit for petroleum industrial cable water proof Electric Braided Flexible metallic Conduit for petrochemical industry wirings Over braiding flexible metallic conduit,Liquid Resistant,EMI shielding Clean data transmission in a noisy environment is an ever increasing requirement on todays crowded factory floors. Braided flexible steel conduit systems provide excellent EMI and RFI shielding, as well as mechanical protection, resulting in improved data transmission for factory automations. OverBRAIDing Flexible metal conduit,water proof,Emc screening *Resists high temperature and hot metal splashes Constructions & features: 1)The core made of galvanized steel strips, hellically wound with PVC covering. Providing good mechanical protection and water tightness. 2) Metal wire over braiding provides increased pressure rating (explosion proof),abrasion resistant and EMI shielding. Suitable for: 1)Industrial enviroments, expecially suitable for protections of machineries cables and wiring in wet and hazardous locations. 2)Tele-communications equipments. EMI shielding of calbes. 3)Computer room wirings. 4)Public electrical facilities and installations. 1) Electromagnetic Interference (EMI) considerations: *computers rooms *telecommunications * control systems 2) Abrasion resistance considerations: *railway rolling stock *heavy duty industrial applications 3) Hot metal splashes resistance considerations: *steel mills *petrochemical plants,Chemicals,Heavy Industrial wirings 4) Mechanical integrity: *security/CCTV *anti-vandal applications ======================= http://www.delikon.com ======================= <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/YF-704.jpg" alt="Flexible metallic conduit,water proof,EMI shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/d3-704.gif" alt="Flexible metallic conduit,water proof,EMI shielding"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/cbraidst.jpg" alt="braided flexible steel conduits"> <p align="center"><a href="http://www.delikon.com/braids.htm"><img border="0" src="http://www.delikon.com/images/ship1.jpg" alt="For Ship building">

small bore Stainless Steel flexible Conduit for laser wiring,thermal coupler and sensor wirings,STAINLESS STEEL FLEXIBLE CONDUIT Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================