small bore flexible Stainless Steel Conduit for themal coupler wirings Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

small bore Stainless Steel flexible Conduit for sensor and laser cable,small metal flexible hose Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

small bore Stainless Steel flexible Conduit for laser sensor thermal coupler wirings Flexible stainless steel conduit for electric wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

Main technique target of Air separation plant Products Capacity(m3/hr)Purity(%) Pressure(Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8% 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment ofAir separation plant 1. Air compressor 2. Air tank 3. Precision filter 4. Pre-cooler 5. Water separator 6. Purifier 7. Heater of Purifier 8. Rectification column 9. Heater of the rectification column 10.Expansion Turbine 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air separation plant * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of GB8982-1998<medical oxygen> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security _ The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

small bores Stainless Steel flexible Conduit for thermal coupler cable protection,sensor wiring flexible conduit Flexible stainless steel conduit for electrical wirings protections Strip wound small ID flexible metallic conduit,hose for electrical wirings armoring braided Small BORE Flexible stainless steel conduit,for automobile & industry wiring harness Optical Fiber and sensors wirings protects Flexible metal conduit Small bore Flexible metal conduit,for protection of instrument wirings Small id Flexible Stainless Steel Conduit ( AT ) Small bore instrumentation tubing flexible conduit flexible stainless steel conduit for electric wirings *Stainless steel strip (square locked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protections. MADE FROM STAINLESS STEEL STRIPS: *ALL Stainless steel construction for corrosion resistant. *Durable and long life. *Designed for tight-spot installation and where continuous flexing is required Applications: Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, electronic instruments and industrial control wirings. Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics. SMALL BORE HOSE Delikon manufactures unique tubing that is relied on in numerous industries. The tubing is produced by helical coiling of a cold-rolled metal strip onto a spindle, with the helical coils being linked with each other by means of a special type of strip profile. Basic materials for the strip are stainless steel or galvanized steel strip. However, other metals are also available. Applications: Instrumentation tubing is used by manufacturers of various industries, such as Process & Control Instrumentation, Measuring & Controlling Devices, Analytical Instruments, Medical Instruments and many others with specific applications including temperature measuring, wiring conduit or armor cable and protective casing. Instrumentation tubing is made in two configurations, or constructions, commonly called SquareLok and InterLok, and is often abbreviated as SL and FI. -------------------------------- http://www.delikon.com http://users4.nofeehost.com/delikon -------------------------------- <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/at4.jpg" alt="Flexible stainless steel conduits"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atnew1.jpg" alt="small bore tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/atC.gif" alt="small bore Instrumentation tubing"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/fibre2.jpg" alt="prtecting your inspection equipment wirings"> Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications. TYPE: AT-SL-JACKETED -------------------------------- The PVC covering is applied onto the metal surface with a Vacuum process. The finished surface will have a spiral corrugated pattern. It is most suitable for tight-spot installation and where a certain water tightness is required <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacketp.jpg" alt="Flexible stainless steel conduits with pvc jacket"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/jacket.gif" alt="Flexible stainless steel conduits with pvc jacket"> TYPE: AT-SL-EXTRUDED -------------------------------- The PVC covering is extruded onto the metal surface, thus producing a smoother finished surface. when used with liquid-tight fittings it offers a higher degree of liquid tightness than the vacuum jacketed type. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/extrudep.jpg" alt="Flexible stainless steel conduits with extruded plastic covering"> TYPE: AT-SL-SLEEVED -------------------------------------- A short length of the AT-SL tubing is directly inserted into a thermoplastic sleeve. A very smooth outer surface and a very uniform thickness of sleeving is ensured. For cut to length OEM orders. <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert1.jpg" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> <p align="center"><a href="http://www.delikon.com"><img border="0" src="http://www.delikon.com/images/insert2.gif" alt="Cut to length Flexible stainless steel conduits inserted into plastic sleeve"> TYPE: AT-SL-BRAIDED High tensile strength metal wires are tightly braided onto the AT-SL small bore flexible metal tubing for optimum protection. It provides increased abrasion resistant, improved EMI screening, and resists hot metal splashes. <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid1.gif" alt="small bore Instrumentation tubing with metal braiding"> <p align="center"><a href="http://www.delikon.com/at.html"><img border="0" src="http://www.delikon.com/images/atbraid2.gif" alt="small bore Instrumentation tubing with metal braiding"> ============================= http://www.delikon.com ===========================

Summary ∶ Technical specifications Type Y26 Weight 26 (Kg) Length 650 (mm) Cylinder dia φ65 (mm) Piston stroke 70 (mm) Working pressure 0.4 (Mpa) Impact energy ≥30 (J) Impact frequency ≥23 (Hz) Air consumption ≤47 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type YT24 Weight 24 (Kg) Length 678 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥31 (Hz) Air consumption ≤66.7 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108(mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:58 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type Y24 Weight 24 (Kg) Length 604 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥27 (Hz) Air consumption ≤55 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Sell A515 Grade 60, A515 Grade65, A515 Grade70,vessel steel , steel plate, ASTM A515 A515 steel grade cover carbon-silicon steel plates primarily for intermediate-and higher-temperature service in welded boilers and other pressure vessels include A515 Grade 60, A515 Grade 65, A515 Grade 70, A515 Gr 60, A515 Gr 65, A515 Gr 70 , A515 Gr. 60, A515 Gr. 65, A515 Gr.70steel plate. 1. Steel Grade: A515 Grade 60, A515 Grade 65, A515 Grade 70, A515 Gr 60, A515 Gr 65, A515 Gr 70, A515 Gr. 60, A515 Gr. 65, A515 Gr.70 presser vessel steel plate. 2. Supply steel Size: Thickness: 8mm to 300mm Width: 1500mm to 4200mm Length: 4000mm to 18000mm 3. Adopt Standard: A 515/A 515M-03 4. Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical. 5. Delivery Time: 30-40days 6. Payment Item: 30% TT, or LC and TT. 7. Steel Services: Cutting, Painting, Ball blast, Pretreatment , and The third party inspection in DNV, BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick ship steel plate. Henan Gang Iron and Steel Co Ltd, is a largest agent of Wuyang mill in HBIS. xinyu iron and steel co.,ltd and Shougang group mill. We have many stock in ship steel plate stock in shanghai and Wuyang warehouse.As a professional global steel supplier, we promise we can offer you the qualified steel .Besides that, Gangsteel Boss is a manufacture manger, so we could promise the delivery time and the competitive price comparing with other company. If you have any confusion in steel price or technical conditions, please contact us freely. HENAN GANG IRON AND STEEL CO.,LTD Export Department: Ms. Rose MSN: gangsteel016@hotmail.com Skype: gangsteel016 Email: rose@gangsteel.com Telephone: 86-371-55698848 Fax: 86-371-88884766 Website: http://gangsteel.net/ http://www.gangsteel.com/

The new building material field guide green crusher low carbon much less than grate within the product was from slot machines, extra compared to anticipated gap grate within the obstruct once again from the grate within the effect and by Hammerhead grinding till much less than grate within the crevice was discharged. Hammer Breakers have broken than big nesting uniform particle size, the crush of small, minimal energy usage advantages. However, as Hammerhead put on faster, in tough products broken through the request of restrictions because of grate within the dread of one more plug, it is not advisable to make use of it with crushing humidity as nicely as the clay materials. this sort of breakers are typically applied to broken limestone, shale, coal, gypsum, Cretaceous and so tough from the pursuing brittle materials. Will the hammer crusher for that metal ring hammerhead for that ring machine, could be the hammer crusher variant. It utilizes high-speed and low-speed effect within the detailed part of RCC broken materials, which could be extra cautious services are generally applied for crushing coal for energy plants, but may also be applied for gypsum, salt, and some chemical compounds from the broken tough products . effect Crusher is to make use of the high-speed effect hammer plate as nicely as the plate counterattack rebound, permitting products by repeated shocks and broken machinery. Hammer good plate set up from the high-speed rotation within the rotor, and along the crushing chamber by a variety of completely different angles layout obstruct counterattack plate.alicey998 Hammer products in to the part of area board once the primary hammer through the board the primary time the original shock broken, and entry to power at exactly the same time, in to the high-speed counterattack plate. products and counterattack as shortly as once again broken plate collision, the hammer was bounced back again in to the part of area board, have been completely re-plate hammer blow. So once again and again, till they have been broken into as nicely as the necessary sizing within the discharge. Raymond Mill:http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html High-speed grinding rate was 100-120% within the vital speed, ball ratio is about 35%. Ball much less grinding proficiency is low; ball as well very much in operation once the internal ball is prone to interference, destruction within the usual cycle within the ball, grinding proficiency can also be reduced. Lattice-type ball mill ball charge of 40-45%; Overflow Ball Mill Ball charge of 35-40%. In short, on-site manufacturing ought to be centered ores and item needs to ascertain the ball rates. The above evaluation the fact that ball mill to pick the best ball charge should consider into account the rate within the equipment, we possess a basic answer for the trouble has long been plagued through the vast majority of mill users. The primary solutions of Henan prosperous appliance production: the ball mill, energy-saving ball mill, cement mill, intermittent ball mill, tube mill, grid ball mill, explosion-proof ball mill, disc granulator, pendulum feeding machine, mixing drum, drum sieve large volume sieve, flotation machine, shaker, grading machines, rotary kiln, magnetic separator, dryer as properly as other heavy machinery and equipment, purchase. Dry Equipment:http://www.xingbangmills.com/Mineral_processing_equipment/Dry-Equipment.html Jaw crusher:http://www.china-xingbang.com jaw crusher:http://www.xb-machine.com Jaw Crusher:http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html

Jaw crusher to change the slag processing mode Xingbang mill to improve the lubrication station control system to improve the operating efficiency of the mill of the mineral processing equipment lubrication station control system directly affect the normal operation of the high pressure pump, thus improving the lubrication station control system is very helpful to improve the efficiency of mill operations, Hing The state mill to improve the lubrication station control system to improve operating efficiency.Ball mill lubrication station control system is good or bad a direct impact on the efficiency of the machine, prosperous machine for mill improvements made to the diluted oil station in the Central Plains through the detection pump pressure to control the working status, gas stations equipped with three pressure gauges, for the pump pressure, filter pressure, fuel pressure. Supply pressure from the electric contact pressure gauge testing, the general control of the 0.2 ~ 0.4MPa. When the oil pressure less than 0.2MPa 2 pump oil; stop the oil pressure greater than 0.4MPa 1 oil pump, oil pump oil by 1.As the size of the flow is a direct reflection of the working conditions of the petrol station. Pressure changes can only indirectly reflect the flow changes, the flow does not necessarily increase the pressure increases, the control flow is the most direct and effective. Especially in the winter the temperature changes due to downtime and operation, each time when the start of the wet ball mill should adjust the valve so that the supply pressure 0.2 ~ 0.4MPa, but is also growing with the growth of the running time of lubricating oil temperature, viscosity declining, along with the pressure reduced. Raymond Mill:http://www.xb-machine.com/Ball_mill/Raymond-Mill.html Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html using the hammer crusher in comparison counterattack Breakers higher compared to broken, and to produce fuller use within the high-speed rotor effect energy. However, as quickly put on plate hammer it tough from the utilization of broken product is restricted, typically applied to difficult broken, broken or minor limestone, coal, lime scale carbide, quartz, dolomite, sulphide metal ore, gypsum and substance raw products from the following, and so tough brittle materials.Typically, the jaw crusher according towards the functioning basic principle of the long-term follow-up questionnaire and buyer information could be summarized: jaw crusher effect the effectiveness within the primary elements from the nip angle as nicely as the crusher jaw crusher rpmNip angle is repaired jaw plate and repaired angle in between the jaw, based on estimates within the angle of as significantly as 32 degrees, and from the genuine style and design is frequently applied in much less than 25 degrees, the fundamental for 18 to twenty degrees simply because the rodents angle is as well large, it will make the ore crushing chamber by which too much force and even out within the collision up and also threatened the private security of personnel or harm to other equipment; and using the nip angle increases, the decline ratio to improve at exactly the same time, efficiency decline. Adjust the sizing of discharge port (port of discharge by adjusting the obstruct sizing could be adjusted), the sizing within the nip angle change. In genuine production, generally centered around the specifications of discharge to adjust the sizing of discharge port size. Therefore, to be sure the fact that specifications of particle size, as much since the port of discharge amplification is reasonable. However, be aware the fact that port of discharge from the regulation of sizing and efficiency broken than to be aware the interaction in between the in the specific range, could be transferred by escalating the quantity of eccentric shafts to improve the manufacturing ability of crusher, however the rate is enhanced at exactly the same time the product will improve the crushing device power consumption. And when the rate is as well large, would have been completely broken from the crushing chamber as well past due to exhaust the ore created jams, but will decrease the manufacturing ability of cement manufacturing equipment. Therefore, the jaw crusher has a variety of revolutions is the most beneficial threshold.Exhibition of Machinery to remind you: Jaw crusher putting on components that include eccentric shaft, connecting rod, movable jaw plate as nicely as the liner and so have to spend interest to lubrication and replacement. Strengthen the jaw crusher broken board lifetime from style and design selection, assembly, make utilization of the procedure advancement elements that include nicely to strengthen the broken jaw broken board lifetime, jaw crusher to enhance manufacturing efficiency, decrease manufacturing expenses .Cement mill upkeep can be an very imperative frequent function , it ought to be match up closely using the appliance operation and upkeep , there ought to be full-time personnel on duty checks.Bearing . Dry Equipment:http://www.xingbangmills.com/Mineral_processing_equipment/Dry-Equipment.html Jaw crusher:http://www.china-xingbang.com jaw crusher:http://www.xb-machine.com Jaw Crusher:http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html

Ceramic (Ferrite) magnets are composed of strontium carbonate and iron oxide. They are charcoal gray in color and usually we saw different sharp of ceramic(ferrite) magnets:discs ferrite magnets, rings ferrite magnets, blocks ceramic magnets, cylinders ferrite magnets, and sometimes arcs ferrite magnets for motors. Ceramic (Ferrite) magnets are chemical compounds consisting of ceramic materials with iron(III) oxide (Fe2O3) as their principal component. Many of them are magnetic materials and they are used to make permanent magnets, ferrite cores for transformers, and in various other applications.Ferrites are, like most other ceramics, hard and brittle. In terms of the magnetic properties, ferrites are often classified as "soft Ceramic (Ferrite) magnets" and "hard Ceramic (Ferrite) magnets" which refers to their low or high coercivity of their magnetism, respectively. If you have the requirement of Ceramic(Ferrite)magnets, Pls contact us feel free, and we'll provide you detail docs and resonable price!

Alnico magnets are made primarily from aluminum,nickel,cobalt,copper,iron and sometimes titanium.They can be either cast or sintered and be applied widely in our daily life.They have stable temperature coefficient and great for heat applications.The working temperature can reach 550-600 celsius degrees.The common grade is AlNiCo 5 and AiNiCo 8. Properties: LN9, LN10, LNG12, LNG13, LNG37, LNG40, LNG44, LNG52, LNG60, LNGT28, LNGT36J, LNGT18, LNGT32, LNGT40, LNGT60, and LNGT72 (China standard) Alnico2, Alnico3, Alnico5, Alnico5DG, Alnico5-7, Alnico6, Alnico8HC, Alnico8, and Alnico9 (the US standard) The specification(dimension) of Alnico magnet can be customized according to client's requests and design.

Description: The magnetic lifters have the features of strong attraction, smaller volume , lighter weight, powerful lifting effort , easy and safe to operate, long-period effort and without power supply. Magnetic lifters are been used to lift and transport the steel and iron for factories, docks, ware houses, transportation etc. The magnetic lifters can hoist iron, steel blocks, cylinder and others and provide a quick and convenient method of loading, unloading,and moving. Features: 1. On and off of the magnetic path is controlled by turning the manual handle 2. Use to lift, transport steel and iron for factories, docks, warehouses, transportation and more. 3. Turning the manual handle activates or turns off the magnet. 4. Strong attraction gives this tool a powerful lifting ability while it’s small size and light weight makes it easy and safe to operate. Effective for long periods with no need for a power supply.

we have 1\2\3\4\5\6 ton mini truck 《《cimcyuanling@gmail.com》》 1、Emission∶Euro 1/Euro 2/Euro 3.diesel. 2、load capacity∶0-2.5T，3T，4T，5T，6T 3、truck's chassis made by ourselves 4、optional color and configuration Model ZTP1052W Type Single Cab cargo truck Driving type LHD/RHD Overall dimension (mm) Length 5960 Width 2080 Height 2200 Wheelbase (mm) 3308 Tread (mm) 1680 (front), 1485 (rear) Ground clearance (mm) 185 Cargo deck (inside) (mm) Length 4180 Width 1980 Height 390 Curb vehicle weight (kg) 2505 Gross vehicle weight (kg) 6200 Payload (kg) 3500 ENGINE Model YZ4105QF CY4102BZQ CY4100ZLQ 4100QBZL YCD4B32-116 CY4102BZLQ YCD4C32-126 SOFIM8140.43S Type Diesel, 4-cylinder, in line, water □ cooled, direct injection Diesel, 4-cylinder, in line, water □ cooled, direct injection,turbocharged Diesel, 4-cylinder, in line, water □ cooled, direct injection, turbocharged, intercooler Bore & stroke (mm) 105X118 102X118 100X118 100X105 95X105 102X118 100X120 94.4X100 Displacement (cc) 4087 3856 3707 3298 2977 3856 3770 2798 Max. power (kw/rpm) 75/3200 88/2800 81/2900 81/3200 85/3200 88/2800 93/2800 90/3600 Max. torque (N.m/rpm) 260/2200 324/1800 320/1500 285/2000-2200 325/2100 343/2200 355/1800 285/1800 Emission Euro Ⅰ Euro Ⅰ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅲ Fuel tank capacity (L) 80 Model LC5T97 LC5T30 LC5T35 IVECO 2826.5 Speed 5 Gear ratio 「 1 □ 5 (6) R」 5.788,2.988,1.735,1.000,0.818,5.086 4.776,2.469,1.479,1.000,0.778,4.774 4.936,2.561,1.518,1.000,0.783,4.816 6.195,3.895 , 2.260,1.430,1.000 , 5.690 Front “ I ” type beam axle Rear Double curve cone of gear, single-stage deceleration, pipa type Brake system Service brake Duel circuit hydraulic brake Parking brake Style of central drum

Main technique target of Air Separation Plant-Oxygen plant-Nitrogen Plant: Products Capacity (m3/hr) Purity (%) Pressure (Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment of Air Separation Plant-Oxygen plant-Nitrogen Plant: 1.Air compressor 2. Air tank 3.Precision filter 4.Air pre-cooling system 5.Water separator 6.Molecular sieve purification system 7.Heater or molecular sieve purification system 8.Rectification column 9.Heater or the rectification column 10.Gas bearing turbo-expander 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air Separation Plant-Oxygen plant-Nitrogen Plant: * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of <GB8982-1998> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security:The outside compression process is oxygen be compressed atroom temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability: liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our nylon fishing line and monofilament line products are: Nylon fishing line: 0.10-2.00mm, Nylon mono line/nylon trimmer line: 2.0-5.0mm, Packing: 2 X 25yds/hank, 100m/hank, 1000m/hank, 100/reel, 200m/reel, 100g/reel, 1kgs/reel. The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co.,Ltd. Tel: 0086-898-66751333, 66751999, Fax: 66781345 No.11 Xisha road., Haikou, China. E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our nylon fishing line and monofilament line products are: Nylon fishing line: 0.10-2.00mm, Nylon mono line/nylon trimmer line: 2.0-5.0mm, Packing: 2 X 25yds/hank, 100m/hank, 1000m/hank, 100/reel, 200m/reel, 100g/reel, 1kgs/reel. The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co.,Ltd. Tel: 0086-898-66751333, 66751999, Fax: 66781345 No.11 Xisha road., Haikou, China. E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope, sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our twine products are: 1.Twine ( on spool or in hank ): Nylon multi twine: 210d/2- 120ply, Polypropylene multi twine: 210d/2- 120ply, Polyethylene twine: 380d/ 2- 120 ply. 2. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes, L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our nylon fishing line and monofilament line products are: Nylon fishing line: 0.10-2.00mm, Nylon mono line/nylon trimmer line: 2.0-5.0mm, Packing: 2 X 25yds/hank, 100m/hank, 1000m/hank, 100/reel, 200m/reel, 100g/reel, 1kgs/reel. The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co.,Ltd. Tel: 0086-898-66751333, 66751999, Fax: 66781345 No.11 Xisha road., Haikou, China. E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope, sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our twine products are: 1.Twine ( on spool or in hank ): Nylon multi twine: 210d/2- 120ply, Polypropylene multi twine: 210d/2- 120ply, Polyethylene twine: 380d/ 2- 120 ply. 2. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes, L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope, sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our fishing float products are: PVC floats: all kinds of pvc floats in our web site, ABS floats: diam: 120,140,160,180,200,220,280,300mm, EVA floats: SHE-20. SHE-6. SS-5. The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope, sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our fishing float products are: PVC floats: all kinds of pvc floats in our web site, ABS floats: diam: 120,140,160,180,200,220,280,300mm, EVA floats: SHE-20. SHE-6. SS-5. The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope, sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our twine products are: 1.Twine ( on spool or in hank ): Nylon multi twine: 210d/2- 120ply, Polypropylene multi twine: 210d/2- 120ply, Polyethylene twine: 380d/ 2- 120 ply. 2. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes, L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Dear Sir or Madam: We are a specilized manufacturer and exporter of pe rope, pp rope, nylon rope, polyester rope,water ski rope,sisal rope, nylon twine, pe twine, pp twine, sisal twine, sisal cloth, nylon fishing line, nylon mono line, nylon trimmer line, abs fishing float, pvc fishing float,eva fishing float and other products. Our products have been exported to more than 60 countries and other areas with our good quality and competitive price. Our rope products are: 1. Braided rope, 8 ply, 12 ply and 16 ply, Braided rope of nylon / polyester / polypropylene: 1mm to 24mm, Polyethylene braided rope : 2mm - 24mm. 2. Twist rope. 3 strands or 4 strands, Made by nylon / polyester / polypropylene / polyethylene: 2mm to 60mm. 3. Water Ski Rope, Length: 23m, diam: 7.5mm, Color: Blue, Yellow and so on. 4. Sisal products: A)Sisal ropes, 3 or 4 strands, diam: 6-42mm, B)Sisal twine: 2 or 3 ply. 2.0mm-5.0mm, C)Sisal cloth: 1.30m-1.50m (width). The quality of our products is the best one in China. please contact us by e-mail: fishing@china-fishing.net. if you like to know more information of our products from us. Best Wishes L.xin -------------------- Hainan Shanli Enterprise (Trading) Co., Ltd No.11 Xisha road., Haikou, China. Tel: 0086-898-66751333, 66751999, Fax: 66781345 E-mail: fishing@china-fishing.net. http://www.china-fishing.net.

Semi-automatic liquid filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Principles and characteristics of A, DY series of semi-automatic piston filler filling machine. Drive a piston through the cylinder to extract and play materials, using one-way valve controls the flow of materials and in magnetic reed switch control cylinder line Process, you can adjust the amount of filling. B, machine design is reasonable, model compact, convenient operation, pneumatic part of Germany FESTO and Taiwan are used AirTac pneumatic components. C, material contact parts are used 316L stainless steel material, meet the GMP requirements. D, filling volume and filling speed can be arbitrarily adjusted, filling and high accuracy. E, filling and lifting, focusing instead on use of anti-drip filling device Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

semi-automatic quantitative filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Main purpose of the filler can be used in lubricating oil, cooking oil and other oil filling. Specifications Filling speed 200-350bottles/hour Accuracy ± ≤ 0.5% FS Power Supply 220/380V Air Pressure 0.5-0.7Mpa Filling head 2 Principle features of digital display Two-speed control technology linear filling filling filling valve anti-drip stainless steel A, the model filling machine design is reasonable, model compact, easy to operate the piston and the cylinder cylinder are made of PTFE and stainless steel materials, filling volume and filling speed can be arbitrarily adjusted, filling high precision; B, filling, focusing instead on use of anti-drip, anti-filling drawing and lifting devices, can be applied to in the lubricating oil, edible oil and other oil filling. Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

KLG filling machine xunjie11dtjy Filling Machine Product Description; Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Machine name KLG filling machine filling range(50-500ml) Main use; The filling machine for medicine, daily chemical, food, pesticide and special trades, is an ideal particle slurry viscosity fluid filling equipment. Specifications Filling speed 10-30 bottles / min Filling accuracy≤± 1% Power 220/110V 50/60Hz Air pressure 0.4-0.6Mpa Principle Features A, KLG particle paste filling machine is our company's advanced technology, based on the filling machine to carry out reform and innovation in product design, simple structure, high precision and more convenient. B, machine for semi-automatic piston filler may be particulate slurry fluid filling material. C, machine design is reasonable, compact model, vertical structure, saving space, easy to operate. D, pneumatic part made of Germany FESTO and Taiwan AirTac pneumatic components. E, material contact parts are used 316L stainless steel material, meet the GMP requirements. F, filling valve by the pneumatic valve control, filling more accurate. G, filling volume and filling speed can be adjusted arbitrarily. H, filling, focusing instead on drawing and the use of anti-lift filling device. Note; jams, sauces, peanut butter, tomato sauce, sauces, bean paste, chili sauce, shrimp paste, applesauce, salad dressings, caviar, sauce may fill. Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

Automatic Liquid Filling Machine Filling Machine Product Description; xunjie11dtjyOur company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Main use The filling machine widely used in daily chemical, food, grease and other industries, may be filling different liquid products. Specifications Filling speed 60-100 bottles / min Filling accuracy ≤± 1% Current 3A Power 220/110V 50/60Hz Power 500W Air pressure 0.4-0.6MPa Optional Model 5-60ml 10-125ml 25-250ml 50-500ml 100-1000ml 250-2500ml 500-5000ml Principle Features A, RG6T-6G filling machine in reference to similar products on the basis of improved design and added some additional functionality. B, so that the use of the product operation, accuracy error, installed capacity adjustment, equipment cleaning, maintenance, etc. is more easy and convenient. C, compact machine design is reasonable, simple and beautiful appearance, filling volume adjustment easily. D, there are six filling machine head, driven by six cylinder, filling materials more quickly and accurately. E, using German FESTO, Taiwan AirTac pneumatic components and Taiwan's electrical control parts, and stable performance. F, material contact parts are used 316L stainless steel materials. G, filling machine with South Korea-ray eyes, Taiwan's PLC touch screen, inverter and the French electrical components. H, regulating facilities, no bottle no filling, filling the amount of accurate and has a count function. I, with anti-drip and drawing, focusing instead on the filling, anti-foam products, filling high-lift system to ensure that bottle positioning positioning system and liquid level control system Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.comWebsite: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China