1. Technology parameters *variety: 300―1200g/m2 gray paper *degree of drying: 90%above *working linear pressure: 90KN/m *working speed: 450m/min *net paper width: 5700mm *track gauge: 7150mm 2.Performance advantages and characteristics *Finishing,keep the paper surface bright,clean and smooth,at the same time keep the thickness of paper; *Revise the sickness of paper,keep the paper even tightnese *Top roller device:diameter:930X6000 hollow roller;material:high nickel chrome molybdenum alloy,chilled cast iron,centrifugal casting,surface hardness of roller≥HS72° hsrdness difference4~6° , sickness of chilling layer 20―30mm,the sickness of roller 200mm.

Main technique target of Air separation plant Products Capacity(m3/hr)Purity(%) Pressure(Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8% 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment ofAir separation plant 1. Air compressor 2. Air tank 3. Precision filter 4. Pre-cooler 5. Water separator 6. Purifier 7. Heater of Purifier 8. Rectification column 9. Heater of the rectification column 10.Expansion Turbine 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air separation plant * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of GB8982-1998<medical oxygen> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security _ The outside compression process is oxygen be compressed at room temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability - liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Summary ∶ Technical specifications Type Y26 Weight 26 (Kg) Length 650 (mm) Cylinder dia φ65 (mm) Piston stroke 70 (mm) Working pressure 0.4 (Mpa) Impact energy ≥30 (J) Impact frequency ≥23 (Hz) Air consumption ≤47 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type YT24 Weight 24 (Kg) Length 678 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥31 (Hz) Air consumption ≤66.7 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108(mm)

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:5 8 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Advantages: Needless to replace the internals of the engine head,just handle the handle to operate it. Easy to operate.More time-saving and effortless.Drilling faster and more efficient. Have reached the Tip-top level of the same field now,and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling,splitting breaking, ramming, shovelling. And widely used in mining,road-construction, quarrying and national defense construction,etc. TECHNICAL SPECIFICATIONS 1.Weight of the main machine: 27kg 2.Overall dimension: 746×315× 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter×Stroke of piston:58 × 70mm 5. Rotating speed of engine: ≥2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ≥ 250mm /min 10. Max. drilling depth: ≥ 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:≥ 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 × 108mm 15. Rotating speed of drill rod:≥200r/min 16. Clearance of Spark plug :0.5 -0.7mm

Summary ∶ Technical specifications Type Y24 Weight 24 (Kg) Length 604 (mm) Cylinder dia φ70 (mm) Piston stroke 70 (mm) Working pressure 0.4~0.5 (Mpa) Impact energy 44.7 (J) Impact frequency ≥27 (Hz) Air consumption ≤55 (L/s) Working water pressure 0.2~0.3 (Mpa) Air pipe inner dia φ19 (mm) Water pipe inner dia φ13 (mm) Rock drill hole dia φ34~φ42 (mm) Rock drill hole depth 5 (m) Shank size 22×108 (mm)

Ceramic (Ferrite) magnets are composed of strontium carbonate and iron oxide. They are charcoal gray in color and usually we saw different sharp of ceramic(ferrite) magnets:discs ferrite magnets, rings ferrite magnets, blocks ceramic magnets, cylinders ferrite magnets, and sometimes arcs ferrite magnets for motors. Ceramic (Ferrite) magnets are chemical compounds consisting of ceramic materials with iron(III) oxide (Fe2O3) as their principal component. Many of them are magnetic materials and they are used to make permanent magnets, ferrite cores for transformers, and in various other applications.Ferrites are, like most other ceramics, hard and brittle. In terms of the magnetic properties, ferrites are often classified as "soft Ceramic (Ferrite) magnets" and "hard Ceramic (Ferrite) magnets" which refers to their low or high coercivity of their magnetism, respectively. If you have the requirement of Ceramic(Ferrite)magnets, Pls contact us feel free, and we'll provide you detail docs and resonable price!

Description: The magnetic lifters have the features of strong attraction, smaller volume , lighter weight, powerful lifting effort , easy and safe to operate, long-period effort and without power supply. Magnetic lifters are been used to lift and transport the steel and iron for factories, docks, ware houses, transportation etc. The magnetic lifters can hoist iron, steel blocks, cylinder and others and provide a quick and convenient method of loading, unloading,and moving. Features: 1. On and off of the magnetic path is controlled by turning the manual handle 2. Use to lift, transport steel and iron for factories, docks, warehouses, transportation and more. 3. Turning the manual handle activates or turns off the magnet. 4. Strong attraction gives this tool a powerful lifting ability while it’s small size and light weight makes it easy and safe to operate. Effective for long periods with no need for a power supply.

we have 1\2\3\4\5\6 ton mini truck 《《cimcyuanling@gmail.com》》 1、Emission∶Euro 1/Euro 2/Euro 3.diesel. 2、load capacity∶0-2.5T，3T，4T，5T，6T 3、truck's chassis made by ourselves 4、optional color and configuration Model ZTP1052W Type Single Cab cargo truck Driving type LHD/RHD Overall dimension (mm) Length 5960 Width 2080 Height 2200 Wheelbase (mm) 3308 Tread (mm) 1680 (front), 1485 (rear) Ground clearance (mm) 185 Cargo deck (inside) (mm) Length 4180 Width 1980 Height 390 Curb vehicle weight (kg) 2505 Gross vehicle weight (kg) 6200 Payload (kg) 3500 ENGINE Model YZ4105QF CY4102BZQ CY4100ZLQ 4100QBZL YCD4B32-116 CY4102BZLQ YCD4C32-126 SOFIM8140.43S Type Diesel, 4-cylinder, in line, water □ cooled, direct injection Diesel, 4-cylinder, in line, water □ cooled, direct injection,turbocharged Diesel, 4-cylinder, in line, water □ cooled, direct injection, turbocharged, intercooler Bore & stroke (mm) 105X118 102X118 100X118 100X105 95X105 102X118 100X120 94.4X100 Displacement (cc) 4087 3856 3707 3298 2977 3856 3770 2798 Max. power (kw/rpm) 75/3200 88/2800 81/2900 81/3200 85/3200 88/2800 93/2800 90/3600 Max. torque (N.m/rpm) 260/2200 324/1800 320/1500 285/2000-2200 325/2100 343/2200 355/1800 285/1800 Emission Euro Ⅰ Euro Ⅰ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅱ Euro Ⅲ Fuel tank capacity (L) 80 Model LC5T97 LC5T30 LC5T35 IVECO 2826.5 Speed 5 Gear ratio 「 1 □ 5 (6) R」 5.788,2.988,1.735,1.000,0.818,5.086 4.776,2.469,1.479,1.000,0.778,4.774 4.936,2.561,1.518,1.000,0.783,4.816 6.195,3.895 , 2.260,1.430,1.000 , 5.690 Front “ I ” type beam axle Rear Double curve cone of gear, single-stage deceleration, pipa type Brake system Service brake Duel circuit hydraulic brake Parking brake Style of central drum

Main technique target of Air Separation Plant-Oxygen plant-Nitrogen Plant: Products Capacity (m3/hr) Purity (%) Pressure (Mpa) Oxygen 50-2000 99.6-99.8 0.25-22 Liquid Oxygen Right amount 99.6-99.8 0.25 Nitrogen 50-3000 99.99-99.999 0.5-22 Liquid Nitrogen Right amount 99.99-99.999 0.5-1.1 We can provide the special designs as the user requires. Main equipment of Air Separation Plant-Oxygen plant-Nitrogen Plant: 1.Air compressor 2. Air tank 3.Precision filter 4.Air pre-cooling system 5.Water separator 6.Molecular sieve purification system 7.Heater or molecular sieve purification system 8.Rectification column 9.Heater or the rectification column 10.Gas bearing turbo-expander 11.Liquid Oxygen Pump 12.Filling device 13.Electrical & instrument control system 14.Liquid storage tanks 15.Gas cylinders, etc Main Features of Air Separation Plant-Oxygen plant-Nitrogen Plant: * This development and design of flow is new, my company use the technology to mature. * Simple operation, convenient maintenance, starting time is short, unit power consumption is low. * Oxygen of high purity and very stable, meet and exceed technical indicators of <GB8982-1998> * Use of air cooling equipment, do not need cooling water, adaptable, saving the cost. *Security:The outside compression process is oxygen be compressed atroom temperature, The inside compression process is liquid oxygen be compressed at low temperature, Security than more with the inside compression process; Extraction a lot of liquid oxygen from evaporation-condenser, To ensure that no accumulation of hydrocarbons; Evaporation of high pressure with liquid oxygen, reducing the possibility of hydrocarbon accumulation; Reducing fire hazards. * Reliability: liquid oxygen pump excellent performance, easy to maintain; Booster compressor is one or two compression, oxygen compressor Booster compressor is three or five compression, High reliability with booster compressor. E-mail:info@hzuig.com MSN:sizhairen@hotmail.com

Eco-solvent direct printing ink Our direct eco-solvent ink ensures great performance with a large variety of media, vivid color, low cost, strong adhesion to any kind of media and high speed printing without interruptions. It can fulfill print on many materials directly without coating and the effect is perfect. Our white ink (textiles white ink ; eco-solvent white ink) is perfect for printing black materials. The fluency is good and perfect covering black background. Features: 1. Can be print directly in any material without the help of any coating and realize perfect fastness and gorgeous color 2. Can print out the perfect design in hard, bright and clean materials such as glass, ceramics, etc., but need to use coating to keep good fastness. 3. Perfect fluency performance. The test in the piezoelectric nozzle shows that it can keep the good fluidity none use in one month. 4. In high-speed printing, ink won’t appear broke 5. Print bright color, the color restoration is good 6. can print directly in PVC, acrylic, plastic, leather, metal, ABS, CD/DVD, board, etc. Application: The ink can print directly on all kinds of materials, applicable to metal, wood, VCD, plastic, acrylic, ABS, rubber, PVC, PC, aluminum, stainless steel, stone, silica gel and all kinds of paint surface. Test results: in 48 hours continuous printing ink, won't appear break phenomenon.Using this ink，the service life of piezoelectric nozzle print head is as long as 18 months . Superior fluency,it keeps the fluidity of the record for 15 days no printing work in the in the piezoelectric nozzle This is an advantage of the solvent ink field. The most precious is the ink flowability is very good, Won't appear broken ink when high-speed printing, vivid color and the color reduction is good. Advantages compared with the similar product: 1. fluent superior performance, high speed print won't appear color weak; Because the ink has perfect fluency, reduce the nozzle maintenance time. 2. color restoration is real, color is gorgeous. 3. Print directly on any material, without coating and extra after treatment. Realize perfect fastness. □ Eco-solvent color direct ink-Haiwn-RT6/RT8 It can be used widely for almost all kinds of rigid printing materials such as plastics, acrylic, wood, stone, aluminum, metal, PVC, PC (Polycarbonate), ABS, AS, leather, ceramic and even glass for direct printing without any pre-coating. The good points of the ink are wide printing material applications, vivid color gamut and fast drying time HAIWN-RT6 RT8 Product name: HAIWN-Rt6 Eco-solvent color ink(6 color) product Numbers: HAIWN-RT6 service life: 24 months color: K, C, M, Y, LC, LM suitable model: EPSON STYLUS PHOTO 1290, 1390, R230, R250 & R270 packing: 1000 ml，2000 ml，5000 ml save: Airtight, avoid light, placed in 5-25 degrees Product name: HAIWN-Rt8 Eco-solvent color ink (8 color) a) product Numbers: HAIWN-RT8 b) service life: 24 months c) color: Photo Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta, Light Black, Light Light Black, Gloss d) suitable model: EPSON STYLUS PHOTO R800, R1800, R1900, R4800, R2400, R2880 & PRO 9800 e) packing: 1000 ml，2000 ml，5000 ml f) save: Airtight, avoid light, placed in 5-25 degrees

Application: ZY Single stage transformer oil recycling plant is a efficiency vacuum insulating oil recycling system. It can remove water; trace water, gas, particles from oil quickly, improving oil dielectric strength. Mainly for the power station, industrial and mining enterprises purifying the unqualified transformer oil, mutual inductor oil, switch oil and so on. Also, this oil purifier can be used to power equipments to vacuum drying, and vacuum oiling. Features: 1. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 2. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 3. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 4. Working with BZ insulating oil regeneration device to decolor (remove acid, oxide, free carbon) and lower dielectric loss, making the treated oil more limpidity. Contact: Rainna Email/ MSN: oilrecyclingh@hotmail.com Yahoo: oilpurifierrainna@yahoo.com Skype: oilpurifiernk Google Talk: rainnaoilpurifier@gmail.com Fax: +86 23 68089506 Mobile: +8615683907367 Website: http://www.nkoilrecycling.com/ http://www.tradett.com/companies/u970196 http://www.allproducts.com/manufacture96/oilrecyclingh http://oilrecyclingh.en.china.cn http://oilrecyclingh.en.ec21.com http://oilrecyclingh.diytrade.com http://www.tradevv.com/chinasuppliers/oilrecyclingh http://www.ecvv.com/company/oilrecyclingh/index.html http://www.worldoftrade.com/mem_home/32033426800/chongqing-nakin-oil-recycling-co-ltd-.htm http://oilrecyclingh.sugoo.com/ http://oilrecyclingh.bossgoo.com/ http://c615888.tootoo.com/ http://www.ec51.com/oilrecyclingh/ If you are interested in our oil purifier machines, please do not hesitate to contact us, we will provide you the complete technical support.

Application: AD air dryer equipment is special designed for drying the electric equipments such as transformer, power station, reactor etc. it mainly provide the dry air. As transformer and reactor, are quite easy to be moistened, AD air dryer supplies dry air to solve this problem, anoxia asphyxia will never happen to maintenance people. It’s more safe, reliable, convenient and economical than by using bottled gas. Features: 1.Not influenced by bad weather conditions, especially for overnight working 2.Can shorten working period and improve maintenance effect. 3.During oil filtration, it can fill dry air into oil equipment block and oil to improve oil insulation function and decrease the moisture. 4.AD air dryer adopts low pressure oil-less compressed system and low-temperature condensation moisture removal technology,. 5.Small dimension, light weight, easy operation, energy saving and high reliability. Contact: Rainna Email/ MSN: oilrecyclingh@hotmail.com Yahoo: oilpurifierrainna@yahoo.com Skype: oilpurifiernk Google Talk: rainnaoilpurifier@gmail.com Fax: +86 23 68089506 Mobile: +8615683907367 Website: http://www.nkoilrecycling.com/ http://www.tradett.com/companies/u970196 http://www.allproducts.com/manufacture96/oilrecyclingh http://oilrecyclingh.en.china.cn http://oilrecyclingh.en.ec21.com http://oilrecyclingh.diytrade.com http://www.tradevv.com/chinasuppliers/oilrecyclingh http://www.ecvv.com/company/oilrecyclingh/index.html http://www.worldoftrade.com/mem_home/32033426800/chongqing-nakin-oil-recycling-co-ltd-.htm http://oilrecyclingh.sugoo.com/ http://oilrecyclingh.bossgoo.com/ http://c615888.tootoo.com/ http://www.ec51.com/oilrecyclingh/ If you are interested in our oil purifier machines, please do not hesitate to contact us, we will provide you the complete technical support.

Semi-automatic liquid filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Principles and characteristics of A, DY series of semi-automatic piston filler filling machine. Drive a piston through the cylinder to extract and play materials, using one-way valve controls the flow of materials and in magnetic reed switch control cylinder line Process, you can adjust the amount of filling. B, machine design is reasonable, model compact, convenient operation, pneumatic part of Germany FESTO and Taiwan are used AirTac pneumatic components. C, material contact parts are used 316L stainless steel material, meet the GMP requirements. D, filling volume and filling speed can be arbitrarily adjusted, filling and high accuracy. E, filling and lifting, focusing instead on use of anti-drip filling device Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

semi-automatic quantitative filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Main purpose of the filler can be used in lubricating oil, cooking oil and other oil filling. Specifications Filling speed 200-350bottles/hour Accuracy ± ≤ 0.5% FS Power Supply 220/380V Air Pressure 0.5-0.7Mpa Filling head 2 Principle features of digital display Two-speed control technology linear filling filling filling valve anti-drip stainless steel A, the model filling machine design is reasonable, model compact, easy to operate the piston and the cylinder cylinder are made of PTFE and stainless steel materials, filling volume and filling speed can be arbitrarily adjusted, filling high precision; B, filling, focusing instead on use of anti-drip, anti-filling drawing and lifting devices, can be applied to in the lubricating oil, edible oil and other oil filling. Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

Automatic Liquid Filling Machine Filling Machine Product Description; xunjie11dtjyOur company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect. Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Main use The filling machine widely used in daily chemical, food, grease and other industries, may be filling different liquid products. Specifications Filling speed 60-100 bottles / min Filling accuracy ≤± 1% Current 3A Power 220/110V 50/60Hz Power 500W Air pressure 0.4-0.6MPa Optional Model 5-60ml 10-125ml 25-250ml 50-500ml 100-1000ml 250-2500ml 500-5000ml Principle Features A, RG6T-6G filling machine in reference to similar products on the basis of improved design and added some additional functionality. B, so that the use of the product operation, accuracy error, installed capacity adjustment, equipment cleaning, maintenance, etc. is more easy and convenient. C, compact machine design is reasonable, simple and beautiful appearance, filling volume adjustment easily. D, there are six filling machine head, driven by six cylinder, filling materials more quickly and accurately. E, using German FESTO, Taiwan AirTac pneumatic components and Taiwan's electrical control parts, and stable performance. F, material contact parts are used 316L stainless steel materials. G, filling machine with South Korea-ray eyes, Taiwan's PLC touch screen, inverter and the French electrical components. H, regulating facilities, no bottle no filling, filling the amount of accurate and has a count function. I, with anti-drip and drawing, focusing instead on the filling, anti-foam products, filling high-lift system to ensure that bottle positioning positioning system and liquid level control system Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.comWebsite: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

The Insulating Glass is the combination of two or more pieces of glass after second glue. The intermediate layer of the Insulating Glass is full of drying air or other kind of gas. The Insulating Glass can reduce the heat transfer then the expense of air-conditioner and energy consumption is saved accordingly. It’s sound proofing feature can improve the room amenity

Electro Galvanized Wire Electro Galvanized Wire is also known as electric galvanized iron wire or galvanized steel wire. Electric galvanized wire at diameter ranging from 0.14mm to 5.0mm, which can be supplied in the form of coils, spools, U type wire or straightened and cut into tie wire. Electric Galvanized Iron Wire we produce usually goes through standard processes under careful control from steel rod coil, wire drawing, annealing, rust removing, acid washing, boiling, drying, zinc feeding to wire coiling. Wire Diameter of Electro Galvanized Iron Wire: 0.14mm - 5.0mm. Zinc coating for Electro Galvanized Iron Wire: about 8gram to 12gram. Production Process of Electro Galvanized Iron Wire: Steel rod coil -- Wire Drawing -- Wire Annealing--Rust Removing-- Acid Washing-- Boiling-- Drying-- Zinc Feeding-- Wire Coiling.

Development of energy-saving ball mill more potential-peony1701 Has two varieties of Grid and overflow. grinding mineral lattice sizing restrict is normally 0.2 ~ 0.3mm, so typical inside the primary paragraph from the grinding and grading businesses are typically linked to spiral right into a closed loop. Overflow ball mill grinding mineral particle sizing normally much less than 0.2mm, it is utilized to two grinding processes inside the next intermediate re-grinding mill. Grid Ball Mill could be discharged skilled products, to decrease the ore via crushing, grinding greater capability models to cope with compared to sizing from the overflow-type ball mill using a higher close to 15% of ball more. once the particle sizing to 48 to 65 must put on the objective of uniform product, the selection of lattice-type ball better. Concentrator according for the desires of grinding grain selection. .shanghai zenith could be the greatest in China. Welcome to travel to and order. Our ball mill plant has become practiced amid a whole lot of international nations inside the world, for example Chile, Turkey, Zambia, and so on. Safety, fastness, and greatest top quality are our aim. Shanghai Zenith Machinery is searching forward to cooperate with you. The Ball mill has two methods of grinding: dried out procedure and wet process.Ball Mill is extensively utilized in cement industry, substance industry, new developing materials, fire-resistant materials, fertilizer, porcelain and frosted glass marketplace etc. The Ball mill has two methods of grinding: dried out procedure and wet process. silicate products, new developing resources , refractory resources , fertilizer, ore dressing , and dark frosted glass ceramic as properly as other non-ferrous steel manufacturing industries, as properly as other different ore grindability of resources to the dried out and wet grinding.We are committed to designing, generating mills,,crushers,ball mills,conveyors,s,feeding machines,drying and acclimating in add-on to beneficiation equipments and etc. Our services were spreader all more than China,and also exported to European,American,Asian and African countries. ball mill:http://www.xb-machine.com ball mill:http://www.xingbangmills.com Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html

The reasons for selling the world of cement mill-peony1701 power saving ball mill has become a superb advancement inside the framework than traditional. Its cylinder and also the reputation of assistance to compose a total system, therefore, when it is fixed, Crusher of power saving might be hung about the when Foundation. Equipped with two-storey centripetal turnover, its power usage might be decreased by 30%. Discharge grill intrinsic purpose for forcing is changed using a worldwide pattern of handle discharge, which improves the fineness from the last product, and inside the meantime, to boost the ability of 15-20%.The little ball mill is composed largely of feed Division, section, rotating section, carry out part unloading (reducer, gear, motor, electric control), and so on Quill shaft is carbon, with replaceable internal liner. The Rotary wheel is treated with supplies claimant with convenient lining plate in shell to make certain pleasant put on resistance. The appliance operates stable inside the position of readily available work.The good grinding can make the sizing from the particles of considerably reduce, after which decrease the workload from the technique of milling material. enhancing the capability of powder deciding on straight offer most from the advantages that is completed good powder is best suited elected officials, the decline of cement services return amount of powder, and last but not least to decrease the fill mill.And reform to the grinder, or enhance advancement of milling system, could be the bottom solution. The sizing from the particles of make any difference is reduced, the usefulness from the choice into powder is about the rise, and also the little ball mill can obtain excellent working condition. when the technique of grinding is minimal efficiency, there influence not merely the quantity from the manufacturing of ball mill, but in addition to impact the top quality from the cement.Ball Mill is Mill essential gear for grinding right after resources are crushed. The grinder appliance is definitely an effective device for grinding different resources into powder. xingbang in China is primarily a qualified producer of Ball Grinding mill. Ball Mill is extensively utilized in cement industry, substance industry, new developing materials, fire-resistant materials, fertilizer, porcelain and frosted glass marketplace etc. Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html jaw crusher:http://www.xingbangmills.com/Stone_crusher/Jaw-Crusher.html drying equipment:http://www.china-xingbang.com/24.html jaw crusher:http://www.xb-machine.com/Crushing_Machinery/Jaw-Crusher.html

Move ahead to improve the efficiency of ball mill work-peony1701 The mineral slurry flows in for the cell through box feeder, the mineral particle is loose under the objective of consuming drinking water flow of feeder consuming drinking water pipe when they flow in for the cell. impacted by magnetic field, the magnetic particle swarm jointly and sort magnetic cluster or chain. utilizing the magnetism of mineral slurry, the magnetic cluster or chain moves toward the magnetic pole, and can be absorbed in the direction of cylinder. to the purpose that inside the polarity of magnetic pole, the revolving directions alternate constantly, and remain repaired when it is working. when the magnetic cluster and chain go round and round along utilizing the cylinder, the mingled gangue together with other non-magnetic ore fall directly affordable due to the fact of in the direction of mixing phenomena created by alternation of magnetic poles, also it is concentrate that is absorbed in the direction of cylinder surface. The concentrate moves in the direction of accomplish of magnetic method precisely exactly where the magnetism is weakest along utilizing the revolving cylinder, and can be discharged into concentrate tank via the current ejected via the discharging-ore pipe. The non-magnetic or weak magnetic remained are discharged along utilizing the mineral slurry, as well as they are gangue.The is regularly a crucial mining supplies to grind the crushed materials, as correctly since the ball mill is broadly utilized in powder-making production selection which consist of cement, silicate, new-type creating material, refractory material, fertilizer, ore dressing of ferrous substance and non-ferrous metal, decanter or wineglass ceramics, chrome,etc, as correctly since the ball mill can grind numerous ores together with other elements with dried out type and wet type. There are two types of ball mill, grate type and overfall type due to the fact of distinct techniques of discharging material. ball mills:http://www.china-xingbang.com crusher machine:http://www.xbm-mining.com Raymond Mill:http://www.xb-machine.com/Ball_mill/Raymond-Mill.html ball mill:http://www.xingbangmills.com

Mill customers to provide quality and efficient services-peony1701 Chassis-based purposes as correctly since the quantity is huge enough, the web page ought to become plant-based web page columns to separate on the really lowest fifty mm apart via the cylinder with accomplish caps ought to become checked preceding to assembly, the cylinder surface area region ought to become straight, not curved along the axial road is greater in comparison with Factory cylinder 0.1%, the greatest diameter and lowest diameter confront poor youthful youngsters must not be regarded as a huge diameter cylinder of 0.15%, each and every ends inside the spigot flange concentricity and parallelism tolerances must comply with metallurgical gold digesting supplies issued via the Ministry of arranged up specifications allow the arranged up inside the worth of ball discharge and roughly precisely identical order, if any vital essential oil remaining bottom surface, app of sodium and neutralizer with Gou solution or eradication of sufficient depth, so regarding not have an impact about the adhesion in in between mortar and routine for the routine of requirements: to produce a smooth and safe and sound and seem operation inside the mill, the routine ought to be extended to stable, great bottom layer.Ball mills are sized from two t/h to 30 t/h for wet grinding and from 0.5 t/h to 30 t/h for dried out grinding. They have been designed in normal sizes inside the final options in in between 0.074 mm and 0.4 mm in diameter. So, ball mills are best suited for typical mining purposes for instance ore dressing of ferrous substance and non-ferrous metal, quarry applications, decanter or wineglass ceramics, etc.The hollow axis adopts the cast steel as correctly since the lining can replace, the rotating big merchandise processes throughout the technique of casting rolling gear. The barrel whole system is wearable correctly and bears wearable scaleboard. This system work steadily and operates reliably. ball mill:http://www.xb-machine.com block machine:http://www.xbm-aac.com Sand making machine:http://www.china-xingbang.com/42.html ball mills:http://www.china-xingbang.com

xingbang ball mill with excellent technical-peony1701 The is vital gear for grinding of resources is crushed after. It is definitely an efficient device for milling of different powder materials. Crusher extensively utilized inside the cement industry, substance industry, new building materials, and resources resistant to fire, fertilizer, porcelain and frosted glass and so on marketplace there are two methods of grinding: dried out and wet process.Ball mill installation, you must look at the bottom as correctly since the creating adjacent in the direction of system is correctly configured, etc., dependent close to the dimension inside the elevation as correctly since the major element inside the compliance system arranged up dimensions specified throughout the figure, but must really very carefully look at the fantastic of ball mill bottom framework The arranged up may be arranged up to become positive a brilliant ball properly fitted halo, also recognised as lengthy life style and big operation percentage as correctly since the bottom inside the inspection equipment, ready, you can proceed to arranged up the bottom bolts, major bearing chassis and housing, etc., the major bearing web web sites level of tolerance 0.10/1000; two sites, the relative elevation inside the fluid is generally associated gear is perfect to assess the height variation must not be regarded as a huge 0.5 mm cylinder and accomplish hat assembly ought to become mixed utilizing the surface area region inside the burr flash and painting cleaned, and coated with guidebook oil, ought to become in close to get in touch with utilizing the surface, through which not only a member of any shims in in between the two major bearing centerline variety via the web page must comply with metallurgical deviation framework and arranged up of machinery and supplies framework and Acceptance inside the best suited provisions of each and every sides inside the facet inside the gap the sum inside the diary diameter ought to become 0.15 ~ 0.20% as correctly since the major bearing and spherical bearing spherical ought to become dependent on good, essential rotation ought to become versatile and in the placement to withstand the static fill and vibration designed via the mill fill operation. ball mill:http://www.xb-machine.com ball mill:http://www.xingbangmills.com Sand making machine:http://www.china-xingbang.com/42.html Rotary drier:http://www.xbm-aac.com/Dry-Equipment.html

Contact person: Ken Email: oilpurifierken@gmail.com nkoilpurifier@hotmail.com MSN: purifierken@hotmail.com Skype: oilpurifierken Yahoo Messenger: oilpurifierken Google Talk: oilpurifierken@gmail.com Mobile: 0086-18723127016 Tel: 0086-23-68645073 Fax: 0086-23-68089506 Website: http://www.nakinoilpurifier.com/ http:www.nkoilpurifier.com http://nakinoilpurifier.weebly.com http://oilpurifierken.tradeprince.com http://oilpurifierken.en.china.cn http://oilpurifierken.en.ecplaza.net Application: According to user’s requirements, we developed Series ZYM mobile insulating oil purifier, this machine is mainly used for dealing with unqualified transformer oil, switch oil, mutual inductor oil, ZYM belong to Double-stage transformer oil purifier can quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil’s dielectric strength, effectively making sure electric equipments working safely and normally. Series ZYM oil purifier is particularly suitable for treating high-grade transformer oil, super-voltage transformer oil and new transformer oil. It can be used for filtration of more than 110V substation live line work onsite. Meanwhile, Series ZYM oil purifier can be used as independent vacuum source with functions of vacuum drying and vacuum oiling. The best advantage of ZYM is that can move long distance working in field. Features: 1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy. 2. Installation of car tyres, Bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed. 3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil 4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 6. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

Contact person: Ken Email: oilpurifierken@gmail.com nkoilpurifier@hotmail.com MSN: purifierken@hotmail.com Skype: oilpurifierken Yahoo Messenger: oilpurifierken Google Talk: oilpurifierken@gmail.com Mobile: 0086-18723127016 Tel: 0086-23-68645073 Fax: 0086-23-68089506 Website: http://www.nakinoilpurifier.com/ http:www.nkoilpurifier.com http://nakinoilpurifier.weebly.com http://oilpurifierken.tradeprince.com http://oilpurifierken.en.china.cn http://oilpurifierken.en.ecplaza.net Application Series ZYD Double-stage transformer oil purifier can quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil’s dielectric strength, effectively making sure electric equipments working safely and normally. Series ZYD oil purifier is particularly suitable for treating high-grade transformer oil, super-voltage transformer oil and new transformer oil. It can be used for filtration of more than 110V substation live line work onsite. Meanwhile, Series ZYD oil purifier can be used as independent vacuum source with functions of vacuum drying and vacuum oiling. Features 1. Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value ≤ 5Pa 2. Two vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly. 3. Double-horizontal film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 6. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 8. Functions of live line work onsite, vacuum drying and vacuum oiling.

Semi-automatic paste filling machine Filling Machine Product Description; xunjie11dtjy Our company products include;Oil filling machine,Liquid filling machine,Paste filling machine,ect.Do you know which packaging machine is the best in China? Dongtai machinery is a professional packaging machinery manufacturer. Provide the user the best solution, through long-term customer service has set up a perfect sales service system. Principles and characteristics of 1, DG semi-automatic piston type single head Paste Filling Machine, developed by DG is the semi-automatic piston type filling a series of high concentrations of fluids filling the filling machine, which is driven by a cylinder A piston-and-valve three principles to extract and play high concentration of materials,and to magnetic reed switch control cylinder stroke, you can adjust the amount of filling. 2, this device has simple structure, reasonable and easy to understand, and high accuracy. 3, reasonable design, model compact, easy to operate pneumatic part of Germany FESTO and Taiwan are used AirTac pneumatic components. 4, the material contact parts are used 316L stainless steel material, meet the GMP requirements. 5, filling volume and filling speed can be arbitrarily adjusted, filling and high accuracy. 6, filling, focusing instead on use of anti-drip, anti-filling drawing and lifting devices. Related products links; Liquid filling machines | filling machines | Fillers | Filling Equipment | Inline Filling Systems ------------------------------------------------ Jinan Dongtai Machinery Manufacturing Co., Ltd Department; International Trade Department Post Code/ZIP; 250100 Contact Person; karen Gong(sales manager) Tel; 0086-0531-88738866-605 Fax; 0086-0531-88902662 Mobile Phone ; 86-15866784676 MSN; dongtaipack@hotmail.com Email; shandongxunjie@163.com Website: http://www.dongtaipack.com <-> filling machines http://www.ltete.com <-> fillers http://www.xunjiejx.com <-> Filling Equipment http://www.jinanxunjie.cn/sdp/337119/4/main-1483444/0/Home.html <->Inline Filling Systems http://www.jinanxunjie.cn/sdp/337119/4/pl-1483445/0/Product_Catalog.html <->Oil Filling Machine http://www.xunjiejx.com/Filling_Machines1.htm <->Liquid Filling Machine http://www.ltete.com/filling-machine-one-head-ointment-filling-machine.html <->OintmentFillingMachine http://www.dongtaipack.com/gallery1/products-list.htm <->Oil Weighing Filling Machine http://www.ltete.com/filling-machine-oil-filling-machine-xj8f.htm <-> Oil Filling Machine xj8f http://www.jinanxunjie.cn/sdp/337119/4/pd-1483445/2338032-743800.html <-> Oil Filling Machine Address; No.3843,Jichang Road,Lingang Development Zone,Jinan China

Product Name (-)-Corey Lactone Diol CAS Number 32233-40-2 Molecular Formula C8H12O4 Molecular Weight 172.18 Lot Size 10 kg TEST RESULTS Appearance - Colour Off-white Appearance - State Crystal Powder TLC One main spot Melting Point 116.2~117.2℃ NMR Spectroscopy-1H Conforms to Structure NMR Spectrum Purity by HPLC(ELSD) □99.5% [α]20 -45.1° (c=1.4, MeOH) MS Result [M+H]+ 173.1 Loss on drying 0.2% 1. Milk Thistle Extract 2. Gingko Biloba Extract 3. Water-Soluble Ginkgo Biloba Extract 4. Konjac Gum 5. Lycopene 6. Red Clover Extract 7. Rhodiola rosea Extract 8. Rosemary Extract 9. Coenzyme Q10 10. Ginseng Extract 11. Grape Seed Extract 95% Proanthocyanidins 12. Goji Berry Concentrated Juice Powder 13. Marigold Extract 14. Chlorogenic acid 98% 15. Curcumins 16. Chrysanthemum Extract 17. Soy Bean Extract 40% Isoflavones 18. Trans-Resveratrol 19. Ursolic acid 20. De-bitter Green Tea Catechin 21. EGCG 22. Natural L-Theanine 23. Green Tea Extract 24. Instant Green Tea Powder 25. Instant Lemon Extract Powder 26. Instant Black Tea Powder (Type I) 27. Instant Black Tea Powder (Type II) 28. Instant White Tea Powder 29. Instant Oolong Tea Powder 30. Instant Pu-erh Tea Powder 31. Match Tea Powder (300Mesh) 33. Banana Powder (Freeze Dried) 34. Bitter Gourd Extract 35. Black currant Concentrated Juice Powder 36. Blue honeysuckle Concentrated Juice Powder 37. Blueberry Concentrated Juice Powder 38. Blueberry Extract 39. Cranberry Concentrated Juice Powder 40. Raspberry Concentrated Juice Powder 41. Seabuckthorn berry Concentrated Juice Powder 42. Strawberry Powder (Freeze Dried) Herbal formula 1. Weight loss 2. Diabetes 3. PMS formula for women 4. Anti-fatigue 5. Cholesterol reduction 6. Liver protection 7. Radiation preventiong 8. Anti-cancer 9. Relaxation /Anti-depression Changsha Sunfull Bio-tech Co., Ltd ATTN∶Ms.Alysa Liu Tel:86-731-82970067 EXT 802 Fax:86-731-82970070 Mobile:86-18684840478 Email:alysa@sunfullbio.com MSN:alysaliu@hotmail.com Skype:alysa-liu www.sunfullbio.com

Characteristics: Spectra Polaris Printheads 4/6/8 printheads / 4 colors (CMYK) or 6colors(CMYK,LC,LM) Highest printing speed up to 110sqm/hr Printing width of 3.20 meters Highest printing resolution of 800x1200 dpi General Information Printing methods: Drop-on-demand piezo electric Ink reservoirs: Refillable on the fly while printing / 4000ml per color Ink characteristics: Solvent-based pigments Printhead controls: Print head temperature and voltage are software adjustable Media feeding system: Free spin / motor-driven lazy loop for optimal banner tension Media take-up system: Automatic motor-driven spool capacity Media handling options: Roll to roll Drying system: Digitally controlled heater and front-mounted fans RIP software: Photoprint 6.1 (Windows 2000, Windows Xp Pro Sp2) Color management: ICC based color, adjustment curves, density adjustment File formats: Bitmaps, TIFF，JPEG，Postscript 3，EPS，PDF etc. Electrical requirements: 50Hz/60Hz，220V(±10%)>20A Environmental requirements: Ambient temperature∶20-30℃，Relative humidity∶40-70% Warranty: 1 year (please consult your local dealer for details) Technical Specification Model: MT-LJ 320P Printing heads: Spectra Polaris printheads No. of Print heads: 4/6/8 heads Color: 4 colors (CMYK) or 6colors(CMYK,LC,LM) Resolution options: 300x400,300x600,400x600,600x600,600x800,800x1200 Printing Speed: Draft Quality: Standard Quality: High Quality: Ultra Quality: Up to 110sqm/hr Up to 75sqm/hr Up to 55sqm/hr Up to 35sqm/hr Maximum media width: 330 cm Maximum printing width: 320 cm Maximum roll dimensions: Φ 35 cm Media Types: Paper, advertising banner, PVC, mesh fabrics, adhesive vinyl etc. Outdoor durability: 2 years Dimensions: 4.76mL x 1.09mW x 1.40mH Weight(Net)∶ 700 kg

MT-Starjet Series Textile Printer have been used most field such as advertisement printing textile digital printing, carpet digital printing, windows curtain digital printing and interior decoration printing and flax printing widely. LOW COST It is simple and leaves out deat transfer process one person can operates with high efficiency and short time. Low cost and no need of any kind of interval paper, bearing the highest cost performance. Adopting the most advanced thermal energy technology, Low power consumption, saves electricity, and conserve energy cost. HIGH PRODUCTIVITY Brand-New Printing Concert, Unnecessarily handmade plate making, printing directly. Rapid speed and various printer to choose MORE BUSINESS OPPORTUNITIES Suitable for small lot, Personality, Diversity Printing, Without Limit Of Quantity. The printed image color is bright and vivid with nice color gamut. FEATURES □Far Infrared Blackbody Tube Radiation Electrothermal Heating □Intelligent PID Temperature Control □Digital Tension Control □Feeding Speed and Taking up Speed are Controllable □Vacuum Fan Delivery is Controllable □Quick Tail Gas Treatment □Convenient to Maintain □Easy to Set Up and Operate Product Model MT-Starjet TX5 Textile Printer Print Head 2pcs Epson DX5 Print Head Number of nozzles 2880 nozzles Ink Colors 4colors : Cyan, Magenta, Yellow, Black Print Head height Adjustable 2~5mm Ink Type Sublimation Ink and Reactive Ink Ink Supply mode Continuous Ink Supply (CISS) Ink Cartridge 8*350ml Resolution 1440dpi (Max) Ink droplet size 1.5-21 pl Printing width 1.8 M (Max) Speed High speed Mode: 22.5 m2/hour Standard Mode: 14.5 m2/hour Photo Mode:11.2 m2/hour Take up and Feeding in system Equipped Special Functions Automatic printhead nozzle cleaning and Automatic print head Capping Heating System The heaters for front and center platform separately. PID temperature control Temperature Temperature range: room temperature~250℃ Drying system Outer fan RIP software IPrint 3.0 Cn/En Supported Image format: Tiff, Jpeg and other common image formats PostScript file process (Optional) Color Mode: RGB or CMYK Control Software Control Software MT-Starjet5 Control Software (Cn/En) Interface USB 2.0、RS232 Operating System Windows XP Voltage AC 220-240V 50/60HZ or AC 110-120V 50/60HZ Power consumption Printer 1000W(Max) Heating System 3500W(Max) Air-Cleaning 350W(Max) Dimension (W x D x H) 2,840 x 975 x 1,435 mm Weight Net Weight: 470kg Gross Weight:570kg

3.2m MT-Starjet Epson DX5.5 Printer Over 10 years experience in printing technology The 5.5th Generation of Micro Piezo Technology Economy, Stability, Comprehensiveness 1. Micro Piezo Printing Technoligy The latest Epson 5.5th generation Micro Piezo printhead can reach resolution of 1440 dpi. Its extremely fine ink droplets are able to fully reflect the rich detail of the picture, and to fulfill the requirement of one meter viewing range. Suitable for both water based dye and eco-solvent pigment inks. And it can offer one to two years service life. 2. Variable Ink Droplets Technology The variable ink droplets technology can project micron grade ink drops of various sizes. Ink drops between 1.5pl to 21pl. to produce best color results, smooth gradients, and fine details. 3. Progressive Pass Compensation Technology Progressive pass compensation technology is to remove the grinning of white ground or edge overlap (banding ling), which is usually by mechanical inaccuracy and further improve the yield and save the cost. 4. Stochastic Ink-droplet Distribution With the technique, some problems caused by nozzle clog, like white strips. Even with 15% clogged, Starjet series printers can still ensure the printing quality. 5. Multi-Head Arrangement Technology Dual head can double the printing speed. In quad head model, CMYK heads can be replaced separately. This can lower the maintenance cost. User can choose among single head mode, multi-head quality mode and multi-head performance mode to meet all needs. 6. Brand-new mechanical structure It includes a linear guide drive structure, XY axis grating positioning system, multi-channel ink supply system, heating system on both front and rear platform, media absorption system, and automatic printer head service station. Besides, it also has a paper handling system that can bear loads up to 70kg and a frying system composed of eight fans. The machine weighs 220kg in total and 90%of its components are very durable. 7. USB 2.0 bundled with RIP USD 2.0 interfaces supports high speed data transmission and collaborative operation. It greatly enhances the printing performance. Ipint 3 fully complies with ICC color management standard. And it supports automatic image tiling and composition, liner color adjustment and inking management and etc. with the optional PS component, it is also able to process Adobe Postscript files. 8. Wide range of media compatibility The height of the print head is adjustable between 2-5mm, up to 1.9m media in width. Our printers are featuring ink compatibility with ECO solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. Various of media printing ability including, Self-adhesive paper, PVC, Mesh fabric, Textile, PVC flex banner, Adhesive Vinyl, Photo paper, PP, Back light film, Canvas, Non-woven fabric, Chemical fabric, PU leather, Micro fibre, Leather and etc. 9. Easy to maintain & Easy to use Starjet series printers design to meet the high standard of user friendly and operation stability in the industry. It is operability, reliability and durability can compete with any other famous-brand printers in the market. 10. High performance-cost ratio Starjet series printers have world leading performance and almost half the market price to other competitors. Furthermore, the printers are able to cover 1.8 meter printing width, and the components we chose are reliable and long lasting. They are designed to satisfy customers with large yield. Introduction of products: MT-Starjet series large format printers with high resolution use the 5.5th Generation of Micro Piezo Technology based printer heads. They provide the output with dual CMYK colors, 3.2M printing width, and support Eco solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. They are suitable for the fields of indoor/outdoor advertising, labels and signs, textile printing, decoration, gifts, wedding photos, and so on. MT-Starjet 5.5L The lowest cost of large format printers with micro piezo printhead in the world. 1. Using four of Epson 5.5th Generation of Micro Piezo printhead, 2160 print nozzles in total. The cost of each printhead is about 1000 RMB. CMYK heads can be replaced separately. The lowest cost of large format printers with micro piezo printhead in the world by now. 2. Parallelization technology of multiple printheads. The print mode can be chosen between multi-head quality mode and multi-head performance mode. 3. Standard mode 13m2/h. 4. Suitable for customers seeking cost-effective, with appropriate speed and precision of printing, and lower maintenance cost. 5. Technology of Micro Piezo Printing, Variable ink droplets, Progressive Pass Compensation, Stochastic Ink-droplet Distribution. Bundled with RIP, Brand-new mechanical structure, Wide range of media compatibility, High performance to cost ratio. Product Model MT-Starjet 5.5L Printing Technology The EpsonDX5.5 Micro Piezo Technology Number of nozzles 2160 nozzles per 4 head Ink Colors 4colors : Cyan, Magenta, Yellow, Black Printer Head height Adjustable 2~5mm Resolution 1440dpi (Max) Ink droplet size 1.5-21 pl Printing width 3.2M (Max) Speed High speed Mode: 25.2m2/hour Standard Mode: 13 m2/hour Photo Mode: 10 m2/hour Heating System The heaters for front and center platform separately. PID temperature control Temperature Temperature range: room temperature~80℃ Drying system External fan Media Width: 3.2 M (max media width Media feeding mode: Automatic feeder Automatic take up (optional) self-adhesive paper, PVC, mesh fabric, textile, PVC flex banner, Self Adhesive Vinyl , paper, fabric, leather and etc. Ink T5.5 ECO solvent pigment ink T5.5 ECO solvent Dye ink ST5.5 water based dye ink Ink Supply Mode: Pipe based continues ink supply Ink Cartridge: 8 x 350ml RIP software Photoprint Rip Software Supported Image format: Tiff, Jpeg and other common image formats PostScript file process (Optional) Color Mode: RGB or CMYK Control Software Control Software MT-Starjet5 Control Software (Cn/En) Interface USB 2.0、RS232 Operating System Windows XP Voltage AC 220-240V 50/60HZ or AC 110-120V 50/60HZ Power consumption Power: 1KW (Max), 300W (Printing) Power consumption Ambient temperature: 20-25℃ Humidity Humidity: 40~70 % Non-condensing Dimension Printer Dimension(W x D x H) 4,300 x 900 x 1,250 mm (Bracket Included) Packing Dimension(W x D x H): 4,500 x 980 x 700mm (Bracket Included) Weight Net Weight: 380 kg (Bracket Included) Gross Weight: 560 kg (Bracket Included)

1.8m MT-Starjet Epson DX5.5 Printer Over 10 years experience in printing technology The 5th Generation of Micro Piezo Technology Economy, Stability, Comprehensiveness 1. Micro Piezo Printing Technoligy The latest Epson 5th generation Micro Piezo printhead can reach resolution of 1440 dpi. Its extremely fine ink droplets are able to fully reflect the rich detail of the picture, and to fulfill the requirement of one meter viewing range. Suitable for both water based dye and eco-solvent pigment inks. And it can offer one to two years service life. 2. Variable Ink Droplets Technology The variable ink droplets technology can project micron grade ink drops of various sizes. Ink drops between 1.5pl to 21pl. to produce best color results, smooth gradients, and fine details. 3. Progressive Pass Compensation Technology Progressive pass compensation technology is to remove the grinning of white ground or edge overlap (banding ling), which is usually by mechanical inaccuracy and further improve the yield and save the cost. 4. Stochastic Ink-droplet Distribution With the technique, some problems caused by nozzle clog, like white strips. Even with 15% clogged, Starjet series printers can still ensure the printing quality. 5. Multi-Head Arrangement Technology Dual head can double the printing speed. In quad head model, CMYK heads can be replaced separately. This can lower the maintenance cost. User can choose among single head mode, multi-head quality mode and multi-head performance mode to meet all needs. 6. Brand-new mechanical structure It includes a linear guide drive structure, XY axis grating positioning system, multi-channel ink supply system, heating system on both front and rear platform, media absorption system, and automatic printer head service station. Besides, it also has a paper handling system that can bear loads up to 70kg and a frying system composed of eight fans. The machine weighs 220kg in total and 90%of its components are very durable. 7. USB 2.0 bundled with RIP USD 2.0 interfaces supports high speed data transmission and collaborative operation. It greatly enhances the printing performance. Ipint 3 fully complies with ICC color management standard. And it supports automatic image tiling and composition, liner color adjustment and inking management and etc. with the optional PS component, it is also able to process Adobe Postscript files. 8. Wide range of media compatibility The height of the print head is adjustable between 2-5mm, up to 1.9m media in width. Our printers are featuring ink compatibility with ECO solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. Various of media printing ability including, Self-adhesive paper, PVC, Mesh fabric, Textile, PVC flex banner, Adhesive Vinyl, Photo paper, PP, Back light film, Canvas, Non-woven fabric, Chemical fabric, PU leather, Micro fibre, Leather and etc. 9. Easy to maintain & Easy to use Starjet series printers design to meet the high standard of user friendly and operation stability in the industry. It is operability, reliability and durability can compete with any other famous-brand printers in the market. 10. High performance-cost ratio Starjet series printers have world leading performance and almost half the market price to other competitors. Furthermore, the printers are able to cover 1.8 meter printing width, and the components we chose are reliable and long lasting. They are designed to satisfy customers with large yield. Introduction of products: MT-Starjet series large format printers with high resolution use the 5.5th Generation of Micro Piezo Technology based printer heads. They provide the output with dual CMYK colors, 1.8M printing width, and support Eco solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. They are suitable for the fields of indoor/outdoor advertising, labels and signs, textile printing, decoration, gifts, wedding photos, and so on. MT-Starjet 5.5 The lowest cost of large format printers with micro piezo printhead in the world. 1. Using four of Epson 5.5th Generation of Micro Piezo printhead, 2160 print nozzles in total. The cost of each printhead is about 1000 RMB. CMYK heads can be replaced separately. The lowest cost of large format printers with micro piezo printhead in the world by now. 2. Parallelization technology of multiple printheads. The print mode can be chosen between multi-head quality mode and multi-head performance mode. 3. Standard mode 12m2/h. 4. Suitable for customers seeking cost-effective, with appropriate speed and precision of printing, and lower maintenance cost. 5. Technology of Micro Piezo Printing, Variable ink droplets, Progressive Pass Compensation, Stochastic Ink-droplet Distribution. Bundled with RIP, Brand-new mechanical structure, Wide range of media compatibility, High performance to cost ratio. Product Model MT-Starjet 5.5 Printing Technology The EpsonDX5.5 Micro Piezo Technology Number of nozzles 2160 nozzles per 4 head Ink Colors 4colors : Cyan, Magenta, Yellow, Black Printer Head height Adjustable 2~5mm Resolution 1440dpi (Max) Ink droplet size 1.5-21 pl Printing width 1.8 M (Max) Speed High speed Mode: 22m2/hour Standard Mode: 11m2/hour Photo Mode: 8.5m2/hour Heating System The heaters for front and center platform separately. PID temperature control Temperature Temperature range: room temperature~80℃ Drying system External fan Media Width: 1.9 M (max media width Media feeding mode: Automatic feeder Automatic take up (optional) self-adhesive paper, PVC, mesh fabric, textile, PVC flex banner, Self Adhesive Vinyl , paper, fabric, leather and etc. Ink T5.5 ECO solvent pigment ink T5.5 ECO solvent Dye ink ST5.5 water based dye ink Ink Supply Mode: Pipe based continues ink supply Ink Cartridge: 8 x 350ml RIP software Photoprint Rip Software Supported Image format: Tiff, Jpeg and other common image formats PostScript file process (Optional) Color Mode: RGB or CMYK Control Software Control Software MT-Starjet5 Control Software (Cn/En) Interface USB 2.0、RS232 Operating System Windows XP Voltage AC 220-240V 50/60HZ or AC 110-120V 50/60HZ Power consumption Power: 1KW (Max), 300W (Printing) Power consumption Ambient temperature: 20-25℃ Humidity Humidity: 40~70 % Non-condensing Dimension Printer Dimension(W x D x H) 2,840 x 900 x 1,250 mm (Bracket Included) Packing Dimension(W x D x H): 3,000 x 930 x 730mm (Bracket Included) Weight Net Weight: 220 kg (Bracket Included) Gross Weight: 300 kg (Bracket Included)

3.2m MT-Starjet Epson DX5 Printer Over 10 years experience in printing technology The 5th Generation of Micro Piezo Technology Economy, Stability, Comprehensiveness 1. Micro Piezo Printing Technoligy The latest Epson 5th generation Micro Piezo printhead can reach resolution of 1440 dpi. Its extremely fine ink droplets are able to fully reflect the rich detail of the picture, and to fulfill the requirement of one meter viewing range. Suitable for both water based dye and eco-solvent pigment inks. And it can offer one to two years service life. 2. Variable Ink Droplets Technology The variable ink droplets technology can project micron grade ink drops of various sizes. Ink drops between 1.5pl to 21pl. to produce best color results, smooth gradients, and fine details. 3. Progressive Pass Compensation Technology Progressive pass compensation technology is to remove the grinning of white ground or edge overlap (banding ling), which is usually by mechanical inaccuracy and further improve the yield and save the cost. 4. Stochastic Ink-droplet Distribution With the technique, some problems caused by nozzle clog, like white strips. Even with 15% clogged, Starjet series printers can still ensure the printing quality. 5. Multi-Head Arrangement Technology Dual head can double the printing speed. In quad head model, CMYK heads can be replaced separately. This can lower the maintenance cost. User can choose among single head mode, multi-head quality mode and multi-head performance mode to meet all needs. 6. Brand-new mechanical structure It includes a linear guide drive structure, XY axis grating positioning system, multi-channel ink supply system, heating system on both front and rear platform, media absorption system, and automatic printer head service station. Besides, it also has a paper handling system that can bear loads up to 70kg and a frying system composed of eight fans. The machine weighs 220kg in total and 90%of its components are very durable. 7. USB 2.0 bundled with RIP USD 2.0 interfaces supports high speed data transmission and collaborative operation. It greatly enhances the printing performance. Ipint 3 fully complies with ICC color management standard. And it supports automatic image tiling and composition, liner color adjustment and inking management and etc. with the optional PS component, it is also able to process Adobe Postscript files. 8. Wide range of media compatibility The height of the print head is adjustable between 2-5mm, up to 1.9m media in width. Our printers are featuring ink compatibility with ECO solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. Various of media printing ability including, Self-adhesive paper, PVC, Mesh fabric, Textile, PVC flex banner, Adhesive Vinyl, Photo paper, PP, Back light film, Canvas, Non-woven fabric, Chemical fabric, PU leather, Micro fibre, Leather and etc. 9. Easy to maintain & Easy to use Starjet series printers design to meet the high standard of user friendly and operation stability in the industry. It is operability, reliability and durability can compete with any other famous-brand printers in the market. 10. High performance-cost ratio Starjet series printers have world leading performance and almost half the market price to other competitors. Furthermore, the printers are able to cover 1.8 meter printing width, and the components we chose are reliable and long lasting. They are designed to satisfy customers with large yield. Introduction of products: MT-Starjet series large format printers with high resolution use the 5th Generation of Micro Piezo Technology based printer heads. They provide the output with dual CMYK colors, 3.2M printing width, and support Eco solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. They are suitable for the fields of indoor/outdoor advertising, labels and signs, textile printing, decoration, gifts, wedding photos, and so on. MT-Starjet 5L The real leader of large format printer with high-resolution. Perfect combination of quality and performance. 1. Using two of Epson 5th Generation of Micro Piezo printhead, 2880 Print nozzles in total, Arranging in cross. 2. Parallelization technology of multiple printheads. Each print pass covers 2 inches area. 3. Standard mode 26m2/h, Draft mode 56m2/h, Twice as faster as competition printers. 4. Technology of Micro Piezo Printing, Variable ink droplets, Progressive Pass Compensation, Stochastic Ink-droplet Distribution. Bundles with RIP, Brand-new mechanical structure, Wide range of media compatibility, High performance to cost ratio. 5. The efficiency of the Starjet 5L printers is twice as that of the competition printers. Starjet 5L printers are very suitable for customers who need to make their volume-printings in short time. Not only reducing the investment of printer, but also lowering the cost of maintenance. Well received by professional users. Product Model MT-Starjet 5L Printing Technology The Epson DX5 Micro Piezo Technology Number of nozzles 2880 nozzles per 2 head Ink Colors 4colors : Cyan, Magenta, Yellow, Black Printer Head height Adjustable 2~5mm Resolution 1440dpi (Max) Ink droplet size 1.5-21 pl Printing width 3.2M (Max) Speed High speed Mode: 26m2/hour Standard Mode: 17.5m2/hour Photo Mode:13.2m2/hour Heating System The heaters for front and center platform separately. PID temperature control Temperature Temperature range: room temperature~80℃ Drying system External fan Media Width: 3.2 M (max media width Media feeding mode: Automatic feeder Automatic take up (optional) self-adhesive paper, PVC, mesh fabric, textile, PVC flex banner, Self Adhesive Vinyl , paper, fabric, leather and etc. Ink ECO solvent pigment ink ECO solvent Dye ink Water based dye ink Ink Supply Mode: Pipe based continues ink supply Ink Cartridge: 8 x 350ml RIP software Photoprint Rip Software Supported Image format: Tiff, Jpeg and other common image formats PostScript file process (Optional) Color Mode: RGB or CMYK Control Software Control Software MT-Starjet5 Control Software (Cn/En) Interface USB 2.0、RS232 Operating System Windows XP Voltage AC 220-240V 50/60HZ or AC 110-120V 50/60HZ Power consumption Power: 1KW (Max), 300W (Printing) Power consumption Ambient temperature: 20-25 Centi Degree Humidity Humidity: 40~70 % Non-condensing Dimension Printer Dimension(W x D x H) 4,300 x 900 x 1,250 mm (Bracket Included) Packing Dimension(W x D x H): 4,500 x 980 x 700mm (Bracket Included) Weight Net Weight: 380 kg (Bracket Included) Gross Weight: 560 kg (Bracket Included)

The Seventh-Generation (DX7) Micro Piezo Printing Technology As the advanced version of the DX-5 head, DX-7 head stands for the better reliability and stability. Besides better ink droplets and consistency, the working life of the print head has improved dramatically. The DX7 is much more durable than DX5 for the eco-solvent ink printing. Features 1. DX-7 Micro Piezo print Technology DX-7 print head with micro piezo print technology can show not only the excellent printing quality, but also the durability to the Eco-solvent inks. DX-7 print head has a longer and more durable working life. The improvement of printing precision makes the ink droplets smaller, and the stability is better than that of DX-5 print head. 2. Dual Print Head Design The technology of two print heads is the mature technology that we bring out to the market in the early stage for years. Now the product with two DX-7 print heads will definitely replace the previous version of printers with DX-5 print heads. 3. Comprehensive Media Handling The standard media handling includes the automatic feeding&take up system that can load up as heavy as 200kgs. The heating system and hot air drying system which can now easily print on flex banner and diversity media. 4. 1.8m Printer also Available For the best product coverage, the 1.8m printers with one DX-7 print head(MT-Starjet 7701) model, and two DX-7 heads(MT-Starjet 7702) model are also available for your easy choice and best buy. Item MT-Starjet 7702 MT-Starjet7701 Print head Two Epson DX7 Micro-Piezo One Epson DX7 micro-Piezo Number of Nozzles 1440nozzles per head Color 4 Color: Cyan, Magenta, Yellow, Black Height of print head 2-5mm Size of ink-droplet 1.5pl-21pl Printing Width 1.82m Speed 3pass 34.5sq.m per hour 17.0sq.m per hour 4pass 26.5sq.m per hour 13.0sq.m per hour 6pass 21.0sq.m per hour 10.5sq.m per hour 8pass 13.0sq.m per hour 6.5sq.m per hour Media Width 1900mm Media take up Yes Media feeder yes Media payload 70kgs Heating System Print Heater and Post heater with PID temperature control temperature range: room temperature to 80 centi degree Ink Eco Solvent Ink Water-based Dye Ink Reactive printing ink Ink Cartridge 8*350ml continuous ink supply Rip Software Iprint3.0 Control Software Print Console Operation System MS Windows XP& Windows7 Interface USB2.0 & RS 232 Power Voltage AC220-240V 50-60HZ or AC110-120V 50-60HZ Printing Environment Temperature: 20-25 centi degree, Humidity: 40-60% Printer dimension W2840*D900 * H1250mm Packing dimension W2920*D930 * H730mm Net Weight 220kgs Gross Weight 300kgs

Inkjet Printer 5500 is high-speed printer uses advanced print head design and Intelligent Mask Technology□ for maximum productivity, reliability and image quality. Encad's new Quantum Ink□ and guaranteed KODAK Wide-Format Inkjet Media allow you to say yes to more customers more often. THE SPEED YOU NEED The Inkjet Printer 5500 sets a new standard with print speeds of 150 square feet per hour (14.0 sq. meters/hr) in Productivity mode and 220 square feet per hour (20.4 sq. meters/hr) in High Speed mode. A new print head with 640 nozzles provides high-speed printing on a wide variety of media. The Rapid Evaporation Drying System ensures that your prints are instantly ready for take-up, even at full machine speed. EXCEPTIONAL IMAGE QUALITY With up to 1200x600 print resolution, the Inkjet Printer 5500 offers incredible image quality. Further, Encad's patented Intelligent Mask Technology (IMT) optimizes color gamut, density and vibrancy without compromising the blazing output speed of the Inkjet Printer 5500. IMT applies a unique screen to image files for each color and print mode. Quality is further enhanced with new ENCAD Quantum Ink developed with Kodak’s unparalleled Color Science. Quantum Dye Ink boasts industry-leading color gamut and guaranteed lightfastness for the ultimate in indoor photographic quality. The broad color gamut of our Quantum Pigment Ink gives you the flexibility to print photographic quality images for long lasting indoor applications, as well as UV- and water-resistant prints for durable outdoor displays. THE BENCHMARK OF RELIABILITY AND EASE OF USE Breakthrough ink system technology and advanced print head design ensure the NovaJet 1000i leads the way in reliability and ease of use. The effective life of our new thermal print head delivers an average of 2.1 liters of ink throughput. To offer you true unattended printing, an Intermediate Ink Reservoir maintains a constant supply of ink to the print head, and a warning system indicates when ink is getting low. The staggered Carriage Assembly provides better image quality and easy cartridge replacement, while an Active Service Station automatically fills, primes and cleans your ink cartridges. The total result is optimal performance, less maintenance and greater printer uptime. INTELLIGENT SOFTWARE SOLUTIONS Our unique Inkjet Printer 5500 Software Suite puts you in charge of your workflow with software enabled precision calibration, automated networking setup, and remote printer access. Manage your business for optimum profitability with integrated job tracking, job accounting and supplies management. We take your productivity seriously. Inkjet Printer 5500's unique combination of speed, image quality and reliability is unmatched by any wide-format printer in its class. Let the Inkjet Printer 5500 set a new standard for your business. Print Technology Thermal inkjet with IMT□ technology Print Resolution 300 x 300 dpi, 600 x 600 dpi, 1200 x 600 dpi Print Speed Standard Print Speeds at 600 dpi High Speed 220 sfph (20.4 smph) Productivity 150 sfph (14 smph) Fine 115 sfph (10.7 smph) Enhanced 75 sfph (7.0 smph) Ultrafine 30 sfph (2.8 smph) Ink Compatibility Water base dye ink and pigment ink Media Handling Standard automated media take-up and feeder system with media cutter Media Drying Rapid Evaporation Drying System. Dual component system preheats media via internal conductive heated nose and air plenum carries moisture away for take-up at full speed. Interfaces 100base-T Ethernet (TCP/IP) Software Maintop Software Power Consumption 25 watts idle, 1120 watts typical,Rated 10.5 A, 100 - 120 / 200 - 240 V, 50 - 60 Hz Environment Operating 59° F to 85° F (15° C to 30° C ) 20 to 70% RH non-condensing Dimensions 2.8m(length)×0.7m(width)×0.5m(height) Weight 176kg Media Specifications Roll Size Width 24" to 60" (61 cm to 152 cm) Max External Diameter 6" (15 cm) Core Diameter 2" (5 cm) 3" (7.6 cm) with adapter Maximum Weight 60 lbs (27 kg) Printable Area 58.8” (149.4 cm) Normal, 59.6” (151.4 cm) Expanded

The NovaJet 750 offers affordable high production printing with ink flexibility. Three improvements critical to success in the graphics market are designed into the NovaJet 750 fast printing speeds, thermal drying, and the flexibility to switch from indoor to outdoor ink sets FAST PRINTING AND DRYING The NovaJet 750 prints photo quality at 63 square feet per hour (5.9 smph). To take advantage of this fast printing speed, the NovaJet 750 has a thermal drying system for quick drying. That means immediate take-up and lamination with a wide variety of inks and media. DYE AND PIGMENT INK FLEXIBILITY The NovaJet 750 has eight ink lines and eight ink reservoirs, so switching between indoor and outdoor ink sets is as easy as swapping out the four ink cartridges. Newly re-designed quick disconnect cartridge valves and septum connectors make changing cartridges mess free TECHNOLOGY FOR BETTER QUALITY AND FASTER SPEED Encads MicroBurst and Jet Monitoring technologies work together to increase ink drop velocity and optimize formation. This provides the ultimate in dot shape, placement accuracy, and print quality, while further increasing overall print speed. Take the first step toward greater productivity with the NovaJet 750 printer from Encad. 600 DPI PRINT RESOLUTION 600 x 600 dpi, 300 x 300 dpi Addressable RTI allows 300 to 600 Dpi RIP file conversion on-the-fly ENCADS JET MONITORING Technology allows faster Four color printing. INK INNOVATION Dual ink lines and eight ink Reservoirs make switching Inks fast and easy. PRINT TECHNOLOG: On-demand thermal inkjet INK DELIVERY SYSTEM: Continuous ink system. INK: Cyan, Magenta, Yellow, Black MEDIA HANDLE: Standard automated media take-up & feeder system PRINT WIDTH: 1.52M PRINT RESOLUTION: 600 dpi ENVIRONMENT: Operating 15□ C to 30□ C (59□ F to 86□ F) Storage -21□ C to 60□ C (-5□ F to 140□ F) DRIVERS: Windows 95/98/ME, Windows NT/2000 RIP SOFTWARE: Maintop STANDARD PRINT SPEEDS AT 600 DPI: Output in square feet per hour (square meters per hour) 600 dpi with 60” media Draft mode 1 Pass 104 sfph (9.7 smph) Production mode 2 Pass 97 sfph (9.0 smph) Quality mode 3 Pass 84 sfph (7.8 smph) Photo mode 4 Pass 63 sfph (5.9 smph) DIMENSIONS: 2.5m*0.71m*1.12 WEIGHT: 97kg

1.8m MT-Starjet Epson DX5 Printer Over 10 years experience in printing technology The 5th Generation of Micro Piezo Technology Economy, Stability, Comprehensiveness 1. Micro Piezo Printing Technoligy The latest Epson 5th generation Micro Piezo printhead can reach resolution of 1440 dpi. Its extremely fine ink droplets are able to fully reflect the rich detail of the picture, and to fulfill the requirement of one meter viewing range. Suitable for both water based dye and eco-solvent pigment inks. And it can offer one to two years service life. 2. Variable Ink Droplets Technology The variable ink droplets technology can project micron grade ink drops of various sizes. Ink drops between 1.5pl to 21pl. to produce best color results, smooth gradients, and fine details. 3. Progressive Pass Compensation Technology Progressive pass compensation technology is to remove the grinning of white ground or edge overlap (banding ling), which is usually by mechanical inaccuracy and further improve the yield and save the cost. 4. Stochastic Ink-droplet Distribution With the technique, some problems caused by nozzle clog, like white strips. Even with 15% clogged, Starjet series printers can still ensure the printing quality. 5. Multi-Head Arrangement Technology Dual head can double the printing speed. In quad head model, CMYK heads can be replaced separately. This can lower the maintenance cost. User can choose among single head mode, multi-head quality mode and multi-head performance mode to meet all needs. 6. Brand-new mechanical structure It includes a linear guide drive structure, XY axis grating positioning system, multi-channel ink supply system, heating system on both front and rear platform, media absorption system, and automatic printer head service station. Besides, it also has a paper handling system that can bear loads up to 70kg and a frying system composed of eight fans. The machine weighs 220kg in total and 90%of its components are very durable. 7. USB 2.0 bundled with RIP USD 2.0 interfaces supports high speed data transmission and collaborative operation. It greatly enhances the printing performance. Ipint 3 fully complies with ICC color management standard. And it supports automatic image tiling and composition, liner color adjustment and inking management and etc. with the optional PS component, it is also able to process Adobe Postscript files. 8. Wide range of media compatibility The height of the print head is adjustable between 2-5mm, up to 1.9m media in width. Our printers are featuring ink compatibility with ECO solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. Various of media printing ability including, Self-adhesive paper, PVC, Mesh fabric, Textile, PVC flex banner, Adhesive Vinyl, Photo paper, PP, Back light film, Canvas, Non-woven fabric, Chemical fabric, PU leather, Micro fibre, Leather and etc. 9. Easy to maintain & Easy to use Starjet series printers design to meet the high standard of user friendly and operation stability in the industry. It is operability, reliability and durability can compete with any other famous-brand printers in the market. 10. High performance-cost ratio Starjet series printers have world leading performance and almost half the market price to other competitors. Furthermore, the printers are able to cover 1.8 meter printing width, and the components we chose are reliable and long lasting. They are designed to satisfy customers with large yield. Introduction of products: MT-Starjet series large format printers with high resolution use the 5th Generation of Micro Piezo Technology based printer heads. They provide the output with dual CMYK colors, 1.8M printing width, and support Eco solvent based or water based ink, also pigment or dye ink, as well as sublimation ink. They are suitable for the fields of indoor/outdoor advertising, labels and signs, textile printing, decoration, gifts, wedding photos, and so on. MT-Starjet 5 The real leader of large format printer with high-resolution. Perfect combination of quality and performance. 1. Using two of Epson 5th Generation of Micro Piezo printhead, 2880 Print nozzles in total, Arranging in cross. 2. Parallelization technology of multiple printheads. Each print pass covers 2 inches area. 3. Standard mode 22.5m2/h, Draft mode 50m2/h, Twice as faster as competition printers. 4. Technology of Micro Piezo Printing, Variable ink droplets, Progressive Pass Compensation, Stochastic Ink-droplet Distribution. Bundles with RIP, Brand-new mechanical structure, Wide range of media compatibility, High performance to cost ratio. 5. The efficiency of the Starjet 5 printers is twice as that of the competition printers. Starjet 5 printers are very suitable for customers who need to make their volume-printings in short time. Not only reducing the investment of printer, but also lowering the cost of maintenance. Well received by professional users. MT-Starjet 5.0 High printing precision, high stability with competitive price 1. Using one of Epson 5th Generation of Micro Piezo printhead to supply the printings in high quality, enough to contend with many famous-brand printers. With single head, the complex head adjustment can be avoided, and the high print quality can be achieved easily by using Starjet 5.0 printers. 2. Technology of Micro Piezo Printing, Variable in droplets, Progressive Pass Compensation, Stochastic Ink-droplet Distribution. Bundled with RIP, Brand-new mechanical structure, Wide range of media compatibility, High performance to cost ratio. 3. Easy to operate and maintain, easy to calibrate the printhead, more stable printer head service station. 4. Up to 1.8M printing width, Low cost, Suitable for general customers. Product Model MT-Starjet 5.0 MT-Starjet 5 Printing Technology The Epson DX5 Micro Piezo Technology Number of nozzles 1440 nozzles per head 2880 nozzles per 2 head Ink Colors 4colors : Cyan, Magenta, Yellow, Black Printer Head height Adjustable 2~5mm Resolution 1440dpi (Max) Ink droplet size 1.5-21 pl Printing width 1.8 M (Max) Speed High speed Mode: 12 m2/hour High speed Mode: 22.5m2/hour Standard Mode: 7.7 m2/hour Standard Mode: 14.5 m2/hour Photo Mode:5.7 m2/hour Photo Mode:11.2 m2/hour Heating System The heaters for front and center platform separately. PID temperature control Temperature Temperature range: room temperature~80℃ Drying system External fan Media Width: 1.9 M (max media width Media feeding mode: Automatic feeder Automatic take up (optional) self-adhesive paper, PVC, mesh fabric, textile, PVC flex banner, Self Adhesive Vinyl , paper, fabric, leather and etc. Ink T5.5 ECO solvent pigment ink T5.5 ECO solvent Dye ink ST5.5 water based dye ink Ink Supply Mode: Pipe based continues ink supply Ink Cartridge: 8 x 350ml RIP software Photoprint Rip Software Supported Image format: Tiff, Jpeg and other common image formats PostScript file process (Optional) Color Mode: RGB or CMYK Control Software Control Software MT-Starjet5 Control Software (Cn/En) Interface USB 2.0、RS232 Operating System Windows XP Voltage AC 220-240V 50/60HZ or AC 110-120V 50/60HZ Power consumption Power: 1KW (Max), 300W (Printing) Power consumption Ambient temperature: 20-25℃ Humidity Humidity: 40~70 % Non-condensing Dimension Printer Dimension(W x D x H) 2,840 x 900 x 1,250 mm (Bracket Included) Packing Dimension(W x D x H): 3,000 x 930 x 730mm (Bracket Included) Weight Net Weight: 220 kg (Bracket Included) Gross Weight: 300 kg (Bracket Included)