lifting bail, as per API 8C standard. lifting bail, Lifting Capacity: 500 Sh. Tons (4500 KN) Related Standard: API Spec 8C Mechanical Properties: Material: According to API 8C Tensile Strength: St=90N/m2 Yield Strength: Sy=735m2 Impact: 42J (-20 ° C) Elongation: 12% Min lifting

Electrical Specifications Model SPDB-2400-16V60A Frequency Range -MHz 2400-2483 Gain -dBi 16 VSWR ≤1.5 Horizontal Beamwidth-° 60 Vertical Beamwidth-° 15 F/B Ratio-dB ＞25 Polarization Vertical Impedance -Ω 50 Maximum Input Power -W 100 Connector N Female Mechanical

Pulling grip,Support grip,Cable grip, Pulling grip Mesh pulling-grips are used for pulling overhead or underground cable, for stringing service or communications lines into buildings, for pulling wire through conduit, and for general underground construction. Pulling grips may be used for pulling

1). 85*85mm/1, 2 layer aluminum core. 2). Conductivity of dielectric 0.8W/mk-1.0W/mk. 3). 1 oz each layer, 1.28mm thick 4). White solder mask/ No legend 5). Lead free HASL 6). Plated through hole (PTH) 0.8mm 7). layer stack up ------solder mask ------copper 35μm (layer 1) ------dielectric

Appearance(25c):White waxy solid Clarity and color of solution: Non-concentraded, not deeper than 2 # standard solution Average molecular weight: 180-2200 Viscosity:□□3.8-4.8 PH□□value: 5-7 Storage: This product is non-toxic and flame retardant. Regarded as a general shipme

Sizes from 3 7/8" to 26" Covers almost all IADC codes. Stocks adequate&timely delivery Good quality and after-sale service 30 years experience in drill equipment Please specify the following items as many as possible in enquiry: Bit diameter IADC code Bearing type Drilling f