Single Cartridge Mechanical Seals HFDT, Single Cartridge Mechanical Seals/mechanical shaft seals/water pump parts ,
Single Cartridge Mechanical Seals HFDT:
Structure characteristics:
HFDT series mechanical seals have flushing structures, effective protections for external multiple springs, stationary design & balanced type, flushing water pressure is above 0.1MPa more than the impeller side chamber of pumps.
Usable ranges:
Pressure: ≤1.0MPa.
Temperature: -20~100°C.
Linear speed: ≤10m/s.
Medium: abrasion mediums & mediums with solid particles.
Main Applications:
In flue gas desulphurization equipments used in coal-fired power plant, suitable for gypsum slurry bleed pumps, limestone slurry pumps, and gypsum slurry efflux pumps., etc, also suitable for chemical & papermaking industries.
automobile seal HF6C, automobile seal/ car sealing strip/flat gasket,
automobile seal HF6C
1.Feature
operating limited:0~0.6mpa
pressure:0~5000rpm
temperature:-40~150oC
2.material
rotary ring:ceramic/sic/tc
stationary ring:carbon/sic/tc
secondary seal:nbr/epdm/viton
spring and other parts:s.s/sus304/sus316/cu
Single Cartridge Mechanical Seals HFJC, Single Cartridge Mechanical Seals/mechanical shaft seals/water pump parts ,
Single Cartridge Mechanical Seals HFJC:
Structure characteristics:
Easy to install and operate, cartridge mechanical seals, balanced type, independent of direction of rotation, rotary design, external multiple springs, no touch with mediums.
Usable ranges:
Ratio of solid≤30%.
Temperature: ≤120°C.
Pressure: ≤1.6MPa.
Shaft diameter: ≤150mm.
Mediums with high ratio of impurities such as gypsum slurry & limestone slurry.
Main Applications:
In flue gas desulphurization equipments used in coal-fired power plant, suitable for fluid circulation pumps, also suitable for chemical & papermaking industries.
Single Cartridge Mechanical Seals HFJS, Single Cartridge mechanical seal/cartridge mechanical seal/pump seals ,
Single CartridgeMechanical Seal HFJS:
Structure characteristics:
Single cartridge mechanical seals, easy to install and operate, balanced type, independent of direction of rotation, short inboard length. Stationary design & external multiple springs, no touch with mediums.
Usable ranges:
Ratio of solid≤30%.
Temperature: ≤75°C ( can be 150°C in the medium of pure liquids ).
Pressure: ≤1.6MPa.
Shaft diameter: ≤150mm.
Mediums with high ratio of impurities such as gypsum slurry & limestone slurry.
Main Applications:
In side entry mixers of Absorption tower of flue gas desulphurization equipments used in coal-fired power plant, in reaction tower used in chemical papermaking industry. This type can totally replace the mechanical seal of German EKATO mixer.
Mechanical Seal /seal/ pump seal TYPE HFJ318AAP, mechanical seals for pumps/ mechanical seals/doubmechanical sealsle cartridge seals,
Mechanical seals HEJ318AAP:
Feature:
1.The gland is designed with flushing pore, it becomes very easy to cool and flush the mechanical seal.
2.The material of PRC658 high performance carbon ring features low-friction and high heat conductivity.
3.Available in typical API structure, and conforms to API610 and API682.
Technical Parameters:
Max. pressure: 40 kg/cm2.
Max. temperature: 220 (for Viton O-rings)
327 (for Kalrez O-rings)
Speed: less than 25m/s.
Application: Granulated medium
Front water pump
Crystallized medium
Automobile Compressor Seal HFBZR(N)-40, Automobile Compressor mechanical seal/ lip shaft seals/auto air conditioner parts,
Automobile Compressor Seal HFBZR(N)-40
Applications:
Engine water pumps and general purpose light duty circulating pumps.Generally for small diameter rotary shaft applications where high speeds and/or vibration is a factor.
Technical parameters:
1) Temperature: up to 150oC.
2) Pressure: up to 30Mpa.
3) Speed: 30m/s.
4)For Bus and Coach Bus and atuomobile.
Mechanical Seal HF155, water mechanical seal/ pump seals/mechanical seals for industrial,
Mechanical seal HF155:
Application:
The "0"-Ring mounted conical spring seal, with pressed stainless seal,designed to fit common or DIN24960(EN12756) housings,head retainer and pressed carbon seat. Highly productionised seal capable of wide ranging service.Seal and seat faces can be inter-changed with each other and can be easily replaced.
Stationary seats can be selected with G4, G9 ,G6, G60( Standard: ISO3069 and DIN24960.
Technical parameters:
1 Temperature: -60--2MPa.
2 pressure: 0-2Mpa.
3 Speed: 10m/s.
4 Shaft Size: 6~120mm.
