ALTO industrial air source pool heat pump is a new product for heating your swimming pools.
Alto industrial air source pool heat pump features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C .
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection.
Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc.
POOL HEAT PUMP SPECIFICATIONS AS-H500Y
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 56.1 Amps
Min. Circuit Size 100Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 146.5kW 131.9kW
Power input 28.6kW 27.8kW
COP 5.12 4.74
Noise level 70d(B)A at 5m 70d(B)A at 5m
Approx.shipping weight 695kg
Size L*W*H 1120mm*3600mm*1855mm
,Industrial air source pool heat pump(B-500), Industrial pool heat pump
ALTO air source swimming pool heater is a new product for heating your swimming pools.
Alto air source swimming pool heater features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C .
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available.
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection.
Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc
POOL HEAT PUMP SPECIFICATIONS AS-H230Y
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 25.0 Amps
Min. Circuit Size 50 Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 64.8kW 60.3kW
Power input 12.9kW 12.8kW
COP 5.02 4.71
Noise level 64d(B)A at 5m 64d(B)A at 5m
Approx.shipping weight 295kg
Size L*W*H 830mm*1680mm*1105mm
,Commercial swimming pool heater (B-230), swimming pool heater
ALTO commercial air source pool heat pump is a new product for heating your swimming pools.
Alto commercial air source pool heat pump features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C .
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available.
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection.
Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc
POOL HEAT PUMP SPECIFICATIONS AS-H330Y
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 35.1 Amps
Min. Circuit Size 75 Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 90.7kW 81.1kW
Power input 18.1kW 17.2kW
COP 5.01 4.72
Noise level 66d(B)A at 5m 65d(B)A at 5m
Approx.shipping weight 415kg
Size L*W*H 1120mm*1850mm*1855mm
,Commercial air source pool heat pump(B-330), commercial pool heater
ALTO Commercial hot water pool heat pump is a new product for heating your swimming pools.
Alto commercial hot water pool heat pump features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available.
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection
Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc
POOL HEAT PUMP SPECIFICATIONS AS-H600Y
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 65.1 Amps
Min. Circuit Size 100Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 175.8kW 158.0kW
Power input 34.2kW 33.3kW
COP 5.14 4.47
Noise level 72d(B)A at 5m 72d(B)A at 5m
Approx.shipping weight 825kg
Size L*W*H 1120mm*3600mm*2050mm
,Commercial hot water pool heat pump(B-600), Water heater heat pump
ALTO air to water swimming pool heat pump is a new product for heating your swimming pools.
Alto air to water swimming pool heat pump features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C .
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available.
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection.
Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 19.6 Amps
Min. Circuit Size 30 Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 50kW 43.6kW
Power input 10.1kW 9.82kW
COP 4.94 4.44
Noise level 63d(B)A at 5m 63d(B)A at 5m
TECHNICAL DATA
Compressor Fan
Make SANYO WeiGuang
Type Scroll axial
Number per unit 1 1
Voltage/phase 380~415/3 220V/1/50Hz
Pole/RPM 2 830
Air Flow N/A 4000 L/s
Approx.shipping weight 192kg
Size L*W*H 780mm*830mm*1105mm
,Air to water swimming pool heat pump(B-170), air to water heat pump radiator
ALTO Public pool heat pump:
Alto public pool heat pump is the most economical solution to heat the swimming pool efficiently, which maximizes the value and enjoyment. It delivers up to five times more energy in heating than the electricity consumption. Nearly 80% heating energy is from the solar energy in the air which is free of change; and only 20% is from the electricity which needs to be paid. It only consumes 1/2 THE COST OF NATURAL Gas,1/3 the cost of Oil and Propane, and 1/5 the cost of Electric Resistance, that means Alto pool heat pump performs profit while you enjoying your pool.
Alto public pool heat pump features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C.
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available.
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection.
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc.
POOL HEAT PUMP SPECIFICATIONS AS-H330Y
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 35.1 Amps
Min. Circuit Size 75 Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 90.7kW 81.1kW
Power input 18.1kW 17.2kW
COP 5.01 4.72
Noise level 66d(B)A at 5m 65d(B)A at 5m
TECHNICAL DATA
Compressor Fan
Make SANYO WeiGuang
Type Scroll axial
Number per unit 2 2
Voltage/phase 380~415/3 380V/3/50Hz
Pole/RPM 2 830
Air Flow N/A 6000 L/s
HEAT EXCHANGER(water side)
Type of water tube Titanium
Design Tube in shell
Flow Rate 3.2 L/s-9.0 L/s
By Pass(optional) N/A
Max Outlet water temp 45°C
Design Pressure Drop 4kPa-6kPa
Max.Operating Pres. 600kPa
GENERAL INFORMATION
Pool Water 80mm PVC
Drain 25mm collection
Defrost Automatic Hot Gas Injection
Cabinet Construction 316 S/S Top 304 S/S Sides
Approx.shipping weight 415kg
Size L*W*H 1120mm*1850mm*1855mm
,Commercial pool heat pump (BS-330), pool heat pump
ALTO Industrial hot water pool heater is a new product for heating your swimming pools.
Alto Industrla hot water pool heater features:
High efficient compressor, extra large evaporator ,and reliable Emersion expansion valve, contribute a Super-Power refrigeration system with the COP up to 4.9. The pool heat pump equipped with R410a can operate above -5°C and heat the pool water up to 45°C .
Pure titanium heat exchanger ensures complete corrosion resistance ,which enable Alto pool heat pump to be compatible with all types of water treatment, including chlorinate, ozone, iodine, bromine and salt water.
The automated control owns the simple and friendly interface. Set the desired pool water temperature and the heat pump will do the rest. Both panel control and line control(optional) are available
Reversible design incorporates the auto-defrosting function, which eliminates the frost on the evaporator in cold temperature conditions. And it also combines both water heating and water cooling functions together.
Multi protection devices have been built inside for ease of operation and increasing the durability, including the water flow switch, high/low pressure protection, overload protection and compressor protection.
Multi electric protection:Surge protection discharge, Phase sequence protection, Loss phase protection
Abundant optional parts are offered to satisfy customers requirement, including electric heater, soft start, crank heater, chassis base anti-icing device, by pass and winter cover etc
POOL HEAT PUMP SPECIFICATIONS AS-H720Y
Design Reverse Cycle Heat and Cool
ELECTRICAL INPUT
Voltage/phase 380~415Volts /3 /50Hz
Amps Per Phase 81.9 Amps
Min. Circuit Size 150Amps
PERFORMANCE
WINTER(heating) SUMMER(cooling)
Air on conditions 15 °CDB, 12°CWB 24 °CDB, 19°CWB
Entering water temp 27°C 27°C
Normal capacity 212.5kW 185.2kW
Power input 42.2kW 40.3kW
COP 5.03 4.6
Noise level 72d(B)A at 5m 72d(B)A at 5m
Approx.shipping weight 1150kg
Size L*W*H 1120mm*3750mm*2050mm
,Industrial hot water pool heater(B-720), Industrial pool heater
1.Industrial Swimming pool Heat Pump feature
Streamlined design
Elegant stainless steel cabinet
2. Efficient energy-saving for industrial pool heat pump :
High efficient compressor.
Extra large evaporator.
Reliable Emersion expansion valve.
3. Pure Titanium heat exchanger ensures complete corrosion resistance.
Compatible with water treatment: chlorinate, ozone, iodine, bromine and salt water.
4. Automatic intelligent control the industrial pool heat pump Simple and friendly control interface.
VLED color dynamic display screens.
Both panel control and line control (optional) are available.
Self-diagnosis function, displays the fault code automatically.
5. Multi protection for the industrial pool heat pump:
Water flow switch.
High/low pressure protection.
Overload protection.
Compressor protection.
6. Operation mode for the industrial pool heat pump.
Fully automatic operation mode.
Eco-mode
Rapid Thermal Model
7. Auto-defrosting function for the pool heat pump
It also combines both water heating and water cooling functions together.
8. Abundant optional parts for the industrial pool heat pump:
Electric heater
Soft start
Crank heater
Chassis base anti-icing device
By pass and winter cover
9. Scope of application for the industrial pool heat pump
Running environmental temp range:-5oC~35oC
Model AS-H50Y
Refrigerant R407C
Rated Capacity (heating) kw 14.7
Rated Capacity (cooling) kw 12.3
Power Input (heating) kw 3150
Power Input (cooling) kw 3050
C.O.P w/w 4.7
Power supply V/Ph/Hz 230/1/50
Amperage (heating) Amp 14.7
Amperage (cooling) Amp 14
Circuit breaker Amp 30
Compressor Type Scroll
Heat exchanger Type Titanium
Refrigerant Charged g 1600
Noise db(A) ≤58
Water flow m3/h 2.0~5.0
Water Pressure Drop kpa ≤0.4
Water connection inch/cm 1.5/3.81
Pool Volume m3 70~110
Water-Proof grade Type IPX4
Weight kg 70
Dimension (L×W×H) cm 112x48x72
Package (L×W×H) mm 118x54x78
Loading Quantity in 20’FCL Pcs 60
,Industrial pool heat pump(ES-50), pool heat pump
1.Industrial Swimming pool Heat Pump feature
Streamlined design
Elegant stainless steel cabinet
2. Efficient energy-saving for industrial pool heat pump :
High efficient compressor
Extra large evaporator
Reliable Emersion expansion valve
3. Pure Titanium heat exchanger ensures complete corrosion resistance
Compatible with water treatment: chlorinate, ozone, iodine, bromine and salt water.
4. Automatic intelligent control the industrial pool heat pump Simple and friendly control interface.
VLED color dynamic display screens
Both panel control and line control (optional) are available
Self-diagnosis function, displays the fault code automatically
5. Multi protection for the industrial pool heat pump:
Water flow switch
High/low pressure protection
Overload protection.
Compressor protection
6. Operation mode for the industrial pool heat pump
Fully automatic operation mode
Eco-mode
Rapid Thermal Model
7. Auto-defrosting function for the pool heat pump
It also combines both water heating and water cooling functions together.
8. Abundant optional parts for the industrial pool heat pump:
Electric heater
Soft start
Crank heater
Chassis base anti-icing device
By pass and winter cover
9. Scope of application for the industrial pool heat pump
Running environmental temp range:-5oC~35oC.
Model AS-H60Y
Refrigerant R407C
Rated Capacity (heating) kw 20.5
Rated Capacity (cooling) kw 17.7
Power Input (heating) kw 4370
Power Input (cooling) kw 4150
C.O.P w/w 4.7
Power supply V/Ph/Hz 230/1/50
Amperage (heating) Amp 20.2
Amperage (cooling) Amp 19.2
Circuit breaker Amp 50
Compressor Type Scroll
Heat exchanger Type Titanium
Refrigerant Charged g 1700
Noise db(A) ≤60
Water flow m3/h 3.0~6.0
Water Pressure Drop kpa ≤0.4
Water connection inch/cm 1.5/3.81
Pool Volume m3 100~150
Water-Proof grade Type IPX4
Weight kg 75
Dimension (L×W×H) cm 112x48x72
Package (L×W×H) mm 118x54x78
Loading Quantity in 20’FCL Pcs 60
,Industrial swimming pool heat pump(ES-60), swimming pool heat pump
1.Industrial Swimming pool Heat Pump feature
Streamlined design
Elegant stainless steel cabinet
2. Efficient energy-saving for industrial pool heat pump :
High efficient compressor
Extra large evaporator
Reliable Emersion expansion valve.
3. Pure Titanium heat exchanger ensures complete corrosion resistance
Compatible with water treatment: chlorinate, ozone, iodine, bromine and salt water.
4. Automatic intelligent control the industrial pool heat pump Simple and friendly control interface.
VLED color dynamic display screens
Both panel control and line control (optional) are available
Self-diagnosis function, displays the fault code automatically
5. Multi protection for the industrial pool heat pump:
Water flow switch
High/low pressure protection
Overload protection.
Compressor protection
6. Operation mode for the industrial pool heat pump.
Fully automatic operation mode
Eco-mode
Rapid Thermal Model
7. Auto-defrosting function for the pool heat pump
It also combines both water heating and water cooling functions together.
8. Abundant optional parts for the industrial pool heat pump:
Electric heater
Soft start
Crank heater
Chassis base anti-icing device
By pass and winter cover
9. Scope of application for the industrial pool heat pump
Running environmental temp range:-5oC~35oC.
Model AS-H85Y
Refrigerant R407C
Rated Capacity (heating) kw 25
Rated Capacity (cooling) kw 22.1
Power Input (heating) kw 5290
Power Input (cooling) kw 5050
C.O.P w/w 4.7
Power supply V/Ph/Hz 380/3/50
Amperage (heating) Amp 10.3
Amperage (cooling) Amp 9.8
Circuit breaker Amp 30
Compressor Type Scroll
Heat exchanger Type Titanium
Refrigerant Charged g 1800
Noise db(A) ≤62
Water flow m3/h 4.0~8.0
Water Pressure Drop kpa ≤0.4
Water connection inch/cm 1.5/3.81
Pool Volume m3 120~180
Water-Proof grade Type IPX4
Weight kg 128
Dimension (L×W×H) cm 112x48x96
Package (L×W×H) mm 118x54x106
Loading Quantity in 20’FCL Pcs 40
,Industrial high efficiency pool heat pump(ES-85), high efficiency heat pump
ALTO Air Source Swimming Pool Heat Pump is the ideal solution to heat your swimming pool.It delivers up to five times more energy in heating than the electricity consumption.Nearly 80%heating energy is from the solar energy in the air and only 20% is from the electricity which needs to paid. It only consumes 1/2 the cost of natural gas,1/3 the cost of oil and propane,and 1/5 the cost of electric resistance, that means ALTO Air Source Swimming Pool Heat Pump performs profit whileyou enjoying your pool
Versions of Air Source Swimming Pool Heat Pump
- 11.7 Kw,COP 4.78
1. Reliable Components
Famous brand compressor
TOSHIBA, HITACHI, SANYO, DAIKIN, MITSUBISHI and COPELAND
Extra large evaporator
Pure Titanium heat exchange heater ensures complete corrosion resistance.
Reliable EMERSION expansion valve
2. Reversible Design
Extrinsic feature
Streamlined design
Elegant plastic cabinet (it can be painted with different colors)
3. Simplified and Easy Operation
Automatic intelligent control
Simple and friendly control interface
VLED color dynamic display screens
Both panel control and line control (optional) are available
Self-diagnosis function, displays the fault code automatically.
4. Multi Protection
Auto-defrosting function
Water flow switch
High/low pressure protection
Overload protection
Compressor protection
5. Safe and Green
Environmentally-friendly and safety refrigerant R410a and R407c
Less CO2
6. Various Operation Mode
Fully automatic operation mode
Eco-mode
Rapid Thermal Model
Matching 6kw auxiliary heating device
7. Abundant optional parts
Electric heater
Soft start
Crank heater
Chassis base anti-icing device
By pass and winter cover
Air Source Swimming Pool Heat Pump - 6.6Kw to 35Kw,COP 4.7 Specification
Specification
AS-H40Y
Deliver Power (kw)
11.7
Consume Power (kw)
2.45
COP
4.78
Pool Volume (m3)
50~80
Water Flow (m3)
1.0~3.0
Scope of application: Running environmental temp range:-5°c~35°c
,Swimming Pool Heat Pump(V-40), air souce heat pump
Industrial air source pool heat pump(B-500)
