Model CTS02DJ CTS03DJ
Internal Volume(L) 200 300
Internal dimensions(D*W*H)cm 67*65*46 67*95*46
External dimensions(D*W*H)cm 76*50*80 80*65*100
Performance
High temperature area Preheating temperature range: +60…+200℃
Heating time: +30…+200≤45 min.
Low temperature area Pre cooling temperature range: -75…0℃
Cooling time: +30…-75℃≤80 min.
Working area Thermal shocking range: (+60…+150) ℃…(-55…-10)℃
Temp fluctuation: ≤1.0℃
Temp deviation: ≤±3.0℃
Conversion time ≤15 s.
Temperature recovery time ≤5 min.
Sample weight 7.5kg, plastic package, IC uniform stress 10kg, plastic package, IC uniform stress
Three temperature area High temperature+150℃, exposure for 30 min.□ambient temperature for 5 min.□low temperature -55℃, exposure for 30 мин.
Two temperature area High temperature +150℃, exposure for 30 min.□low temperature -55℃, exposure for 30 min.
Materials
Shell Cold rolled sheet steel, spray plastics on surface
Interior Stainless steel
Thermal insulation material Polyurethane foam
Refrigeration system
Refrigeration mode Mechanical compression, two-stage refrigeration
Compressor Imported enclosed compressor
Cooling mode Air cooling
Heater stainless steel armored heater
Blower Centrifugal blower
Observation window(mm) 480*330
Temperature sensor Pt100
Controller Touch screen, parameter and program control
Power supply АС380V, 50Hz, Three-phase four-wire + earth wire
Power (kW) 32 45
Safety devices Over temp protector, fuel lean/ overpressure/ overload/ broken circuit protection of compressor, overload protection of blower, phase sequence protection, earth leakage protection, water shortage protection
Standard parts Testing hole (50mm) 1 pc., plug, lamp 1pc.
Optional parts Remote monitoring computer and software, printer, special testing hole, special shelf, added cudgel
,Thermal shocking testing chamber (3 areas), testing maxhine
Internal Volume (m3)*1 8 10 12 15 20
Internal dimensions(D*W*H) 2000*2000*2000 2000*2000*2500 2500*2000*2500 2500*2000*3000 2500*2000*3000
Temperature Control mode Balanced temperature & (humidity) control -----BT(H)C
Working temperature range +5…+35℃
Thermal insulation material and structure Colored steel plates, spray plastics□joint structure with stainless steel plates
Performance
Temperature range +100…-70℃ (-60℃, -40℃, -20℃)
Temp fluctuation ≤1.0℃
Temp uniformity
≤2.0℃
Temp deviation ±2.0℃
Humidity range*3 25%...98%%RH
Humidity deviation*3 +2%...-3%RH(humidity＞75%RH), ±5.0%RH(humidity＜75%RH)
Heating time +25℃…+100℃≤80min.
Cooling time +25℃…Ultimate low temperature≤60min….120min (parameter is different with different model and configuration)
Refrigeration system
Refrigeration mode Minimum temperature≥-20℃, mechanical compression, one-stage refrigeration; minimum temperature≤-40℃, mechanical compression, two-stage refrigeration
Compressor Imported enclosed compressor/ semi-enclosed compressor
Refrigerant R404A or R404A/R23
Cooling mode Water cooling
Heater Nickel-chromium alloy heating wire
heater*3 stainless steel armored heater (steam humidification/water plate humidification)
Blower Centrifugal blower
Temperature sensor Pt100
Controller Touch screen, parameter and program control
Power supply АС380V, 50Hz, Three-phase four-wire + earth wire
Power (kW) 20kW…60kW (parameter is different with different model and configuration)
Safety devices Over temp protector, overpressure/ overload/ broken circuit protection of compressor, overload protection of blower, oil pressure protection, water shortage protection, phase sequence protection, earth leakage protection,
Standard parts Observation window, testing hole, time accumulator, lamp 1pc
Optional parts Remote monitoring computer and software, printer, sloping bench for carrying
Internal Volume (m3)*1 22 25 30 35 40
Internal dimensions(D*W*H) 2500*2500*3600 2500*2500*4000 3000*2500*4000 3000*2500*4600 3000*2500*4000
Temperature Control mode Balanced temperature & (humidity) control -----BT(H)C
Working temperature range +5…+35℃
Thermal insulation material and structure Colored steel plates, spray plastics□joint structure with stainless steel plates
Performance
Temperature range +100…-70℃ (-60℃, -40℃, -20℃)
Temp fluctuation ≤1.0℃
Temp uniformity
≤2.0℃
Temp deviation ±2.0℃
Humidity range*3 25%...98%%RH
Humidity deviation*3 +2%...-3%RH(humidity＞75%RH), ±5.0%RH(humidity＜75%RH)
Heating time +25℃…+100℃≤80min.
Cooling time +25℃…Ultimate low temperature≤60min….120min(parameter is different with different model and configuration)
Refrigeration system
Refrigeration mode Minimum temperature≥-20℃, mechanical compression, one-stage refrigeration; minimum temperature≤-40℃, mechanical compression, two-stage refrigeration
Compressor Imported enclosed compressor/ semi-enclosed compressor
Refrigerant R404A or R404A/R23
Cooling mode Water cooling
Heater Nickel-chromium alloy heating wire
heater*3 stainless steel armored heater (steam humidification/water plate humidification)
Blower Centrifugal blower
Temperature sensor Pt100
Controller Touch screen, parameter and program control
Power supply АС380V, 50Hz, Three-phase four-wire + earth wire
Power (kW) 20kW…60kW (parameter is different with different model and configuration)
Safety devices Over temp protector, overpressure/ overload/ broken circuit protection of compressor, overload protection of blower, oil pressure protection, water shortage protection, phase sequence protection, earth leakage protection,
Standard parts Observation window, testing hole, time accumulator, lamp 1pc
Optional parts Remote monitoring computer and software, printer, sloping bench for carrying
,Walk-in test chamber, testing machine
auto parts
