Shoes Flexing Tester
To determine shoe flexibility and cracking resistance because of flexing movement in specific degree/speed
It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
Specimen 2paris（4pieces）UK size for children’s shoe 4~13;for adult`s:1~12
Flexing Angle 10°,15°,20°,25°,30°,45°,50°,60°,90°（Adjustable）
Counter LCD,0~99,999,999
Dimension（W×D×H） 95×56×63 cm
Weight 267kg
Power 1∮,AC220V,3A
,Shoes Flexing Tester;test;instrument;Leather instrument
Elemendorf Tear Tester
The tearing strength of fabrics, papers, plastic films, or other similar materials is determined by measurement of the work done in tearing through a fixed length of the test specimen using Elemendorf Tear Tester.
The Elemendorf Tear Tester consists of a brass sector pendulum pivoted on anti-friction ball bearings on a vertical bracket fixed on a rigid metallic base. The test specimen is in shape of a rectangle and is held between two clamps, one of which is mounted on the pendulum and the other is mounted on the vertical bracket. The clamps are mounted in such a manner that their holding faces are aligned with each other when the pendulum is locked in its raised position. The pendulum is released by lifting the release lever. This action causes the test specimen to tear right through. The tearing strength is indicated on a scale fitted on the pendulum against a low friction pointer pivoted on the same axis as the pendulum.
An adjustable knife is mounted on the bracket on which the pendulum and the fixed clamp is mounted. The blade is located between the two clamps and is used for making the initial slit in the test specimen. A brass check weight is supplied with the tester for verification of its calibration. The apparatus is finished in blackmalt finish and bright chrome plating to give it a corrosion resistant finish.
Augmenting weights for increasing the capacity of the tester are available as optional accessories. For testing of low strength materials, multiple specimens may be mounted at the same time.
TECHNICAL DATA :
Capacity
1600 g (can be increased to 3200 g or 6400 g by adding augmenting weights.
Clamping Surfaces of each clamp
36 mm wide x 16mm high.
Distance between clamps
2.8 mm
Tearing Distance
43 mm
Scale reading
0 to 100% of range.
RELATED STANDARDS :
IS 6489 □ 1971
Method for Determination of Tear Strength of Woven Textile Fabrics by Elemendorf Tester.
ASTM D 689-1979
Standard Test Method for Test for Internal Resistance of paper.
ASTM D 1424 - 1983
Standard Test Method for Tear Resistance of Woven Fabrics by falling Pendulum (Elemendorf) Apparatus.
ASTM D 1922 - 1967
Standard Test Method for Propagation of Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method.
,Elemendorf Tear Tester;textile instrument;testing machine
Dry Testing Machine
It is used for testing external colour and size alteration of various textiles, knitting fabrics and hot-meltbonded linings after they were washed by organic solvent and alkali solvent.
Standards FZ/T01083-1999, FZ/T01013-1991, FZ80007.3-1999, ISO3175.1-1:1998, ISO3175.1-2:1998 and so on
. Working Pattern Continuous revolution or crawl by timing and readout by digital.
Capacity of Washtubs 11.4L
Speed 47±3r/min
Revolving Axle Tilt Angle 50±1°
Working Time 0-30min
External Dimensions 1050x580x800mm
Weight 100kg
Power Source Ac220V , 50Hz
,Dry Testing Machine;textile instrument;tester
Vertical Flammability Tester
Flammability of fabrics may be determined by igniting one end of fabric under test by mean of a suitable burner having a specified flame intensity and determining the extend of propagation of flame and the time taken by the flame to propagate between two marked levels. In the vertical strip flammability tester, a test specimen cut from the fabric under test is suspended vertically inside an enclosure and the flame from a Bunsen burner is applied at its bottom edge. The time taken by the flame to propagate between two specified marks is then determined from which the numerical rating of flame resistance property found. This method is suitable for all fabrics which are in form of sheets or can be converted by cutting into sheets.
Flammability Tester for fabrics consists of a vertical sheet metal cabinet closed on three sides and top and bottom. The front side is kept open for insertion of the test specimen. The test specimen is suspended from a clip such that it hangs freely in the center of the cabinet. Two marker wires are fixed behind the fabric under test such that they are located 28 cm and 155 cm below the clip. A removable auxiliary clip is also provided to enable shorter specimens of flame resistant fabrics to be tested.
A bunsen burner of 9.5 mm diameter opening is placed in the lower half of the cabinet and can be moved on two guide rods to enable it to be brought vertically below the free end of the test specimen. A flexible pipe line with a needle valve is provided to control the flame height.
TECHNICAL DATA
Size of Test Specimen
183 cm x 4 cm
Size of modified test specimen
40 cm x 4 cm
Distance of upper marker wire from the main clip
28 cm
Distance of lower marker wire from the main clip
155 cm
Distance of lower marker wire from the auxiliary clip
10 cm
Diameter of burner opening
9.5 mm
Dimensions of the Cabinet
35 cm x 40 cm x 205 cm
,Vertical Flammability Tester;textile instrument;testing machine
Perspirometer
Colour Fastness of dyed or printed fabrics against perspiration is determined by exposing the fabric sample to the action of both alkaline and acidic reagents while in contact with undyed adjacent fabrics is placed between plastic plates under a fixed load inside an oven maintained at 370 centigrade. The apparatus used for this test is called the Perspirometer.
consists of a number of acrylic plates and which can be kept in suitable loading frame. The loading frame consists of two steel plates between which the acrylic plates placed. The test specimen are stitched between suitable white cloth pieces and dipped in either alkaline or acidic test solutions. The composite sample is placed in between any two acrylic plates. A number of test specimens can be loaded simultaneously between different sets of acrylic plates by stacking them one above the other. Loading is done by keeping a standard dead weight on top of the upper plate assembly, which consists of two parallel plates separated by suitable compensating springs. The guide rod attached to top plate of this assembly is locked while under load and the load removed. The springs compensate for subsequent variations in load due to variation in thickness of the test specimens on drying.
The test is continued for the required time under the specified condition of temperature. After this the samples are removed from the frame and dried. The degree of staining of the while pieces of cloths and change in colour of the test specimens are evaluated using Grey Scales and compared against standard rating cards.
All the components are made of stainless steel and are finished in black stoving enamel paint to give them a corrosion resistant finish.
RELATED SPECIFICATIONS :
IS 1971 - 1983
Method of Determination of Colour Fastness of Textile materials to Perspiration.
AATCC 10
Method of Test for Colour Fastness to Perspiration.
,Perspirometer,Instruments, Tester;Textile instruments;testing machine
Digital Fabric Pick Counter
Digital Fabric Pick Counter is used to determine the thread density of woven fabrics
and loop density of knitted fabrics. Equipped with a portable high-precision camera to capture
and magnify pictures of fabrics, the number of threads or loops on captured pictures can be
counted easily on the screen of the computer by the software
STANDARDS
GB/T 4668
ISO 7211.2
ASTM D3775
l Magnification of the camera 20×~400×
l Specimen Woven fabrics, knitted fabrics
l Measuring direction Vertical/Horizontal
l Counting direction Warp-wise/Weft-wise
l Display mode Thread/10mm and thread/inch
l Mode of storing results In text files
,Digital Fabric Pick Counter;textile instrument;testing machine;testing equipment
Rotawash Washing Fastness Tester is used for determining colour fastness of textile materials to washings. This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap □ soda solution. Before being rinsing and dried. The change in colour of specimen and stains of the adjacent fabrics are assessed with standard Grey Scale.
WASHING FASTNESS TESTER’ consists of a thermostatically controlled, electrically heated water bath made of Stainless Steel. The bath is heated by means of immersion heaters and its temperature controlled by a capillary type thermostat. The temperature of water inside the bath is displayed on a digital temperature indicator. The bath has a double walled hinged lid made of stainless steel sheets.
The jars in which the test solution and the test specimens are kept during the test are made from stainless steel and are provided with rubber scales for water tight closing. They are held in a cast stainless steel rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating about a horizontal axis with the help of a geared Motor. A clockwork timer is provided to stop the motor after a pre-determined time. The apparatus is fabricated on a sturdy angle iron frame and is completely enclosed on all four sides with mild steel sheet duly enameled in metallic green paint. The top of the apparatus is covered with stainless steel sheet.
One hundred stainless steel balls of 6 mm diameter are supplied with the apparatus as standard accessory for providing beating action during the washing operation. Extra stainless steel balls and standard Grey Scales are available as optional accessory.
TECHNICAL DATA :
Number of Jars
Eight
Volume of each Jar
550 cc (Approx)
Distance of base jars from the axis of rotation
50 mm
Speed of rotation
40 to 45 rpm.
Temperature of Water Bath
Ambient of 980 C
Motor
□ HP 230 V AC.
RELATED STANDARDS :
IS 687 □ 1979, 764 - 1979, 765 □ 1979, 3417 □ 179, 3417 □ 179, Method of determination of Colour fastness of textile materials to washing : Test1, Test2, Test 3, Test 4 and Test 5 respectively.
,Rotawash Washing Fastness Tester;Instruments;textile instrument;testing machine
Crockmeter Electronic SL-F36
