Products Aluminium Cut Wire Shot
Chemical Composition Al≥99%
Microhardness 45～50HV
Tensile Intensity 80～240Mpa
Durability 6500 Times
Microstructure Deformed α
Density 2.7g/cm3
Bulk Density 1.5g/cm3
Application: It is used for removing oxidation skin,burr,eliminating surface defect,removing stress,etching,unknit,strengthen,prevention rust before painting of metal die-casting,precision casting,hardware tool,machinery manufacturing,automobile spare parts,apparatus,pump valve industry.
Packing Types:braided bag packing,flexible container packing,stock packing,paper bag packing,barrel packing:25kg/bag 1t/stock 900kg/barrel 1t/bag
,Aluminium Shot, Aluminium Shot
Products Zinc Cut Wire Shot
Chemical Composition Zn≥99%
Microhardness 45～50HV
Tensile Intensity 90～120Mpa
Durability 6000 Times
Microstructure Deformed α
Density 7.1g/cm3
Bulk Density 4.1g/cm3
Application:
It is used for removing oxidation skin,burr,eliminating surface defect,removing stress,etching,unknit,strengthen,prevention rust before painting of metal die-casting,precision casting,hardware tool,machinery manufacturing,automobile spare parts,apparatus,pump valve industry.
Packing Types:braided bag packing,flexible container packing,stock packing,paper bag packing,barrel packing:25kg/bag 1t/stock 900kg/barrel 1t/bag
,Zinc Shot, Zinc Shot
This series belongs to roller shot blasting machine. It mostly applies in the line of architecture, bridge which is used for relieving of stress and wiping surface rust of large girder shaped steel, H-shaped steel and other large dimension steels.
Parameter Unit QH698 QH6912 QH6915 QH6918
The effective cleaning width mm 800 1200 1500 1800
The size of feed inlet mm 1000 x1500 1400 x1700 1700 x1700 2000 x1800
The length of cleaning workpiece mm 1200-12000 1200-13000 1500-13000 2000-13000
Cleaning workpieces size mm 800 x1200 1200 x1500 1500 x1500 1800 x1600
Transportation speed(Stepless speed regulation) m/min 0.5-4 0.5-4 0.5-4 0.5-4
The quantity of shot blasting kg/min 8 x125 8 x180 8 x180 8 x250
The first enclosed quantity kg 4000 5000 5000 6000
Total airrate volume 20000 220000 25000 25000
Total power(except for dust cleaning) kw 90 130 180 180
,QH69 series H-shaped steel of shot blasting machine, shot blasting machine
This series for the hanger type shot blasting cleaning machine, is mainly used for casting. structural, non-ferrcus alloy parts and other parts of the surface cleaning, shot blasting cleaning machine of this series at a single hook, double hook-type, lifting and not lifting style and many other models. It has the advantages of no pit, compact structure, and high productivity.
Parameter Model Cleaning workpieces size diameter x height The carrying capacity of unit hook kg
Q375 Single-hanger 500x1000 500
Q376 Single-hanger 800x1200 600
Q376E Double-hanger 800x1200 600
Q378 Single-hanger 1000x1500 800
Q378E Double-hanger 1000x1500 800
Q3710 Single-hanger 1200x1500 1000
Q3710E Double-hanger 1200x1500 1000
Q3720 Single-hanger 1500x2000 2000
Q3730 Single-hanger 1500x2000 3000
Q3750 Single-hanger 2000x2500 5000
,Q37 series overhead rail spinner hanger shot blasting machine, shot blasting machine
This series is used for surface cleaning, rust romoving, and surface intensification of each kind of middle and small scale casting, forging and so on. It is suitable for diffenent production scale, can be stand-alone use and many units can also be used in conjunction with the continuous conveyor components, composing the production of clean-up lines.
Q32 series abrade cleaning up machine has the advantages of advanced design, reasonable structure small energy consumption and high efficiency.
Parameter Unit Q326 Q3210 QR3210
Productivity T/h 0.6-1.2 3-5 1.5-2.5
Loading weight kg 200 800 600
The maximum weight of one piece kg 10 150 30
Diameter of roller mm 650 1000 1000
Available capacity 0.15 0.4 0.3
Pill impelling volume kg/min 100 250 250
Dedusting air volume 2200 6000 5000
Power dissipation kw 12.6 32.6 24.3
Appearance dimension mm 3681x1650x5800 3644x2926x5856 3972x2600x4768
Machine total weight kg 2340 7400 5843
,Q32 series tumble belt type shot blasting machine, shot blasting machine
The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process. It applies to shipping, car, motorcycle, bridge, machine etc. which is in the line of steel board, section and structure casting to wipe of surface rusting and painting art.
Parameter Unit Q698 Q6912 Q6915 Q6920
The effective cleaning width mm 800 1200 1500 2000
The room feed-in size mm 1000 x400 1400 x400 1700 x400 2200 x400
The length of cleaning work piece mm 1200-12000 1200-1600 1200-12000 1200-12000
The speed of wheel conveyer(stepless speed variation) m/min 0.5-4 0.5-4 0.5-4 0.5-4
The thickness of cleaning steel sheet mm 3-60 3-60 1.5-60 3-60
The section steel specification mm 800 x300 1000 x300 1500 x300 2000 x300
The quantity of shot blasting kg/min 4 x180 4 x250 4 x250 6 x250
The first enclosed quantity kg 4000 4000 4000 4500
Roll brush adjusting height mm 200 200 350 450
Airiness capacity 22000 17560 19000 19550
Exterior size mm 25017x4500 x9015 12180 x4250 x7095 15200 x5370 x6797 30650 x6850 x9095
Totalpower
except for dust cleaning kw 90 78.3 113.5 156.6
,Q69 series steel profiles shot blasting machine, shot blasting machine
This series is used for removing the sand and the oxided surface of the workpieces such as the casting, forging as well as the weldment. Owing to the perfect protective measures, good shot blasting, a reasonable structure of the circulatory system, the machine can achieve satisfactory results when it was used to clean up the hard-to-clean ports. This kind of machine can also be used to clean up the workpieces which are easy to roll and fall and also be used to clean up the non-fragile parts as well as the non-core castings.
The aluminium workpieces and some nonferrous metal workpieces can also be cleaned up by this series.
Parameter Unit Q15GN tumble belt type shot blasting machine Q28GN tumble belt type shot blasting machine
Size of the roller mm 1090 x1245 1245 x1778
Diameter of roller mm 1092 1250
Working cubage 0.43 0.79
Unit piece weight kg 227 363
Size of workingpiece mm 1000 1000
Loading weight Kg/barrel 800 3500
Pill impelling volume kg/min 480 340 x2
Impeller head power kw 22 30
,Q15GN/Q28GN series tumble belt type shot blasting machine, shot blasting machine
The series of QG inner and outer wall special shot blasting machine for surface treatment, wiping up the oxide coating, welding slag, appearing the metallic sheen, increasing the area of the surface, which is in favor of UV. It applies in the line of petroleum & chemical, steel, city centralized heating, centralized drainage ect.
Type Cleaning size (mm) Cleaning speed (m/min) Purposes(mm)
QGW100 50-300 2-10
Outer wall of shot blasting machine
QGW720 159-720 2-6
QGW1200 219-1016 1-6
QGW1500 325-1600 1-6
QGW2800 1016-2800 1-2
QGN100 50-300 1-4
Inner wall of shot blasting machine
QGN700 325-720 1-2
QGN1000 720-1016 1-4
QGN1500 1016-1500 1-4
,QG series inner and outer wall special shot blasting machine, shot blasting machine
Products Copper Cut Wire Shot
Chemical Composition Cu:58-99%,余Zn
Microhardness 110～300HV
Tensile Intensity 200～500Mpa
Durability 5000 Times
Microstructure Deformed α or α+β
Density 8.9g/cm3
Bulk Density 5.1g/cm3
Application: It is used for removing oxidation skin,burr,eliminating surface defect,removing stress,etching,unknit,strengthen,prevention rust before painting of metal die-casting,precision casting,hardware tool,machinery manufacturing,automobile spare parts,apparatus,pump valve industry.
Packing Types:braided bag packing,flexible container packing,stock packing,paper bag packing,barrel packing:25kg/bag 1t/stock 900kg/barrel 1t/bag
,Copper Shot, Copper Shot
The centrifugal ventilator 4-79 Type are normaly used in Factory and big buildings to ventilate and export air, in the air there is no impurities and hard substance that is 150mg/m3,temperature is not more than 80C. blower,air blower,centrifugal blower The performance and components Type 4-72 are same as the Type 4-72. Choose motor Type YB serial Modeblower,air blower,centrifugal blower From the view of motor side, the ventilator which vane wheel rotates clockwisely is call right-rotation indicated with " Right"; left-rotation indicated with "Left"blower,air blower,centrifugal blower There are five driving modes A,B,C,D,E. In the ventiltor Type 4-72, No.2.8-6 adopts driving mode A; NO. 8-12 C,D, No.16-20 B.Ventilator structureblower,air blower,centrifugal blower entilator Type T4-79 consists mainly of vane wheel, ventilator shell, inlet draught. No. 8-No.20 have such components same as mentioned as No. 2.8-6, additional driving components.
1,Vane wheel consists of ten back-bent vanes, front disc and flat back plate, having better performance such as high efficiency, stable runing, etc. blower,air blower,centrifugal blower .
2,The inlet draught is installed at the side of ventialtor, having a curve-shape section parallel to axis, so that air can enter into vane wheel smoothlly with little loss.blower,air blower,centrifugal blower 3Driving part consists of spindle,gearbox, belt wheel or shaft couple.blower,air blower,centrifugal blower
,4-72 centrifugal blower, 4-72 centrifugal blower
Aluminium Shot
