The Belt conveyer consist of standard parts, which are advanced and simple in structure, easy to maintain. Our Belt conveyer equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. According to different transferring equipment, the transfer system can be one independently or multi-conveyers or combined with other transfer equipments. The belt conveyer can be installed horizontally or aslope to meet the needs of different transfer lines.
The belt conveyers produced by SJLC can be operated in the circumstance temperature range from minus twenty degrees centigrade to centigrade forty. The temperature of transferred material by this belt conveyer should be lower than fifty centigrate.
The types of the belt conveyers produced by SJLC are as follows:
1. Devided by Driving Method:
a. STD-Mechanical Drive
It's driven by cycloidal pinwheel reducer (with outdoor motor ) and chain-drive mechanism.
b. STDJ II Mechanical Drive Series .
It adopts upside-down reducer and belt-drive mechanize.
c. STD-Electric Rotor Drive Series
It's driven by electric rotor.
2. Divided by Installation Methods
a. Fixed Series
It's directly installed on foundation.
b. SDY-Portable Series
It's equipped with type for moving and slope adjusting capability, It can be Easily, it can be reely moved and adjusted by different transfer requirements
3. Divided by Structures:
The belt conveyers produced by SJLC have three different structures.
There are two kinds of conveyers, one equipped with repairing walkway while the other without. When ordering the machine, the customers should give us clear instruction.,Belt Conveyer, Belt Conveyor(firstname.lastname@example.org), Belt conveyer, conveyer, conveying machine, belt conveyor,Belt , conveying equipment,Belt Conveyer, belt conveyor,transport equipment,Conveyor belt
The hammer crusher (hammer mill) crushes by the collisions between high-speed hammer and materiasl, and the hammer crusher (hammer mill) features in its simple structure, high reduction ration, high efficiency, etc. The PC hammer crusher (hammer mill) was developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
Operating principle of Hammer Crusher:
In the hammer mill machine, the motor drives the rotor rotate at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area by the hammers for being recrushed until they reached the required size.
Model : PC400×300
Max feed size (mm) : 30
Handing capacity (t/h): 5 - 8
Power of motor (Kw) : 11
Weight (t) : 1.5
Model : PC600×400
Max feed size (mm) : 100
Handing capacity (t/h): 10 - 15
Power of motor (Kw) : 18.5
Weight (t) : 3
Model : PC800×600
Max feed size (mm) : 150
Handing capacity (t/h): 20 - 25
Power of motor (Kw) : 55
Weight (t) : 7
Model : PC800×1000
Max feed size (mm) : 280
Handing capacity (t/h): 20 - 50
Power of motor (Kw) : 110
Weight (t) : 12
Circuit Type hammer mill:
Model : PCH0606
Max feed size (mm) : 200
Handing capacity (t/h): 18 - 30
Power of motor (Kw) : 30
Weight (t) : 17
Model : PCH0808
Max feed size (mm) : 250
Handing capacity (t/h): 30 - 50
Power of motor (Kw) : 45
Weight (t) : 29
Model : PCH1010
Max feed size (mm) : 300
Handing capacity (t/h): 45 - 80
Power of motor (Kw) : 90
Weight (t) : 52
Notice: Any change of technical data shall not be advised additionally.
Also,our company produces other mining machines and construction machines.Such as:jaw crusher, impact crusher,hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry!
,Hammer Crusher,hammer mill, Hammer Crusher,hammer mill,crusher,crushing machine,rock crusher,stone crusher,hammer breaker, breaker, pulverizer, stone-breaker, Mineral crushing & grinding plants,mill,pulverisers,crushers for sale,hammer crusher price
High pressure micropowder mill is of high efficiency like air current mill, as high pressure micropowder mill is developed basing on our engineer’s long time research on the industrial mills and hydrodynamics theory, thus high cost of application of air current mill in our country ends. The high pressure micropowder mill is mainly used to grind and crush the ordinary non-explosive and non-inflammable materials with Mohs hardness below 6 and moisture blow 8%, like kaolin, limestone, calcite, marble, barite, gypsum, ferric oxide, aluminum hydroxyde, paint, porcelain clay, coal, active carbon, etc.
The price is only one eighth of that of air current mill, under the same capacity and same size of final product, while its application range is larger than air current mill. The pressure from rollers to materials is increased by 800-1200Kg with the function of high pressure spring, and the power consumption is one third of air current mill. The feeding size is big, and the size of final product can reach < 6.5um super fine powder directly. The eclipsed form multipole seal device keeps the mills in good airproof condition.
,High Pressure Micro Powder Grinder Mill, High pressure micro powder grinder,grinder,mill equipment,grinding machine, micro powder grinder, grinder mill, grinding mill, roller mill,grinder accessories,dry and wet grinder,rocky grinder,attritor,grinder mill,grinding mill,grinder price
Impact Crusher is mainly used to crush many kinds of large, medium, small materials such as rock or stone whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. The impact crusher is widely used in hydroelectricity, highway, artificial rock, stone and sand, building material, etc.
Working Principle of Impact Crusher:
When the impact crusher works, the motor drives the rotor rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed to the required size and then discharged from outlet.
The main features of impact crusher:
1.Connected with locking sleeve assembly.
2.Final product with cubical shape.
3.The blow bar with high chrome.
4.Easy maintenance. Hydraulic or hand opening.
5.Reliable operation. Impact plate with a special shape.
Max Feed Size(mm):<500
Any change of technical data shall not be advised additionally. ,Impact Crusher,Impactor, crusher,impactor,impact machine,impact crusher,crusher,stone crusher, mining machine, stone-breaker, rock crusher,Mineral crushing & grinding plants,crushers for sale,impact crushing,impact pulverizer,impact crusher manufacturer
This series XSD Sand Washing Machines are a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which mixes with the final sand, so sand washing machine can improve the quality of the sand. XSD series Sand washing machine is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factory’s quartz sand and refilling pressure sand.
Working Principle of Sand Washing Machine:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Characteristics of Sand Washing Machine:
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.
Models: XSD2610, XSD2816, XSD3016
Wheel Size (mm): Φ2600×1000
Max feed size (mm): 10
Power (Kw): 5.5
Weight (t): 2.7
Capacity (t/h): 50
Overall dimension (mm): 3255×1982×2690
Wheel Size (mm): Φ2800×1000
Max feed size (mm): 10
Power (Kw): 11
Weight (t): 3
Capacity (t/h): 100
Overall dimension (mm): 3540×3000×2880
Wheel Size (mm): Φ3000×1600
Max feed size (mm): 10
Power (Kw): 15
Weight (t): 3.3
Capacity (t/h): 150
Overall dimension (mm): 3845×3000×3080
Notice: Any change of technical data shall not be advised additionally
Also,our company produces other mining machines and construction machines.Such as:crushers, grinders, mills, sand makinging machines, ect. welcome to enquiry!,Sand washing machine,Sandstone washing machine, Sand washing machine, sand washing equipment, washer, purification machine, sand washer, washer machine, artificial sand washer, sand-washing,Mining machine,river and mountain sand washing,sand scrubber,sand cleaning machine
The national IPR product―Straight Centrifugal Grinder Mill is our latest type which is designed by our experts who have long experience and hard research in mill equipment, which has opened a new time of industrial flour mill with high efficiency and low energy consumption.
Straight Centrifugal Grinder Mill is used to grind various non-inflammable and non-explosive stuff in mining, building, chemical, metallurgical industry, etc. Straight Centrifugal Grinder can grind high, medial and low hardness material whose Moth's hardness is below 9.5,such as silica carbide, zirconium, quartz stone, granite, barite, marble, limestone, soap stone, calcium sulphate stone, slag, ceramic prismatic, glass, etc.
The working principle of straight centrifugal grinder mill:
The motor drives the rollers suspension frame through flywheel and shaft, and the rollers will rotate around the ring with the rollers suspension frame. Deduster will eliminate the dust, at the same tiem, it will also carry away the heat and there is no dust pollution.
The stuff enters the input opening, after distributed by distribute cone, it falls down the ring like the waterfall. It will be grinded to powder by the rollers in turn, discharged from the discharge pipe.
The process assembles the Dry Production; the difference lies in adding water and the dehydration after grinding. This process can be designed according the user's requirements.
,Straight Centrifugal Grinder Mill, Straight centrifugal grinder mill, grinder, milling machine, ball mill, mill equipment, grinding machine, micro powder grinder, grinder accessories, dry and wet grinder, rocky grinder,attritor
Vibrating screen is used to separate the stuff and composed of main frame, screen web, electric motor, eccentric bock, rubber spring, coupler and so on .We will offer suitable type according to your requirements.
Vibrating screen is widely used for classification in mining,construction material,transportation,energy,ect.
YZS Vibrating screen Features: Simple and reliable.
1.No transmission of screen panels.
2.Easy change of screen plates.
3.High screening capacity.
4.Rigid and vibrating resistance screen body.
Models: 2YZS1548, 3YZS1548, 2YZS1848, 3YZS1848, 2YZS1860, 3YZS1860, 2YZS2160, 3YZS2160, 2YZS2460
NO. of layer:2 or 3
Max. feed size(mm):400
Notice: Any change of technical data shall not be advised additionally
,Vibrating screen,Vibratory screen, Vibrating screen, screen machine, screening equipment, sieve, mining machine, mining equipment, screening machinery, screen,vibratory screen,screen machine industry,industry screen,screen machine
HGM series of Three-Ring & Medium-Speed MicroPowder Grinder is a new kind of micro-powder processing equipment, which is invented through more than twenty times experiments and improvements, and based on twenty years of mill manufacture experience while absorbing advanced international machine manufacture techniques. HGM series of Three-Ring & Medium-Speed MicroPowder Grinder is mainly used in processing non-inflammable, non-explosive, brittle material with hardness below six mohs, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, pyrophillite, ceyssatite, barite, gypsum, alunite, granite, fluorite, phosphate rock, kalium ore, float stone, more than 200 kinds of materials.
The motor drives the main shaft and every turnplate through the reducer. The reducer drives dozens of rollers to rotate against race way of ring through pin. Small materials crushed by hammer crusher is transported into hopper by elevator, and then vibrating feeder shall feed material to the central part of upper turnplate evenly. The material falls to circle under the centrifugal force and comes down to raceway of ring to be crushed into powder. After grinded in the first race way, the material goes to the second and third turnplate. The blower inhales the external air into the mill and carries the powder after third turnplate into powder-separator. Turbine in the separator makes the coarse powder drop down and regrinded and the fine powder shall go into cyclone powder collector together with air current and go down through discharge valve as final product; at the same time, air current with a little dusts goes out through blower and muffler after purified by filter.
Capabilities and Characteristics:
Three-Ring & Medium-Speed MicroPowder Mill has high efficiency and low cost. Its capacity is raised by 40% compared with airflow mill and mix mill on the condition that the materials, the drive and the fineness of the final powder are the same. The life span of tear & wear parts is more than that of straight impact crusher and turbine mill under the circumstance of same materials and fineness of the final powder. Usually, its life span is more than one year. There is no rolling bearing and screw in the grinding cavity, so as to avoid the damage to the machine caused by tear & wear of bearing and seals and the looseness of screws. The fineness of powder can reach ≤5μm with d97 once.
,Medium-speed Micro-powder Grinding Mill, grinder, grinder mill, grinding machine, micro powder grinder mill, grinder accessories, dry and wet grinder, rocky grinder,grinders,grinding equipment.,attritor ,super micro mill ,micro mill ,roller mill ,vertical mill ,chinaware ball mill
Sand Making Machine (namely PCL Vertical shaft impact crusher) is of high-power and low-consumption, which is designed depending on several year’s hard work and study of mechanical mining equipment.
Sand Making Machine absorbed the advanced technology of the same products of Barmac Company of America, now is of the international level. Sand Making Machine plays an important role in crushing minerals into pieces. PCL Vertical shaft impact crusher is widely used in all kinds of mineral, cement, corhart, bauxite chmotte, carborundum grain, glass raw material, machine made construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and so on material with features of very hard and anticorrosion. And Sand Making Machine is more productive than other kind of crushers.
Stone less than 50mm enters sand making machine though conveyor belt. Stone is crushed by hitting other stones. Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several times, finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported to sand washing machine, however overlarge material will go back to sand making machine to be recrushed. Output sizes can be made according to customer’s requirement. If input size is larger than the designed size, other crushing equipment will be necessary.
1.Simple structure and low operating cost;
2.High efficiency and low consumption;
3.Has the function of fine crush and crude grinding;
4.Slightly influenced by the moisture content of material, and the max moisture content is 8%;
5.More suitable for crushing mid-hardness and high-hardness materials;
6.Cubic shape of final products, high density of piling up and low iron pollution;
7.More wearable and easy maintenance;
8.Low working noise and light dust pollution.
Models:PCL600 ~ PCL1350
Rotate speed of impeller (r/min): 2000 - 2600
Max feed size (mm): 30
Power (Kw): 2×30
Weight (including motor) (t): 5.6
Output capacity (t/h): 15
Overall dimensions (mm): 2500×1600×2260
Rotate speed of impeller (r/min): 1600 - 2100
Max feed size (mm): 35
Power (Kw): 2×45
Weight (including motor) (t): 7.5
Output capacity (t/h): 25
Overall dimensions (mm): 2780×1800× 2700
Rotate speed of impeller (r/min): 1300 - 1700
Max feed size (mm): 40
Power (Kw): 2×55
Weight (including motor) (t): 12
Output capacity (t/h): 35
Overall dimensions (mm): 3900× 2160×2770
Rotate speed of impeller (r/min): 1100 - 1450
Max feed size (mm): 45
Power (Kw): 2×110
Weight (including motor) (t): 16
Output capacity (t/h): 50
Overall dimensions (mm): 4660×2450×3660
Rotate speed of impeller (r/min): 950 - 1200
Max feed size (mm): 45
Power (Kw): 2×132
Weight (including motor) (t): 22
Output capacity (t/h): 80
Overall dimensions (mm): 5600×2950×4000
Rotate speed of impeller (r/min): 900 - 1200
Max feed size (mm): 50
Power (Kw): 2×160
Weight (including motor) (t): 26
Output capacity (t/h): 100
Overall dimensions (mm): 5340×2940×3650
Notice: Any change of Sand Making Machine technical data shall not be advised additionally
Also,our company produces other mining machines and construction machines.Such as:crushers, grinders, mills, sand washing machines ect. welcome to enquiry!
,Sand making machine,Sand maker, Sand making machine, sand maker,gravel maker,gravel equipment, vertical shaft impact crusher, artificial sand making machine, sand equipment, stone crusher, PCL crusher,gravel processing equipment,sand creator,chemical make up of sand
TGM Series Super Pressure Trapezium Mill is the latest grinding mill. TGM Series Supper Pressure Trapezium Mill is reseached and designed by our experts basing on long term experiences of mill research and development, and following to numbers of customers' using requirements and suggestions home and aboard. The TGM Series Super Pressure Trapezium Mill adopts our patented technologies, like trapezium working surface, flexible connection, roller linked pressure boost, etc. TGM Series Super Pressure Trapezium Mill has reached the advanced international level of powder making equipment manufacturing.
TGM Series Super Pressure Trapezium Mill mainly consists of mainframe, speed reducer, powder seperator, blower, bag filter, pipes, powder collector, motor, etc. The peripheral equipments are jaw crusher, bucket elevator, feeder, hopper, electric control panel, etc. TGM Series Super Pressure Trapezium Mill can grind all kinds of non-flammable and non-explosive minerals with Moh’s hardness lower than 9 and humidity less than 6%，and TGM Series Super Pressure Trapezium Mill is widely used in metallurgy, manufacture of building materials, chemical industry, mining industry, etc.
Large materials are crushed by Jaw crusher to the needed sizes firstly, then the materials are elevated to storage hopper by bucket elevator, third, the materials are fed into the grinding chamber for grinding by vibrating feeder equably and continuously. The powder after grinding goes upwards together with the airflow, after seperating by powder seperator, those which can meet the fineness requirement enters into the cyclone powder collector through pipe together with the airflow, and then discharged from the discharge valve as final products. The airflow is sucked into centrifugal blower through wind recycling pipe at the upper part of cyclone powder collector. The mainframe is drived by the speed reducer through the central axis in the mill.The quincunx stand connected with the upper part of central axis, at the quincunx stand, rollers are set and by which the vibrating pivot formed. Below the quincunx stand and rollers there is shoval system. Materials are fed into the space between rollers and shovels when they are turning, and then be grinded by the pressure produced when rollers are turning, thus powder is made.
The diameters of each part of rollers and rings are different, the upper part is big and the lower part is small, then they formed a trapezium form. This form can reduce materials’ sliding speed downwards and prolong the grinding time for materials, thus the grinding efficiency is increased.; the pressing springs have the functions of balancing and pressure increasing; the flexible connection can make the mill stable, decrease the shocking and avoid sympathetic vibration; high density powder seperator impeller decreases the air resistance and increases powder collecting fineness and capacity; the efficiency of energy saving and high efficient centrifugal blower is as high as 83%.
Max input size(mm):<35
Final size(mm):1.6-0.045mini fineness is 0.038
,Super Pressure Trapezium Grinding Mill(CE), Super Pressure Trapezium Grinding Mill, grinder mill, grinder, grinding machine, mill, grinding mill, dry and wet grinder, rocky grinder,materil handling equipment,stoneworking machine,mill equipment,attritor
High Pressure Suspension Mill is a new kind of mill, which is invented with great concentration and on the basis of many years of powder processing experiences.
This invention starts an epoch of high efficiency and low cost in international mining industry. High Pressure Suspension Mill can be used to grind non-inflammable and non-explosive materials with Moh’s hardness below 9.3 and moisture content below 6%, such as barite, limestone, pottery, scoria. Size of final products can be adjusted between 80-425 mesh (The fineness can reach 1000 mesh).High Pressure Suspension Mill can produce coarse powder between 30-80 mesh by adding special equipment. This machine is widely used in the fields like mining, chemical industry, construction materials, metallurgy, etc.
In the mainframe of High Pressure Suspension Mill, there are strong springs with pressure as high as1000-1500 kg equipped on the roller suspender. When High Pressure Suspension Mill works, the roller rotates around the principal axis, and clings to ring under the effect of the strong spring and eccentricity. Its press is 1.2 times of Raymond mill under the same press condition, so the production is largely increased. When the materials are sent into the grinding chamber, they are brought to the space between the roller and ring and get grinded. Then the powder grinded will be blown into separator. The fine powder after departed with the air is discharged through the outlet as final product. The large-sized powder falls back for regrinding. The air will be back to the blower for repetition of the above process. The left air wil come to thel bag filter to get cleaned. When the wear and tear between roller and the ring reaches certain degree, adjust the length of the strong spring,, so to keep the invariable pressure between the roller and the ring, to make sure the stable production and the fineness.
1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh) □0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
3. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
4. The separator can be adjusted very easily.
5. The multi-class seals are adopted to keep the grinding equipment tightly closed.
,High Pressure Suspension Grinder Mill(CE), High pressure suspension grinder mill, grinder, milling machine, ball mill, mill equipment, grinding machine, suspension grinder, grinding mill, grinder accessories, dry and wet grinder, rocky grinder,attritor